【K8S】 Kubeadm 快速搭建 K8S V1.24.1 高可用集群（Containerd 1.6.6 + Calico 3.23.1）

源活水

已于 2022-06-24 21:48:32 修改

阅读量3.7k

点赞数 2

分类专栏：云原生技术文章标签： k8s containerd calico kubeadm 高可用

于 2022-06-11 01:25:54 首次发布

本文为博主原创文章，未经博主允许不得转载。

本文链接：https://blog.csdn.net/liuqinyuan92/article/details/125229624

版权

云原生技术专栏收录该内容

5 篇文章 0 订阅

订阅专栏

1. 资源规划

链接: K8S社区 | K8S中文社区 | K8S安装文档

环境要求:

3 台 Linux 主机：基于 Debian 或 Red Hat 的发行版
2C2G 及以上主机配置
集群节点之间网络畅通（公网或内网网络均可）
唯一的主机名、MAC 地址、product_uuid
指定端口无占用
关闭 swap，以保障 kubelet 正常工作
安装containerd 的目录使用 ext4 文件系统（xfs 文件系统，会出现无法创建 snapshot 的问题）

集群规划（常规）:

操作系统	主机 IP	主机名	主机配置	角色
CentOS 8.2	10.206.0.7	k8s-node-01	4C8G64GB	master
CentOS 8.2	10.206.32.12	k8s-node-02	4C8G64GB	work
CentOS 8.2	10.206.32.16	k8s-node-03	4C8G64GB	work

集群规划（高可用）:

操作系统	主机 IP	主机名	主机配置	角色
CentOS 8.2	10.206.0.7	k8s-node-01	4C8G64GB	worker
CentOS 8.2	10.206.32.12	k8s-node-02	4C8G64GB	master
CentOS 8.2	10.206.32.16	k8s-node-03	4C8G64GB	master

说明 1：查看系统版本信息

$ hostnamectl

说明 2：查看 CPU 信息

$ lscpu

说明 3：查看内存信息

$ cat /proc/meminfo

说明 4：查询主机发行版的方式

$ cat /etc/redhat-release

说明 5：获取主机名、MAC 地址、product_uuid 的方式

# 获取主机名
$ hostname

# 获取 MAC 地址
$ ifconfig

# 获取产品 UUID
$ cat /sys/class/dmi/id/product_uuid

说明 6：检测端口是否占用

$ nc ip port

说明 7：判断目录的文件系统

$ df -T

说明 8：K8S占用端口列表

端口范围	协议	组件
6443	TCP	api-server
2379-2380	TCP	etcd
10250	TCP	kubelet
10259	TCP	kube-scheduler
10257	TCP	kube-controller-manager
30000-32767	TCP	kubelet
179	TCP	calico

2. 环境准备

所有节点均需要执行

2.1. 主机配置

1）关闭防火墙

$ systemctl stop firewalld
$ systemctl disable firewalld

2）关闭 selinux

# 临时关闭
$ setenforce 0 
# 永久关闭
$ sed -i 's/enforcing/disabled/' /etc/selinux/config

3）关闭 swap

# 临时
$ swapoff -a 
# 永久关闭
$ sed -ri 's/.*swap.*/#&/' /etc/fstab

4）修改主机名

# 根据规划设置主机名【node-01节点上操作】
$ hostnamectl set-hostname k8s-node-01
# 根据规划设置主机名【node-02节点操作】
$ hostnamectl set-hostname k8s-node-02
# 根据规划设置主机名【node-03节点操作】
$ hostnamectl set-hostname k8s-node-03

5）配置 Host

# 在所有节点添加hosts
$ cat >> /etc/hosts << EOF
10.206.0.7   k8s-node-01
10.206.32.12 k8s-node-02
10.206.32.16 k8s-node-03
EOF

6）时间同步

$ yum install chrony -y
$ systemctl start chronyd
$ systemctl enable chronyd
$ chronyc sources

7）设置内核参数

# 设置内核参数，注意和/etc/sysctl.conf等文件中的重复项冲突
$ cat > /etc/sysctl.d/99-kubernetes-cri.conf <<EOF
net.bridge.bridge-nf-call-iptables  = 1
net.ipv4.ip_forward                 = 1
net.bridge.bridge-nf-call-ip6tables = 1
vm.swappiness=0
EOF

# 生效
$ sysctl --system

8）设置网络参数

# 加载 overlay 模块
$ modprobe overlay
# 加载 br_netfilter 模块
$ modprobe br_netfilter

9）安装 ipvsadm

# 安装ipvsadm,并设置ipvs模块自启
yum install ipvsadm -y
 
$ cat > /etc/sysconfig/modules/ipvs.modules << EOF
/sbin/modinfo -F filename ip_vs > /dev/null 2>&1
if [ $? -eq 0 ];then
 /sbin/modprobe ip_vs
fi
EOF

$ systemctl daemon-reload
$ systemctl enable ipvsadm
$ systemctl restart ipvsam

2.2. 安装 containerd

containerd 简介

containerd 是一个工业级标准的容器运行时，它强调简单性、健壮性和可移植性。containerd 可以在宿主机中管理完整的容器生命周期，包括容器镜像的传输和存储、容器的执行和管理、存储和网络等。

docker vs containerd

containerd 是从 docker 中分离出来的一个项目，可以作为一个底层容器运行时，现在它成了 Kubernete 容器运行时更好的选择。从 1.24 开始，K8S 已取消 docker 作为其默认运行时。

K8S 为什么要放弃使用 docker 作为容器运行时

使用 docker 作为 K8S 容器运行时的话，kubelet 需要先要通过 dockershim 去调用 docker，再通过 docker 去调用 containerd。

使用 containerd 作为 K8S 容器运行时的话，由于 containerd 内置了 CRI （Container Runtime Interface：容器运行时接口）插件，kubelet 可以直接调用 containerd。

1）安装依赖

$ yum install yum-utils device-mapper-persistent-data lvm2 iproute-tc -y

2）添加 yum 源

$ yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

3）安装 containerd

$ yum install containerd.io-1.6.6-3.1.el8.x86_64 -y

4）生成配置文件

containerd config default > /etc/containerd/config.toml

5）修改配置文件

# 修改 cgroups 为 systemd
sed -i 's#SystemdCgroup = false#SystemdCgroup = true#' /etc/containerd/config.toml

# 修改 pause 镜像地址
sed -i 's#k8s.gcr.io#registry.aliyuncs.com/google_containers#' /etc/containerd/config.toml

# 修改容器存储路径到空间比较充裕的路径
root = "/var/lib/containerd"

注意：一定要修改 sandbox_image镜像地址，否则会由于防火墙问题，导致 kubelet 启动时无法加载镜像

6）配置 crictl

# 配置文件地址 /etc/crictl.yaml，修改 sock 地址
$ cat <<EOF> /etc/crictl.yaml 
runtime-endpoint: unix:///run/containerd/containerd.sock
image-endpoint: unix:///run/containerd/containerd.sock
timeout: 10
debug: false
EOF

7）启动服务

$ systemctl enable containerd
$ systemctl daemon-reload
$ systemctl restart containerd

8）查看状态

$ systemctl status containerd

说明 1：使用 ctr 管理容器运行时

COMMANDS:
   attach              Attach to a running container
   create              Create a new container
   exec                Run a command in a running container
   version             Display runtime version information
   images, image, img  List images
   inspect             Display the status of one or more containers
   inspecti            Return the status of one or more images
   imagefsinfo         Return image filesystem info
   inspectp            Display the status of one or more pods
   logs                Fetch the logs of a container
   port-forward        Forward local port to a pod
   ps                  List containers
   pull                Pull an image from a registry
   run                 Run a new container inside a sandbox
   runp                Run a new pod
   rm                  Remove one or more containers
   rmi                 Remove one or more images
   rmp                 Remove one or more pods
   pods                List pods
   start               Start one or more created containers
   info                Display information of the container runtime
   stop                Stop one or more running containers
   stopp               Stop one or more running pods
   update              Update one or more running containers
   config              Get and set crictl client configuration options
   stats               List container(s) resource usage statistics
   completion          Output shell completion code
   help, h             Shows a list of commands or help for one command

说明 2：使用 crictl 管理容器运行时

COMMANDS:
   attach              Attach to a running container
   create              Create a new container
   exec                Run a command in a running container
   version             Display runtime version information
   images, image, img  List images
   inspect             Display the status of one or more containers
   inspecti            Return the status of one or more images
   imagefsinfo         Return image filesystem info
   inspectp            Display the status of one or more pods
   logs                Fetch the logs of a container
   port-forward        Forward local port to a pod
   ps                  List containers
   pull                Pull an image from a registry
   run                 Run a new container inside a sandbox
   runp                Run a new pod
   rm                  Remove one or more containers
   rmi                 Remove one or more images
   rmp                 Remove one or more pods
   pods                List pods
   start               Start one or more created containers
   info                Display information of the container runtime
   stop                Stop one or more running containers
   stopp               Stop one or more running pods
   update              Update one or more running containers
   config              Get and set crictl client configuration options
   stats               List container(s) resource usage statistics
   completion          Output shell completion code
   help, h             Shows a list of commands or help for one command

2.3. 安装 kubeadm、kubelet、kubectl

kubeadm：用来初始化集群
- kubeadm init 启动引导一个 Kubernetes 主节点
- kubeadm join 启动引导一个 Kubernetes 工作节点并且将其加入到集群
- kubeadm token 使用 kubeadm join 来管理令牌
- kubeadm reset 还原之前使用 kubeadm init 或者 kubeadm join 对节点所作改变
kubelet：在集群中的每个节点上用来启动 Pod 和容器等
kubectl：用来与集群通信的命令行工具

1）配置 yum 源

$ cat > /etc/yum.repos.d/kubernetes.repo << EOF
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

2）安装

# 安装组件
$ yum install -y iproute-tc
$ yum install kubectl-1.24.1-0.x86_64 kubelet-1.24.1-0.x86_64 kubeadm-1.24.1-0.x86_64 -y

# 设置开机启动
$ systemctl enable kubelet
$ systemctl daemon-reload
$ systemctl restart kubelet

3. 安装集群

3.1. 安装 K8S

3.1.1. 常规集群（单 Master）

常规集群：单 Master 节点，资源占用少，有单点风险，不建议生产使用

3.1.1.1. 初始化 Master 节点

在 Master 节点执行

方法一：通过配置文件初始化，不推荐采用该方案

1）生成并修改配置文件

# 生成配置文件
$ mkdir /app
$ kubeadm config print init-defaults > kubeadm.yaml

修改如下配置：

advertiseAddress：为控制切面地址，（ Master 主机 IP ）
criSocket：为 containerd 的 socket 文件地址
imageRepository：阿里云镜像代理地址，否则拉取镜像会失败
kubernetesVersion：为 k8s 版本

注意：一定要配置镜像代理，否则会由于防火墙问题导致集群安装失败

修改后配置文件如下：

apiVersion: kubeadm.k8s.io/v1beta3
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  # 控制切面的IP地址
  advertiseAddress: 10.206.0.7
  bindPort: 6443
nodeRegistration:
  # 容器运行时 socket 文件地址
  criSocket: unix:///var/run/containerd/containerd.sock
  imagePullPolicy: IfNotPresent
  # 控制面主机名，可省略
  name: k8s-node-01
  taints: 
  - effect: NoSchedule
    key: node-role.kubernetes.io/master
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta3
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns: {}
etcd:
  local:
    dataDir: /var/lib/etcd
# 镜像服务地址
imageRepository: registry.aliyuncs.com/google_containers
kind: ClusterConfiguration
# K8S 版本
kubernetesVersion: 1.24.1
networking:
  dnsDomain: cluster.local
  # service 的网段
  serviceSubnet: 10.96.0.0/16
scheduler: {}
---
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
cgroupDriver: systemd

2）初始化 K8S 集群

# 查看所需镜像列表
$ kubeadm config images list --config /app/kubeadm.yml
# 拉取镜像
$ kubeadm config images pull --config /app/kubeadm.yml
# 根据配置文件启动 kubeadm 初始化 k8s
$ kubeadm init --config=/app/kubeadm.yml --upload-certs --v=6

方法二：通过命令初始化

参数	作用	缺省	配置
–apiserver-advertise-address	apiserver 绑定的 IP		Master 主机 IP
–apiserver-bind-port	apiserver 监听的端口	6443	6443
–cri-socket	CRI socket 文件路径		“unix:///var/run/containerd/containerd.sock”
–control-plane-endpoint	控制面地址		master_vip:6440
–image-repository	选择拉取镜像的仓库	k8s.gcr.io	registry.aliyuncs.com/google_containers
–kubernetes-version	选择K8S版本	stable-1	1.24.1
–pod-network-cidr	指定 pod 的网络		10.96.0.0/16
–service-cidr	指定service 的IP 范围	10.96.0.0/12	10.95.0.0/16

注意1：单 master 节点时不需要配置 control-plane-endpoint，多 master 节点时必须配置
注意2：一定要配置镜像代理，否则会由于防火墙问题导致集群安装失败

命令执行

kubeadm init --apiserver-advertise-address=10.206.0.7 --apiserver-bind-port=6443 --cri-socket="unix:///var/run/containerd/containerd.sock" --image-repository registry.aliyuncs.com/google_containers  --kubernetes-version=1.24.1 --pod-network-cidr=10.96.0.0/16  --service-cidr=10.95.0.0/16

执行结果

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 10.206.32.12:6443 --token abcdef.0123456789abcdef --discovery-token-ca-cert-hash sha256:68d48107177ec63c7e36276e2087b00767884c56304fff8ab013efbe498cd61b

说明 1：加入指令可以通过如下命令重复获取

$ kubeadm token create --print-join-command

说明 2：初始化失败可以用 reset 指令重置，解决问题后重新初始化

$ kubeadm reset

说明 3：查看日志

$ journalctl -f -u kubelet

说明 4：token 失效处理

# 重新生成token
$ kubeadm token create
abcdef.0123456789abcdef 

# 获取ca证书sha256编码hash值
$ openssl x509 -pubkey -in /etc/kubernetes/pki/ca.crt | openssl rsa -pubin -outform der 2>/dev/null | openssl dgst -sha256 -hex | sed 's/^.* //'
b615fccddcd4e80fc6f9c5e477bfc7a053b017660b73fdeccf89c559739664d7

# 将新的node节点加入到k8s集群中
kubeadm join node主机ip地址:6443 --token abcdef.0123456789abcdef \
    --discovery-token-ca-cert-hash sha256:b615fccddcd4e80fc6f9c5e477bfc7a053b017660b73fdeccf89c559739664d7

3.1.1.2. 添加 Worker 节点

在 Worker 节点执行

$ kubeadm join 10.206.32.12:6443 --token abcdef.0123456789abcdef --discovery-token-ca-cert-hash sha256:68d48107177ec63c7e36276e2087b00767884c56304fff8ab013efbe498cd61b

执行结果

[preflight] Running pre-flight checks
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

说明 1：如果初始化过程不顺利，可以添加日志输出

$ kubeadm join 10.206.32.12:6443 --token abcdef.0123456789abcdef --discovery-token-ca-cert-hash sha256:68d48107177ec63c7e36276e2087b00767884c56304fff8ab013efbe498cd61b --v=6

3.1.2. 高可用集群（多 Master）

高可用集群：有多个 Master 节点，避免单点风险

3.1.2.1. 安装配置 VIP+Keepalived+Haproxy

1）配置 VIP 绑定到所有 Master 节点（云厂商提供 VIP 配置界面，也可以选用成本更高，性能更好的硬件 F5）
VIP
2）在所有 Master 节点上安装 Keepalived 服务

yum install keepalived -y
systemctl daemon-reload
systemctl enable keepalived

修改配置文件：

vim /etc/keepalived/keepalived.conf

# 替换为如下配置
global_defs {
   router_id GA_K8S
}

vrrp_instance VI_1 {
    # 节点类型（master或 backup，1 个集群只有 1 个 master角色，其它为 backup 角色）
    state MASTER
    # 绑定的网卡
    interface eth0
    virtual_router_id 200
    # 优先级，值越大，优先级越高
    priority 100
    nopreempt
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass jdvm2vm8weiyhlwa
    }
    virtual_ipaddress {
        # VIP 地址
        10.206.32.18
    }
}

systemctl restart keepalived

3）安装 Haproxy

yum install -y haproxy
systemctl daemon-reload
systemctl enable haproxy

修改配置文件：

vim vim /etc/haproxy/haproxy.cfg

# 替换为如下配置

#---------------------------------------------------------------------
# Global settings
#---------------------------------------------------------------------
#---------------------------------------------------------------------
# Global settings
#---------------------------------------------------------------------
global
    log         127.0.0.1 local2

    chroot      /var/lib/haproxy
    pidfile     /var/run/haproxy.pid
    maxconn     4000
    user        haproxy
    group       haproxy
    daemon

    # turn on stats unix socket
    stats socket /var/lib/haproxy/stats

#---------------------------------------------------------------------
# common defaults that all the 'listen' and 'backend' sections will
# use if not designated in their block
#---------------------------------------------------------------------
defaults
    mode                    http
    log                     global
    option                  httplog
    option                  dontlognull
    option http-server-close
    option forwardfor       except 127.0.0.0/8
    option                  redispatch
    retries                 3
    timeout http-request    10s
    timeout queue           1m
    timeout connect         10s
    timeout client          1m
    timeout server          1m
    timeout http-keep-alive 10s
    timeout check           10s
    maxconn                 3000

listen stats
    mode http
    bind *:7000
    stats enable
    stats uri
    
#---------------------------------------------------------------------
# k8s-api frontend which proxys to the backends
#---------------------------------------------------------------------
frontend  k8s-api
  # 本机 ha 服务暴露地址，不同节点，配置 IP 不一样
  bind 10.206.32.16:6443
  bind 127.0.0.1:6443
  mode tcp
  option tcplog
  default_backend k8s-api



#---------------------------------------------------------------------
# round robin balancing between the various backends
#---------------------------------------------------------------------
backend k8s-api
    mode tcp
    option tcplog
    option tcp-check
    balance     roundrobin
    #  k8s 集群，api-server 的地址列表
    server  k8s-api-1 10.206.0.7:6443   check
    server  k8s-api-2 10.206.32.12:6443 check
    server  k8s-api-3 10.206.32.16:6443 check

systemctl restart haproxy

说明 1：查看 Keepalived 的服务状态

systemctl status keepalived

说明 2：查看 haproxy 的服务状态

systemctl status haproxy

3.1.2.2. 安装配置 Haproxy（单节点模拟 VIP）

本次由于没有 VIP，演示高可用集群效果，因此采用单节点 Haproxy 模拟 VIP ，生产不建议这样用，这种方式又会引入 HA 的单点风险

1）安装 Haproxy

$ yum install -y haproxy
$ systemctl enable haproxy
$ systemctl daemon-reload

2）配置 Haproxy

$ vim /etc/haproxy/haproxy.conf

# 添加如下配置
frontend  k8s-api
  # 本机 ha 服务暴露地址，不同节点，配置 IP 不一样
  bind 10.206.32.12:6440
  bind 127.0.0.1:6440
  mode tcp
  option tcplog
  default_backend k8s-api

backend k8s-api
    mode tcp
    option tcplog
    option tcp-check
    balance     roundrobin
    #  k8s 集群，api-server 的地址列表
    server  k8s-api-1 10.206.0.7:6443   check
    server  k8s-api-2 10.206.32.12:6443 check
    server  k8s-api-3 10.206.32.16:6443 check

3）查看状态

$ systemctl status haproxy

3.1.2.3. 初始化 Master 节点

在初始 Master 节点执行

命令执行

kubeadm init --apiserver-advertise-address=10.206.32.12 --apiserver-bind-port=6443 --cri-socket="unix:///var/run/containerd/containerd.sock" --control-plane-endpoint=10.206.32.12:6440 --image-repository registry.aliyuncs.com/google_containers  --kubernetes-version=1.24.1 --pod-network-cidr=10.96.0.0/16  --service-cidr=10.95.0.0/16 --upload-certs

执行结果

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of the control-plane node running the following command on each as root:

  kubeadm join 10.206.32.12:6440 --token rrm7vb.u5qceu1p8gwzgptu \
        --discovery-token-ca-cert-hash sha256:a612e48dd14d5a19eba3cf30531c7134b4c83fe2098cb32c6ca6196cb289de8b \
        --control-plane --certificate-key b65ed82bec66c20342e3a5e013408520f23c0f66f413729139e0c6e6f978c88a

Please note that the certificate-key gives access to cluster sensitive data, keep it secret!
As a safeguard, uploaded-certs will be deleted in two hours; If necessary, you can use
"kubeadm init phase upload-certs --upload-certs" to reload certs afterward.

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 10.206.32.12:6440 --token rrm7vb.u5qceu1p8gwzgptu \
        --discovery-token-ca-cert-hash sha256:a612e48dd14d5a19eba3cf30531c7134b4c83fe2098cb32c6ca6196cb289de8b

3.1.2.4. 加入 Master 节点

执行命令

$ kubeadm join 10.206.32.12:6440 --token rrm7vb.u5qceu1p8gwzgptu --discovery-token-ca-cert-hash sha256:a612e48dd14d5a19eba3cf30531c7134b4c83fe2098cb32c6ca6196cb289de8b --control-plane --certificate-key b65ed82bec66c20342e3a5e013408520f23c0f66f413729139e0c6e6f978c88a

执行结果

[preflight] Running pre-flight checks
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

3.1.2.5. 加入 Worker 节点

执行命令

$ kubeadm join 10.206.32.12:6440 --token rrm7vb.u5qceu1p8gwzgptu --discovery-token-ca-cert-hash sha256:a612e48dd14d5a19eba3cf30531c7134b4c83fe2098cb32c6ca6196cb289de8b

执行结果

[preflight] Running pre-flight checks
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

3.1.2.6. 集群效果

$ kubectl get po -A
NAMESPACE     NAME                                  READY   STATUS    RESTARTS      AGE     IP             NODE          NOMINATED NODE   READINESS GATES
kube-system   coredns-74586cf9b6-cwhmr              0/1     Pending   0             18m     <none>         <none>        <none>           <none>
kube-system   coredns-74586cf9b6-jdzdw              0/1     Pending   0             18m     <none>         <none>        <none>           <none>
kube-system   etcd-k8s-node-02                      1/1     Running   4             19m     10.206.32.12   k8s-node-02   <none>           <none>
kube-system   etcd-k8s-node-03                      1/1     Running   0             10m     10.206.32.16   k8s-node-03   <none>           <none>
kube-system   kube-apiserver-k8s-node-02            1/1     Running   4             19m     10.206.32.12   k8s-node-02   <none>           <none>
kube-system   kube-apiserver-k8s-node-03            1/1     Running   1 (10m ago)   10m     10.206.32.16   k8s-node-03   <none>           <none>
kube-system   kube-controller-manager-k8s-node-02   1/1     Running   5             19m     10.206.32.12   k8s-node-02   <none>           <none>
kube-system   kube-controller-manager-k8s-node-03   1/1     Running   0             9m47s   10.206.32.16   k8s-node-03   <none>           <none>
kube-system   kube-proxy-nwsxm                      1/1     Running   0             10m     10.206.32.16   k8s-node-03   <none>           <none>
kube-system   kube-proxy-pw9b5                      1/1     Running   0             5m49s   10.206.0.7     k8s-node-01   <none>           <none>
kube-system   kube-proxy-t4jn6                      1/1     Running   0             18m     10.206.32.12   k8s-node-02   <none>           <none>
kube-system   kube-scheduler-k8s-node-02            1/1     Running   5             19m     10.206.32.12   k8s-node-02   <none>           <none>
kube-system   kube-scheduler-k8s-node-03            1/1     Running   0             10m     10.206.32.16   k8s-node-03   <none>           <none>

可以看到关键服务已经做到双活，集群创建成功，但是集群尚未就绪，需要接下来安装网络组件

3.2. 配置 kubectl

配置 master 节点

$ rm -rf ~/.kube/config
$ mkdir ~/,kube
$ cp -i /etc/kubernetes/admin.conf ~/.kube/config
$ kubectl cluster-info

3.3. 安装 calico

在 Master 节点执行

1）下载安装 yaml

$ curl -o /app/calico.yaml https://docs.projectcalico.org/manifests/calico.yaml

2）修改calico.yaml里的pod网段。

$ vim /app/calico.yaml

# 把calico.yaml里pod所在网段改成kubeadm init时所指定的网段，
# 原配置
# no effect. This should fall within `--cluster-cidr`.
# - name: CALICO_IPV4POOL_CIDR
#   value: "192.168.0.0/16"
# Disable file logging so `kubectl logs` works.
- name: CALICO_DISABLE_FILE_LOGGING
value: "true"

# 修改后的配置
# no effect. This should fall within `--cluster-cidr`.
- name: CALICO_IPV4POOL_CIDR
  value: "10.96.0.0/16"
# Disable file logging so `kubectl logs` works.
- name: CALICO_DISABLE_FILE_LOGGING
  value: "true"

注意：修改时注意缩进

3）安装

$ kubectl apply -f /app/calico.yaml

4）验证
结果（Node Ready）

$ kubectl get nodes -o wide
NAME          STATUS   ROLES           AGE     VERSION   INTERNAL-IP    EXTERNAL-IP   OS-IMAGE                KERNEL-VERSION                CONTAINER-RUNTIME
k8s-node-01   Ready    <none>          9m42s   v1.24.1   10.206.0.7     <none>        CentOS Linux 8          4.18.0-348.7.1.el8_5.x86_64   containerd://1.6.6
k8s-node-02   Ready    control-plane   22m     v1.24.1   10.206.32.12   <none>        CentOS Linux 8 (Core)   4.18.0-348.7.1.el8_5.x86_64   containerd://1.6.6
k8s-node-03   Ready    control-plane   14m     v1.24.1   10.206.32.16   <none>        CentOS Linux 8 (Core)   4.18.0-348.7.1.el8_5.x86_64   containerd://1.6.6

结果（Pod Running)

$ kubectl get po -A -o wide | grep calico
kube-system   calico-kube-controllers-56cdb7c587-prjs5   1/1     Running   0             65s   10.96.154.193   k8s-node-01   <none>           <none>
kube-system   calico-node-mgcjk                          1/1     Running   0             65s   10.206.32.12    k8s-node-02   <none>           <none>
kube-system   calico-node-qc6fx                          1/1     Running   0             65s   10.206.0.7      k8s-node-01   <none>           <none>
kube-system   calico-node-rpfz4                          1/1     Running   0             65s   10.206.32.16    k8s-node-03   <none>           <none>

4. 集群管理

4.1. 管理集群

为节点打标签

# 查询
kubectl describe node k8s-node-02

# 添加
kubectl label node k8s-node-01 node-role.kubernetes.io/worker=true
kubectl label node k8s-node-02 node-role.kubernetes.io/master=true
kubectl label node k8s-node-03 node-role.kubernetes.io/master=true

# 删除
kubectl label node k8s-node-03 node-role.kubernetes.io/master-

# 效果
kubectl get nodes

为节点加污点

# 查看
kubectl describe node k8s-node-02

# 添加
kubectl taint node k8s-node-02 node-role.kubernetes.io/master=true:NoSchedule

# 删除
kubectl taint node k8snode01 node-role.kubernetes.io/master=true:NoSchedule-

4.2. 测试集群

# 部署 nginx 服务
kubectl create deployment nginx --image=nginx

# 查看状态
kubectl get po -A | grep nginx

# 暴露端口
kubectl expose deployment nginx --port=80 --type=NodePort

# 查看端口
kubectl get svc | grep nginx

# 访问服务
curl http://k8s-node-01:30493/

4.3. 网络工具

由于常用应用镜像里面缺少各种网络工具，难以定位问题，因此部署 busybox 服务，便于定位节点网络问题

# 创建 yaml 文件
cat <<EOF > /app/busybox.yaml
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: busybox-test
  namespace: default
spec:
  selector:
    matchLabels:
      name: busybox-test
  template:
    metadata:
      labels:
        name: busybox-test
    spec:
      containers:
      - name: app
        image: busybox
        command:
          - sleep
          - "3600"
        imagePullPolicy: IfNotPresent
      terminationGracePeriodSeconds: 30
EOF

# 启动服务
kubectl apply -f /app/busybox.yaml

# 查看服务
kubectl get po -A -o wide | grep busybox

# 进入 pod，定位节点问题
kubectl exec -ti <<POD 名称>> sh -n default

4. 安装 Dashbord

在 Master 节点安装可视化控制台，方便日常监控使用，项目地址：点击跳转

1）下载配置文件

curl -o /app/dashboard.yaml https://raw.githubusercontent.com/kubernetes/dashboard/v2.6.0/aio/deploy/recommended.yaml

2）暴露服务

# dashboard.yaml 添加如下配置
kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
spec:
  type: NodePort
  ports:
    - port: 443
      targetPort: 8443
      nodePort: 30443
  selector:
    k8s-app: kubernetes-dashboard

3）创建用户，获取 token

cat <<EOF > /app/admin-user.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
  name: admin-user
  namespace: kubernetes-dashboard
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: admin-user
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cluster-admin
subjects:
- kind: ServiceAccount
  name: admin-user
  namespace: kubernetes-dashboard
EOF

kubectl apply -f /app/admin-user.yaml

4）生成 token

kubectl -n kubernetes-dashboard create token admin-user

5）配置 token

配置入口
访问界面

5. K8S 集群卸载

下面操作中的 docker 卸载，为运行时是 docker 的 K8S 集群

# 重置 K8S 节点
sudo kubeadm reset -f

# 停止服务
sudo systemctl stop kubelet
sudo systemctl stop containerd
sudo systemctl stop docker
sudo systemctl disable kubelet
sudo systemctl disable containerd
sudo systemctl disable docker

# 卸载服务
yum -y remove kubelet kubeadm kubectl containerd docker-ce docker-ce-cli docker-scan-plugin

# 删除资源文件
sudo rm -rf ~/.kube/

sudo rm -rf /etc/cni
sudo rm -rf /etc/crictl.yml
sudo rm -rf /etc/docker
sudo rm -rf /etc/kubernetes
sudo rm -rf /etc/containers
sudo rm -rf /etc/containerd

sudo rm -rf /usr/bin/kube*
sudo rm -rf /usr/bin/docker*
sudo rm -rf /usr/bin/container*
sudo rm -rf /usr/bin/crictl*
sudo rm -rf /usr/bin/crio*
sudo rm -rf /usr/local/bin/kube*
sudo rm -rf /usr/local/bin/docker*
sudo rm -rf /usr/local/bin/container*
sudo rm -rf /usr/local/bin/crictl*
sudo rm -rf /usr/local/bin/crio*

sudo rm -rf /opt/cni
sudo rm -rf /opt/containerd

sudo rm -rf /var/etcd
sudo rm -rf /var/lib/etcd
sudo rm -rf /var/lib/calico
sudo rm -rf /var/lib/cni
sudo rm -rf /var/lib/container*
sudo rm -rf /var/lib/kubelet
sudo rm -rf /var/lib/docker*
sudo rm -rf /var/lib/yurttunnel-server

sudo rm -rf /run/docker*
sudo rm -rf /run/calico*
sudo rm -rf /run/crio*
sudo rm -rf /var/run/container*

# 重新加载
sudo systemctl daemon-reload

# 清理 Iptables
sudo iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X
sysctl net.bridge.bridge-nf-call-iptables=1

# 卸载虚拟网卡
sudo ip link del cni0
sudo ip link del flannel.1

6. 常见问题

6.1. Pod 已启动，但是 Pod 内无法 Ping 外网域名

故障现象：Pod 内无法 ping 通外网域名，访问外网 IP、K8S 内部域名或者IP均正常
问题原因：CoreDNS 解析问题
解决方案：删除 CoreDNS，重新创建 CoreDNS
具体步骤：
1）删除已有 Coredns 服务：

kubectl delete --namespace=kube-system deployment coredns

2）重新安装

wget https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/coredns.yaml.sed
wget https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/deploy.sh
chmod +x /app/deploy.sh
/app/deploy.sh | kubectl apply -f -

总结

通过本博客，基本掌握 K8S 普通集群和高可用集群的从 0 到 1 的搭建，在搭建过程中，需要注意的是由于防火墙问题导致的集群部署失败，一定要注意文中标注的几个镜像仓库配置步骤，避免浪费时间。

接下来的分享计划：

多种容器运行时的异同和原理：Dokcer、Containerd、Podman、CRI-O 等
多种容器网络组件的异同和原理：Flannel、Calico、CNI 等
K8S 的资源对象及使用

欢迎大家交流，WX公众号：源圈

源活水

关注

2
点赞
踩
21

收藏

觉得还不错? 一键收藏
0
评论
【K8S】 Kubeadm 快速搭建 K8S V1.24.1 高可用集群（Containerd 1.6.6 + Calico 3.23.1）

基于 Kubeadm 在 CentOS8.2 上安装最新 K8S V1.24.1 + Containerd 1.6.6 + Calico 集群
复制链接

扫一扫