ARM架构显示寄存器的详细信息

 

void show_regs(struct pt_regs * regs)
{
	printk("\n");
	printk("Pid: %d, comm: %20s\n", task_pid_nr(current), current->comm);
	__show_regs(regs);
	dump_stack();
}

 

void __show_regs(struct pt_regs *regs)
{
	unsigned long flags;
	char buf[64];
        // 首先打印CPU的相关信息
	printk("CPU: %d    %s  (%s %.*s)\n",
		raw_smp_processor_id(), print_tainted(),
		init_utsname()->release,
		(int)strcspn(init_utsname()->version, " "),
		init_utsname()->version);
	print_symbol("PC is at %s\n", instruction_pointer(regs));
	print_symbol("LR is at %s\n", regs->ARM_lr);
        //关键寄存器PC，SP等
	printk("pc : [<%08lx>]    lr : [<%08lx>]    psr: %08lx\n"
	       "sp : %08lx  ip : %08lx  fp : %08lx\n",
		regs->ARM_pc, regs->ARM_lr, regs->ARM_cpsr,
		regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
	printk("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
		regs->ARM_r10, regs->ARM_r9,
		regs->ARM_r8);
	printk("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
		regs->ARM_r7, regs->ARM_r6,
		regs->ARM_r5, regs->ARM_r4);
	printk("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
		regs->ARM_r3, regs->ARM_r2,
		regs->ARM_r1, regs->ARM_r0);
        // 状态寄存器信息
	flags = regs->ARM_cpsr;
	buf[0] = flags & PSR_N_BIT ? 'N' : 'n';
	buf[1] = flags & PSR_Z_BIT ? 'Z' : 'z';
	buf[2] = flags & PSR_C_BIT ? 'C' : 'c';
	buf[3] = flags & PSR_V_BIT ? 'V' : 'v';
	buf[4] = '\0';

	printk("Flags: %s  IRQs o%s  FIQs o%s  Mode %s  ISA %s  Segment %s\n",
		buf, interrupts_enabled(regs) ? "n" : "ff",
		fast_interrupts_enabled(regs) ? "n" : "ff",
		processor_modes[processor_mode(regs)],
		isa_modes[isa_mode(regs)],
		get_fs() == get_ds() ? "kernel" : "user");
	show_extra_register_data(regs, 128);
}

 

//sysrq 会用到此函数
static void sysrq_handle_showregs(int key)
{
	struct pt_regs *regs = get_irq_regs();
	if (regs)
		show_regs(regs);
	perf_event_print_debug();
}