Snitches概述
Cassandra提供了Snitches功能,可以知道集群中的每个节点所属数据中心和机架。所有机架感应策略都实现了相同的接口IEndpointSnitch。先来看看Snitches的类图:
IEndpointSnitch接口中提供了比较实用的方法:
- //通过ip地址获取机架
- public String getRack(InetAddress endpoint);
- //通过ip地址获取数据中心
- public String getDatacenter(InetAddress endpoint);
- //按节点距离排序
- public List<InetAddress> getSortedListByProximity(InetAddress address, Collection<InetAddress> unsortedAddress);
- //比较节点与指定节点远近
- public int compareEndpoints(InetAddress target, InetAddress a1, InetAddress a2);
- //开如gossip协议
- public void gossiperStarting();
(1)SimpleSnitch:这种策略不能识别数据中心和机架信息,适合在单数据中心使用;
(2)NetworkTopologySnitch:这种策略提供了网络拓扑结构,以便更高效地消息路由;
(3)DynamicEndpointSnitch:这种策略可以记录节点之间通信时间间隔,记录节点之间通信速度,从而达到动态选择最合适节点的目的。
SimpleSnitch比较简单就不用介绍了,此类只是一个默认实现。下面主要介绍NetworkTopologySnitch和DynamicEndpointSnitch两种策略。
NetworkTopologySnitch
此策略提供了网络拓扑结构,因此可以知道节点之间的远近关系,该抽象类实现了compareEndpoints方法,代码如下:
- public int compareEndpoints(InetAddress address, InetAddress a1, InetAddress a2)
- {
- if (address.equals(a1) && !address.equals(a2))
- return -1;
- if (address.equals(a2) && !address.equals(a1))
- return 1;
- String addressDatacenter = getDatacenter(address);
- String a1Datacenter = getDatacenter(a1);
- String a2Datacenter = getDatacenter(a2);
- if (addressDatacenter.equals(a1Datacenter) && !addressDatacenter.equals(a2Datacenter))
- return -1;
- if (addressDatacenter.equals(a2Datacenter) && !addressDatacenter.equals(a1Datacenter))
- return 1;
- String addressRack = getRack(address);
- String a1Rack = getRack(a1);
- String a2Rack = getRack(a2);
- if (addressRack.equals(a1Rack) && !addressRack.equals(a2Rack))
- return -1;
- if (addressRack.equals(a2Rack) && !addressRack.equals(a1Rack))
- return 1;
- return 0;
- }
2、到这里表示3个节点ip均不相同,与1一样,比较数据中心,然后比较机架;
3、到这里表示同数据中心,同机架,返回0.
这里用到了两个方法:getDatacenter和getRack,不同的子类实现不同。AbstractNetworkTopologySnitch有四个子类实现:
PropertyFileSnitch
使用属性文件配置拓扑结构,该文件位于conf/cassandra-topology.properties中,配置类似
- # Data Center One
- 175.56.12.105=DC1:RAC1
- 175.50.13.200=DC1:RAC1
- 175.54.35.197=DC1:RAC1
- public String getDatacenter(InetAddress endpoint)
- {
- String[] info = getEndpointInfo(endpoint);
- assert info != null : "No location defined for endpoint " + endpoint;
- return info[0];
- }
- public String getRack(InetAddress endpoint)
- {
- String[] info = getEndpointInfo(endpoint);
- assert info != null : "No location defined for endpoint " + endpoint;
- return info[1];
- }
GossipingPropertyFileSnitch
通过属性文件(conf/cassandra-rackdc.properties)定义当前节点的数据中心和机架,并使用Gossip协议传播到其他节点,当cassandra-topology.properties文件存在的时候,cassandra-rackdc.properties只是做为一个备用。配置类似:
- dc =DC1
- rack =RAC1
该策略便于快速传播一个节点的变化,一般和PropertyFileSnitch配合使用。其获取数据中心的代码如下:
- public String getDatacenter(InetAddress endpoint)
- {
- if (endpoint.equals(FBUtilities.getBroadcastAddress()))
- return myDC;
- EndpointState epState = Gossiper.instance.getEndpointStateForEndpoint(endpoint);
- if (epState == null || epState.getApplicationState(ApplicationState.DC) == null)
- {
- if (psnitch == null)
- {
- if (savedEndpoints == null)
- savedEndpoints = SystemKeyspace.loadDcRackInfo();
- if (savedEndpoints.containsKey(endpoint))
- return savedEndpoints.get(endpoint).get("data_center");
- return DEFAULT_DC;
- }
- else
- return psnitch.getDatacenter(endpoint);
- }
- return epState.getApplicationState(ApplicationState.DC).value;
- }
2、不是本机的情况:如果接收到了Gossip消息,直接返回Gossip消息中的数据中心;否则返回本机conf/cassandra-topology.properties文件中的数据中心;
机架的获取与数据中心获取类似。
RackInferringSnitch
其实现与PropertyFileSnitch类似,根据ip地址确定数据中心和机架,如图所示:
第二个8位决定数据中心,第三个8位决定机架。
Ec2Snitch
主要使用在单区域数据中心,使用私有ip地址的情况。
DynamicEndpointSnitch
该策略通过监控两个节点的通信时间,来决定最佳选择方案,该策略是默认使用的,也是Cassandra推荐的。该策略和失败检测密切相关,Cassandra失败检测原理基于Hayashibara的一篇论文(http://ddg.jaist.ac.jp/pub/HDY+04.pdf).
参考资料:
源码下载地址git://git.apache.org/cassandra.git