[Linux]安装，配置Subversion 1.4.5

1. SVN 依赖的APR版本。

2. Linux下权限问题
* 在svn使用过程中牵扯到几种权限：文件系统的权限，linux系统权限，svn用户的权限，apache进程的权限；
* 文件系统的权限，linux系统权限：这里相同的意思，就是平时大家使用linux时文件夹和文件的访问权限；
* apache进程的权限：因为所有跟仓库传输的操作都是通过apache进程进行的，所以即使你给svn用户设置了很大的权限，但是apache进程没有访问仓库或者相关文件的权限也没有用。

软件环境

1. 版本
软件 版本 说明
Linux redhat 2.6.9-5.EL
APR APR-1.2.12 Apache可移植运行库
APR-util APR-util-1.2.12
Apache httpd-2.2.6.tar.gz
Subversion subversion-1.4.5.tar.gz
Subversion-deps subversion-deps-1.4.5.tar.gz svn编译时需要的程序

2. 下载
* Subversion相关软件下载：http://www.tigris.org/servlets/NewsItemView?newsItemID=1940
* Apache相关软件下载：http://httpd.apache.org/download.cgi

安装（完全按以下命令配置即可）
安装APR-1.2.12和APR-util-1.2.12

1.

# tar zxvf apr-1.2.12.tar.gz
# cd apr-1.2.12
# ./configure
# make
# make install

2.
# tar zxvf apr-util-1.2.12.tar.gz
# cd apr-util-1.2.12
# . /configure --with-apr=/usr/local/apr
# make
# make install

安装apache 2.2.6
1. 解包 httpd-2.2.6.tar.gz

# tar xzvf httpd-2.2.6.tar.gz
# cd httpd-2.2.6

2. 生成配置文件

# ./configure --prefix=/usr/local/apache2 --enable-dav --enable-modules=so --enable-maintainer-mode --enable-rewrite --with-apr=/usr/local/apr/bin/apr-1-config --with-apr-util=/usr/local/apr/bin/apu-1-config

3. 生成make文件，并安装

# make
# make install

4. 编辑配置文件httpd.conf

# vi /usr/local/apache2/conf/httpd.conf

修改内容：
ServerName www.example.com:80
ServerName localhost:80
保存退出

* apache的默认端口为80
* Svn的默认端口为3690
5. 启动Apache服务：

# /usr/local/apache2/bin/apachectl start

6. 浏览网站：
用浏览器查看http://localhost/,得到it works，说明apache已经配置成功了。

* 需要将linux的防火墙关闭，否则其他IP地址无法访问
* 关闭防火墙命令：service iptables stop
7. 停止Apache服务：

# /usr/local/apache2/bin/apachectl stop

8. 设置启动系统后，自启动Apache服务
编辑etc/rc.d/rc.local

# vi /etc/rc.d/rc.local

在最后加上一句：

/usr/local/apache2/bin/apachectl start

安装subversion

1. 解包

# tar xvzf subversion-1.4.5.tar.gz
# tar xvzf subversion-deps-1.4.5.tar.gz

2. 转入解包目录并生成配置文件

# cd subversion-1.4.5
# rm -rf apr
# rm -rf apr-util
#./configure --with-apxs=/usr/local/apache2/bin/apxs --prefix=/usr/local/subversion --with-apr=/usr/local/apr/bin/apr-1-config --with-apr-util=/usr/local/apr/bin/apu-1-config --with-ssl --with-zlib --enable-maintainer-mode

SVN 依赖的APR版本要正确。如果Apache为2.0.x，对应的APR版本应为0.9.x；Apache为2.2.x，对应的APR版本应为1.2.x。由于subversion-deps包里的APR是0.9.x的，因此编译svn时要删除从deps里解压出来的apr, apr-util，改而使用apache 2.2里提供的。（这里指定为开始安装的apr目录）
如果apache不是安装在默认路径，configure必須加上--with-apxs选项,如：./configure --with-apxs=/usr/local/apache2/bin/apxs

* configure可能存在的问题及解决方法
1. configure: error: could not find library containing RSA_new
o yum install openssl-devel
2. configure: error: no XML parser was found: expat or libxml 2.x required
o yum install expat-devel
3. configure: error: --with-zlib requires an argument.
o 去掉此选项。

* httpd: Syntax error on line 54 of /usr/local/apache2/conf/httpd.conf: Cannot load /usr/local/apache2/modules/mod_dav_svn.so into server: /usr/local/apache2/modules/mod_dav_svn.so: undefined symbol: dav_register_provider
o make sure you have your apache compiled with the dav options:

--enable-dav --enable-dav-fs --enable-dav-lock
3. 编译安装

# make
# make install

4. 查看subversion两个动态库有没有安装成功

# vi /usr/local/apache2/conf/httpd.conf

看到下面两个模块说明安装成功
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
5. 配置apache 支持svn

# vi /usr/local/apache2/conf/httpd.conf

在文件末尾加上


DAV svn
SVNParentPath /subversion/ (此处配置你的版本库根目录的父目录)
AuthType Basic
AuthName "Subversion repository" （此处字符串内容修改为提示对话框标题）
AuthUserFile /subversion/passwd (此处修改为访问版本库用户的文件，用apache 的 htpasswd命令生成)
AuthzSVNAccessFile /subversion/auth （此处修改为访问版本库权限的文件）
Require valid-user


6. 建立访问库用户文件

# /usr/local/apache2/bin/htpasswd -c /subversion/passwd dyf

第一次添加用户需先创建文件，所以有参数-c，以后添加用户可以不用添加参数）
按照提示输入密码

7. 建立访问库权限文件

# vi /subversion/auth

内容按照以下格式

[groups]
Tester=test,dyf
Developer=zb
[test:/]
@Tester = rw
dyf = rw
zb = r

8. 浏览器+权限 访问版本库
重起apache
在浏览器中输入http://servername/svn/test
输入拥有访问权限的用户名，密码登陆。

1. error info:

Could not open the requested SVN filesystem


* Make sure SVNParentPath correct.
客户端无法提交文件

Can't open file "/opt/subversion/AT2/db/txn-current-lock" Permission denied
增加权限：chmod -R o+rw /opt/subversion/
注意

* 要通过apache来访问svn，需要：
1. 关闭httpd服务:service httpd stop
2. 启用apache服务:/usr/local/apache2/bin/apachectl start

安装之后httpd.conf配置文件
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/etc/svn/apache2" will be interpreted by the
# server as "/etc/svn/apache2/logs/foo.log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
[color=blue]ServerRoot "/etc/svn/apache2"[/color]

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
[color=blue]Listen 8001[/color]

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
[color=blue]LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so[/color]
#

<IfModule !mpm_netware_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/etc/svn/apache2/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/etc/svn/apache2/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/access_log common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access_log combined
</IfModule>

<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/etc/svn/apache2/cgi-bin/"

</IfModule>

<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>

#
# "/etc/svn/apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/etc/svn/apache2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

[color=blue]<Location /svn>
DAV svn
SVNParentPath /subversion/project
AuthType Basic
AuthName "Subversion repository"
AuthUserFile /subversion/passwd
#AuthzSVNAccessFile /subversion/auth
Require valid-user
</Location>[/color]

测试apache2 存放位置：/etc/svn/apache2