PPP实验

 

首先更改设备名称以免混淆 

[Huawei]sysname AR1

[Huawei]sysname AR2
[Huawei]sysname AR3

 配置聚合链路并配上接口ip

[AR1]int Serial 3/0/0
[AR1-Serial3/0/0]ip add 192.168.1.1 24

[AR2]int s3/0/0
[AR2-Serial3/0/0]ppp mp Mp-group 0/0/0

[AR2-Serial3/0/0]int s4/0/0
[AR2-Serial4/0/0]ppp mp Mp-group 0/0/0

[AR2-Serial4/0/0]int Mp-group 0/0/0
[AR2-Mp-group0/0/0]ip add 192.168.2.2 24

[AR3]int Mp-group 0/0/0
[AR3-Mp-group0/0/0]ip add 192.168.2.3 24

[AR3-Mp-group0/0/0]int s3/0/0
[AR3-Serial3/0/0]ppp mp Mp-group 0/0/0
[AR3-Serial3/0/0]int s3/0/1
[AR3-Serial3/0/1]ppp mp Mp-group 0/0/0

在aaa下创建用户并配置chap 

[AR2]aaa

[AR2-aaa]local-user abc password cipher 123
[AR2-aaa]local-user abc service-type ppp

[AR2-aaa]int s3/0/0

[AR2-Serial3/0/0]ppp authentication-mode chap

[AR1]int s3/0/0
[AR1-Serial3/0/0]ppp chap user abc
[AR1-Serial3/0/0]ppp chap password cipher 123

测试一下能否ping通 

 

双向也就是在两个设备上重复同样的操作 

[AR3]aaa
[AR3-aaa]local-user abc password cipher 123 
[AR3-aaa]local-user abc service-type ppp
[AR3-aaa]int s3/0/0
[AR3-Serial3/0/0]ppp authentication-mode chap
[AR3-Serial3/0/0]int s3/0/1
[AR3-Serial3/0/1]ppp authentication-mode chap
[AR2]int s3/0/1  
[AR2-Serial3/0/1]ppp chap user abc
[AR2-Serial3/0/1]ppp chap password cipher 123
[AR2-Serial3/0/1]int s4/0/0
[AR2-Serial4/0/0]ppp chap user abc
[AR2-Serial4/0/0]ppp chap password cipher 123

测试一下能否ping通 

  

应为我在AR2上已经有一个用户就没有创建新用户了 

[AR2]int s3/0/1 
[AR2-Serial3/0/1]ppp authentication-mode chap
[AR2-Serial3/0/1]int s4/0/0 
[AR2-Serial4/0/0]ppp authentication-mode chap

[AR3]int s3/0/0
[AR3-Serial3/0/0]ppp chap user abc
[AR3-Serial3/0/0]ppp chap password cipher 123
[AR3-Serial3/0/0]int s3/0/1
[AR3-Serial3/0/1]ppp chap user abc
[AR3-Serial3/0/1]ppp chap password cipher 123

重启一下接口因为刚刚两台路由器已经协商过一次所以就算更改密码也能ping通 

[AR3-Serial3/0/1]shutdown

[AR3-Serial3/0/1]undo shutdown

[AR3-Serial3/0/1]int s3/0/0
[AR3-Serial3/0/0] shutdown
[AR3-Serial3/0/0]undo shutdown

 测试一下能否ping通