解决 Warning - bad CRC, using default environment警告

最新推荐文章于 2022-06-22 19:47:23 发布

loveshipting

最新推荐文章于 2022-06-22 19:47:23 发布

阅读量8k

点赞数 2

分类专栏： linux

本文链接：https://blog.csdn.net/loveshipting/article/details/106005875

版权

linux 专栏收录该内容

11 篇文章 2 订阅

订阅专栏

接上一篇文章，当编译下载后出现如下警告，如何消除？

在这里插入图片描述

=> env default -a
## Resetting to default environment

=> saveenv 
Saving Environment to MMC...
Writing to MMC(0)... done

重启，警告消失

U-Boot 2016.03 (May 08 2020 - 20:19:49 +0800)

CPU:   Freescale i.MX6ULL rev1.1 69 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 53C
Reset cause: POR
Board: MX6ULL 14x14 EVK
I2C:   ready
DRAM:  512 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Display: TFT43AB (480x272)
Video: 480x272x24
In:    serial
Out:   serial
Err:   serial
switch to partitions #0, OK
mmc0 is current device
Net:   Board Net Initialization Failed
No ethernet found.
Normal Boot
Hit any key to stop autoboot:  0