什么是CBRS
CBRS是Citizens Broadband Radio Service的缩写。
2015年美国联邦通讯委员会(FCC)批准了CBRS(公民宽带无线电服务）的频谱。
CBRS频谱的带宽是150MHz
CBRS频谱的范围是3550到3700MHz， 频率分配跨越现有的LTE频段42（3400兆赫到3600兆赫）和LTE频段43（3600兆赫到3800兆赫）。
CBRS的频段是Band 48，TD-LTE制式，支持语音、短信、数据服务
该频谱作为共享频谱被美国政府和其他商业机构和社团实体共享使用。
CBRS采用三层频谱共享框架设计。最上面是现任访问层，后面是优先级访问层。最后一层是一般授权访问，包括可供一般使用的其余频谱。
CBRS克服了WiFi的局限性，为大型商业企业提供了更高效的选择。WiFi覆盖范围和容量有限。CBRS为商业企业提供两倍的容量和四倍的WiFi范围。
CBRS联盟
CBRS联盟由120个成员公司组成。CBRS联盟认为，CBRS频段的基于LTE的解决方案，利用共享频谱，可以实现建筑和室外覆盖以及大规模扩容。为了最大限度地发挥CBRS的全部潜力，CBRS联盟旨在建立一个强大的生态系统，以提供基于LTE的CBRS解决方案。CBRS联盟的任务是宣传基于LTE的CBRS技术、用例和业务机会，同时推动完成任务所需的技术发展，包括多运营商LTE能力。联盟还将为美国3.5GHz频段的LTE设备建立有效的产品认证计划，确保多供应商的互操作性。
CBRS的频谱共享分配方式
与公网运营商频段相比CBRS不同的是频谱分配给每个用户的方式。CBRS不是在大范围内把频谱卖给广域覆盖的运营商，也不像WiFi那样完全公开免费试用频段。相反，每栋建筑内的使用都是根据具体情况单独要求和分配的。如果不再需要，则返回给他人使用。
分配频谱的过程是自动化的，有几个频谱分配服务器（SAS）在全国范围内协调该方案。作为注册请求的一部分，每个小单元报告其水平位置在50米以内，垂直位置在3米以内。SAS使用地形数据和无线电传播模型来计算对附近其他小单元的影响。额外的室外无线电测量接收器（环境传感器）也用于评估背景水平。如果射频功率密度小于-80dBm（1x10-11瓦），则SAS授权频谱使用。
其理念是，频谱是一项宝贵的国家资产，应加以利用，而不是休眠。
CBRS模组
目前市面上已经有一些支持CBRS的模组和产品。这里我们采用一款模组开发板进行测试。
CBRS基站模拟器
由于CBRS的频段比较特殊，这里我们采用微戎WR100作为CBRS基站模拟器配合测试。
传导测试
将CBRS模组的天线口直接通过功分器和射频线连接到WR100上。通过微戎测试系统配置界面，设置为TDD的Band 48，在测试单板上插入测试SIM卡，即可以开始测试。在终端单板的串口上输入AT+CFUN=1，可以看到终端成功接入网络，获取到IP，并且可以ping通和访问公网。
OTA测试
将CBRS模组的天线口连接上3.5GHz的天线。WR100基站模拟器也连接上3.5GHz的天线。通过微戎测试系统配置界面，设置为TDD的Band 48，在测试单板上插入测试SIM卡，即可以开始测试。在终端单板的串口上输入AT+CFUN=1，可以看到终端成功接入网络，获取到IP，并且可以ping通和访问公网。
我们进一步测试通过CBRS模组接入的网络ping百度的IP，ICMP返回OK
信令分析
采用微戎WR100的信令分析工具抓取入网时候的信令消息。
解析MIB消息可以看到带宽是10MHz，PHICH的配置，以及SFN
BCCH-BCH-Message
message
dl-Bandwidth: n50 (3)
phich-Config
phich-Duration: normal (0)
phich-Resource: one (2)
systemFrameNumber: 50 [bit length 8, 0101 0000 decimal value 80]
schedulingInfoSIB1-BR-r13: SystemInformationBlockType1-BR is not scheduled (0)
...0 .... systemInfoUnchanged-BR-r15: False
spare: 00 [bit length 4, 4 LSB pad bits, 0000 .... decimal value 0]
解析SIB1消息后可以看到SIB1里带的频段信息是band 48: freqBandIndicator: 48，MCC/MNC是001/01，Cellid，trackingAreaCode以及TDD的子帧配比
BCCH-DL-SCH-Message
message: c1 (0)
c1: systemInformationBlockType1 (1)
systemInformationBlockType1
cellAccessRelatedInfo
plmn-IdentityList: 1 item
Item 0
PLMN-IdentityInfo
plmn-Identity
mcc: 3 items
Item 0
MCC-MNC-Digit: 0
Item 1
MCC-MNC-Digit: 0
Item 2
MCC-MNC-Digit: 1
mnc: 2 items
Item 0
MCC-MNC-Digit: 0
Item 1
MCC-MNC-Digit: 1
cellReservedForOperatorUse: notReserved (1)
trackingAreaCode: 0001 [bit length 16, 0000 0000 0000 0001 decimal value 1]
cellIdentity: 1a2d0010 [bit length 28, 4 LSB pad bits, 0001 1010 0010 1101 0000 0000 0001 .... decimal value 27447297]
cellBarred: notBarred (1)
intraFreqReselection: allowed (0)
.... ..0. csg-Indication: False
cellSelectionInfo
q-RxLevMin: -140dBm (-70)
p-Max: 10dBm
freqBandIndicator: 48
schedulingInfoList: 1 item
Item 0
SchedulingInfo
si-Periodicity: rf16 (1)
sib-MappingInfo: 1 item
Item 0
SIB-Type: sibType3 (0)
tdd-Config
subframeAssignment: sa2 (2)
specialSubframePatterns: ssp7 (7)
si-WindowLength: ms40 (6)
systemInfoValueTag: 0
nonCriticalExtension
nonCriticalExtension
nonCriticalExtension
nonCriticalExtension
cellAccessRelatedInfo-v1250
nonCriticalExtension
hyperSFN-r13: 4e80 [bit length 10, 6 LSB pad bits, 0100 1110 10.. .... decimal value 314]
eDRX-Allowed-r13: true (0)
解析SIB23可以看到上行的信道配置信息，RACH配置信息，上行功控信息，测量重选信息
message: c1 (0)
c1: systemInformation (0)
systemInformation
criticalExtensions: systemInformation-r8 (0)
systemInformation-r8
sib-TypeAndInfo: 2 items
Item 0
sib-TypeAndInfo item: sib2 (0)
sib2
radioResourceConfigCommon
rach-ConfigCommon
preambleInfo
numberOfRA-Preambles: n52 (12)
powerRampingParameters
powerRampingStep: dB2 (1)
preambleInitialReceivedTargetPower: dBm-104 (8)
ra-SupervisionInfo
preambleTransMax: n10 (6)
ra-ResponseWindowSize: sf10 (7)
mac-ContentionResolutionTimer: sf40 (4)
maxHARQ-Msg3Tx: 5
bcch-Config
modificationPeriodCoeff: n4 (1)
pcch-Config
defaultPagingCycle: rf128 (2)
nB: oneT (2)
prach-Config
rootSequenceIndex: 204
prach-ConfigInfo
prach-ConfigIndex: 4
..0. .... highSpeedFlag: False
zeroCorrelationZoneConfig: 11
prach-FreqOffset: 6
pdsch-ConfigCommon
referenceSignalPower: -3dBm
p-b: 0
pusch-ConfigCommon
pusch-ConfigBasic
n-SB: 1
hoppingMode: interSubFrame (0)
pusch-HoppingOffset: 6
.0.. .... enable64QAM: False
ul-ReferenceSignalsPUSCH
..0. .... groupHoppingEnabled: False
groupAssignmentPUSCH: 0
0... .... sequenceHoppingEnabled: False
cyclicShift: 0
pucch-ConfigCommon
deltaPUCCH-Shift: ds2 (1)
nRB-CQI: 1
nCS-AN: 0
n1PUCCH-AN: 11
soundingRS-UL-ConfigCommon: setup (1)
setup
srs-BandwidthConfig: bw2 (2)
srs-SubframeConfig: sc3 (3)
.... 1... ackNackSRS-SimultaneousTransmission: True
uplinkPowerControlCommon
p0-NominalPUSCH: -85dBm
alpha: al07 (4)
p0-NominalPUCCH: -117dBm
deltaFList-PUCCH
deltaF-PUCCH-Format1: deltaF0 (1)
deltaF-PUCCH-Format1b: deltaF3 (1)
deltaF-PUCCH-Format2: deltaF1 (2)
deltaF-PUCCH-Format2a: deltaF2 (2)
deltaF-PUCCH-Format2b: deltaF2 (2)
deltaPreambleMsg3: 8dB (4)
ul-CyclicPrefixLength: len1 (0)
ue-TimersAndConstants
t300: ms200 (1)
t301: ms200 (1)
t310: ms200 (3)
n310: n6 (4)
t311: ms10000 (3)
n311: n5 (4)
freqInfo
additionalSpectrumEmission: 1
timeAlignmentTimerCommon: infinity (7)
Item 1
sib-TypeAndInfo item: sib3 (1)
sib3
cellReselectionInfoCommon
q-Hyst: dB2 (2)
cellReselectionServingFreqInfo
s-NonIntraSearch: 6dB (3)
threshServingLow: 4dB (2)
cellReselectionPriority: 6
intraFreqCellReselectionInfo
q-RxLevMin: -122dBm (-61)
p-Max: 23dBm
s-IntraSearch: 10dB (5)
.... ..1. presenceAntennaPort1: True
neighCellConfig: No MBSFN subframes are present in all neighbour cells (1)
t-ReselectionEUTRA: 1s
终端发起NAS Attach
Non-Access-Stratum (NAS)PDU
0001 .... = Security header type: Integrity protected (1)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
Message authentication code: 0x00000000
Sequence number: 4
0000 .... = Security header type: Plain NAS message, not security protected (0)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
NAS EPS Mobility Management Message Type: Attach request (0x41)
0... .... = Type of security context flag (TSC): Native security context (for KSIasme)
.000 .... = NAS key set identifier: (0)
.... 0... = Spare bit(s): 0x00
.... .001 = EPS attach type: EPS attach (1)
EPS mobile identity
Length: 11
.... 0... = Odd/even indication: Even number of identity digits
.... .110 = Type of identity: GUTI (6)
Mobile Country Code (MCC): Unknown (1)
Mobile Network Code (MNC): Unknown (01)
MME Group ID: 32769
MME Code: 1
M-TMSI: 0xaa057ccb
UE network capability
Length: 5
1... .... = EEA0: Supported
.1.. .... = 128-EEA1: Supported
..1. .... = 128-EEA2: Supported
...0 .... = 128-EEA3: Not supported
.... 0... = EEA4: Not supported
.... .0.. = EEA5: Not supported
.... ..0. = EEA6: Not supported
.... ...0 = EEA7: Not supported
1... .... = EIA0: Supported
.1.. .... = 128-EIA1: Supported
..1. .... = 128-EIA2: Supported
...0 .... = 128-EIA3: Not supported
.... 0... = EIA4: Not supported
.... .0.. = EIA5: Not supported
.... ..0. = EIA6: Not supported
.... ...0 = EIA7: Not supported
0... .... = UEA0: Not supported
.0.. .... = UEA1: Not supported
..0. .... = UEA2: Not supported
...0 .... = UEA3: Not supported
.... 0... = UEA4: Not supported
.... .0.. = UEA5: Not supported
.... ..0. = UEA6: Not supported
.... ...0 = UEA7: Not supported
0... .... = UCS2 support (UCS2): The UE has a preference for the default alphabet
.0.. .... = UMTS integrity algorithm UIA1: Not supported
..0. .... = UMTS integrity algorithm UIA2: Not supported
...0 .... = UMTS integrity algorithm UIA3: Not supported
.... 0... = UMTS integrity algorithm UIA4: Not supported
.... .0.. = UMTS integrity algorithm UIA5: Not supported
.... ..0. = UMTS integrity algorithm UIA6: Not supported
.... ...0 = UMTS integrity algorithm UIA7: Not supported
0... .... = ProSe direct discovery: Not supported
.0.. .... = ProSe: Not supported
..0. .... = H.245 After SRVCC Handover: Not supported
...0 .... = Access class control for CSFB: Not supported
.... 0... = LTE Positioning Protocol: Not supported
.... .0.. = Location services (LCS) notification mechanisms: Not supported
.... ..0. = SRVCC from E-UTRAN to cdma2000 1xCS: Not supported
.... ...0 = Notification procedure: Not supported
ESM message container
Length: 36
ESM message container contents: 0203d011271d808021100100001081060000000083060000…
0000 .... = EPS bearer identity: No EPS bearer identity assigned (0)
.... 0010 = Protocol discriminator: EPS session management messages (0x2)
Procedure transaction identity: 3
NAS EPS session management messages: PDN connectivity request (0xd0)
0001 .... = PDN type: IPv4 (1)
.... 0001 = Request type: Initial request (1)
Protocol Configuration Options
Element ID: 0x27
Length: 29
[Link direction: MS to network (0)]
1... .... = Extension: True
.... .000 = Configuration Protocol: PPP for use with IP PDP type or IP PDN type (0)
Protocol or Container ID: Internet Protocol Control Protocol (0x8021)
Length: 0x10 (16)
PPP IP Control Protocol
Code: Configuration Request (1)
Identifier: 0 (0x00)
Length: 16
Options: (12 bytes), Primary DNS Server IP Address, Secondary DNS Server IP Address
Primary DNS Server IP Address
Type: Primary DNS Server IP Address (129)
Length: 6
Primary DNS Address: 0.0.0.0
Secondary DNS Server IP Address
Type: Secondary DNS Server IP Address (131)
Length: 6
Secondary DNS Address: 0.0.0.0
Protocol or Container ID: IP address allocation via NAS signalling (0x000a)
Length: 0x00 (0)
Protocol or Container ID: DNS Server IPv4 Address Request (0x000d)
Length: 0x00 (0)
Protocol or Container ID: IPv4 Link MTU Request (0x0010)
Length: 0x00 (0)
Device properties
1100 .... = Element ID: 0xc-
.... 000. = Spare bit(s): 0
.... ...0 = Low priority: MS is not configured for NAS signalling low priority
Tracking area identity - Last visited registered TAI
Element ID: 0x52
Mobile Country Code (MCC): Unknown (1)
Mobile Network Code (MNC): Unknown (01)
Tracking area code(TAC): 1
Device properties
1101 .... = Element ID: 0xd-
.... 000. = Spare bit(s): 0
.... ...0 = Low priority: MS is not configured for NAS signalling low priority
GUTI type - Old GUTI type
1110 .... = Element ID: 0xe-
.... 000. = Spare bit(s): 0x00
.... ...0 = GUTI type: Native GUTI
MS network feature support
1100 .... = Element ID: 0xc-
.... 000. = Spare bit(s): 0
.... ...1 = Extended periodic timers: MS supports the extended periodic timer in this domain
RRC Connection Request
message: c1 (0)
c1: rrcConnectionRequest (1)
rrcConnectionRequest
criticalExtensions: rrcConnectionRequest-r8 (0)
rrcConnectionRequest-r8
ue-Identity: randomValue (1)
randomValue: c72a812e45 [bit length 40, 1100 0111 0010 1010 1000 0001 0010 1110 0100 0101 decimal value 855411600965]
establishmentCause: mo-Signalling (3)
spare: 00 [bit length 1, 7 LSB pad bits, 0... .... decimal value 0]
收到了微戎WR100发回来的RRC Connection Setup
DL-CCCH-Message
message: c1 (0)
c1: rrcConnectionSetup (3)
rrcConnectionSetup
rrc-TransactionIdentifier: 0
criticalExtensions: c1 (0)
c1: rrcConnectionSetup-r8 (0)
rrcConnectionSetup-r8
radioResourceConfigDedicated
srb-ToAddModList: 1 item
Item 0
SRB-ToAddMod
srb-Identity: 1
rlc-Config: explicitValue (0)
explicitValue: am (0)
am
ul-AM-RLC
t-PollRetransmit: ms60 (11)
pollPDU: pInfinity (7)
pollByte: kBinfinity (14)
maxRetxThreshold: t32 (7)
dl-AM-RLC
t-Reordering: ms45 (9)
t-StatusProhibit: ms0 (0)
logicalChannelConfig: defaultValue (1)
defaultValue: NULL
mac-MainConfig: explicitValue (0)
explicitValue
ul-SCH-Config
maxHARQ-Tx: n5 (4)
periodicBSR-Timer: sf20 (3)
retxBSR-Timer: sf320 (0)
0... .... ttiBundling: False
drx-Config: release (0)
release: NULL
timeAlignmentTimerDedicated: infinity (7)
phr-Config: setup (1)
setup
periodicPHR-Timer: sf500 (5)
prohibitPHR-Timer: sf200 (5)
dl-PathlossChange: dB3 (1)
physicalConfigDedicated
pdsch-ConfigDedicated
p-a: dB0 (4)
pucch-ConfigDedicated
ackNackRepetition: release (0)
release: NULL
tdd-AckNackFeedbackMode: multiplexing (1)
pusch-ConfigDedicated
betaOffset-ACK-Index: 9
betaOffset-RI-Index: 6
betaOffset-CQI-Index: 6
uplinkPowerControlDedicated
p0-UE-PUSCH: 0dB
deltaMCS-Enabled: en0 (0)
.1.. .... accumulationEnabled: True
p0-UE-PUCCH: 0dB
pSRS-Offset: 3
cqi-ReportConfig
nomPDSCH-RS-EPRE-Offset: 0dB (0)
cqi-ReportPeriodic: setup (1)
setup
cqi-PUCCH-ResourceIndex: 0
cqi-pmi-ConfigIndex: 68
cqi-FormatIndicatorPeriodic: widebandCQI (0)
widebandCQI: NULL
.... ...0 simultaneousAckNackAndCQI: False
soundingRS-UL-ConfigDedicated: setup (1)
setup
srs-Bandwidth: bw2 (2)
srs-HoppingBandwidth: hbw0 (0)
freqDomainPosition: 0
..1. .... = duration: indefinite
srs-ConfigIndex: 45
transmissionComb: 0
cyclicShift: cs0 (0)
schedulingRequestConfig: setup (1)
setup
sr-PUCCH-ResourceIndex: 0
sr-ConfigIndex: 17
[Periodicity: 20]
[Subframe Offset: 2]
dsr-TransMax: n64 (4)
CBRS终端上发RRC Connection Setup Complete
message: c1 (0)
c1: rrcConnectionSetupComplete (4)
rrcConnectionSetupComplete
rrc-TransactionIdentifier: 0
criticalExtensions: c1 (0)
c1: rrcConnectionSetupComplete-r8 (0)
rrcConnectionSetupComplete-r8
selectedPLMN-Identity: 1
registeredMME
mmegi: 8001 [bit length 16, 1000 0000 0000 0001 decimal value 32769]
mmec: 01 [bit length 8, 0000 0001 decimal value 1]
dedicatedInfoNAS: 175c4bb3fe040741010bf600f110800101aa057ccb05e0e0…
Non-Access-Stratum (NAS)PDU
0001 .... = Security header type: Integrity protected (1)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
Message authentication code: 0x5c4bb3fe
Sequence number: 4
0000 .... = Security header type: Plain NAS message, not security protected (0)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
NAS EPS Mobility Management Message Type: Attach request (0x41)
0... .... = Type of security context flag (TSC): Native security context (for KSIasme)
.000 .... = NAS key set identifier: (0)
.... 0... = Spare bit(s): 0x00
.... .001 = EPS attach type: EPS attach (1)
EPS mobile identity
Length: 11
.... 0... = Odd/even indication: Even number of identity digits
.... .110 = Type of identity: GUTI (6)
Mobile Country Code (MCC): Unknown (1)
Mobile Network Code (MNC): Unknown (01)
MME Group ID: 32769
MME Code: 1
M-TMSI: 0xaa057ccb
UE network capability
Length: 5
1... .... = EEA0: Supported
.1.. .... = 128-EEA1: Supported
..1. .... = 128-EEA2: Supported
...0 .... = 128-EEA3: Not supported
.... 0... = EEA4: Not supported
.... .0.. = EEA5: Not supported
.... ..0. = EEA6: Not supported
.... ...0 = EEA7: Not supported
1... .... = EIA0: Supported
.1.. .... = 128-EIA1: Supported
..1. .... = 128-EIA2: Supported
...0 .... = 128-EIA3: Not supported
.... 0... = EIA4: Not supported
.... .0.. = EIA5: Not supported
.... ..0. = EIA6: Not supported
.... ...0 = EIA7: Not supported
0... .... = UEA0: Not supported
.0.. .... = UEA1: Not supported
..0. .... = UEA2: Not supported
...0 .... = UEA3: Not supported
.... 0... = UEA4: Not supported
.... .0.. = UEA5: Not supported
.... ..0. = UEA6: Not supported
.... ...0 = UEA7: Not supported
0... .... = UCS2 support (UCS2): The UE has a preference for the default alphabet
.0.. .... = UMTS integrity algorithm UIA1: Not supported
..0. .... = UMTS integrity algorithm UIA2: Not supported
...0 .... = UMTS integrity algorithm UIA3: Not supported
.... 0... = UMTS integrity algorithm UIA4: Not supported
.... .0.. = UMTS integrity algorithm UIA5: Not supported
.... ..0. = UMTS integrity algorithm UIA6: Not supported
.... ...0 = UMTS integrity algorithm UIA7: Not supported
0... .... = ProSe direct discovery: Not supported
.0.. .... = ProSe: Not supported
..0. .... = H.245 After SRVCC Handover: Not supported
...0 .... = Access class control for CSFB: Not supported
.... 0... = LTE Positioning Protocol: Not supported
.... .0.. = Location services (LCS) notification mechanisms: Not supported
.... ..0. = SRVCC from E-UTRAN to cdma2000 1xCS: Not supported
.... ...0 = Notification procedure: Not supported
ESM message container
Length: 36
ESM message container contents: 0203d011271d808021100100001081060000000083060000…
0000 .... = EPS bearer identity: No EPS bearer identity assigned (0)
.... 0010 = Protocol discriminator: EPS session management messages (0x2)
Procedure transaction identity: 3
NAS EPS session management messages: PDN connectivity request (0xd0)
0001 .... = PDN type: IPv4 (1)
.... 0001 = Request type: Initial request (1)
Protocol Configuration Options
Element ID: 0x27
Length: 29
[Link direction: MS to network (0)]
1... .... = Extension: True
.... .000 = Configuration Protocol: PPP for use with IP PDP type or IP PDN type (0)
Protocol or Container ID: Internet Protocol Control Protocol (0x8021)
Length: 0x10 (16)
PPP IP Control Protocol
Code: Configuration Request (1)
Identifier: 0 (0x00)
Length: 16
Options: (12 bytes), Primary DNS Server IP Address, Secondary DNS Server IP Address
Primary DNS Server IP Address
Type: Primary DNS Server IP Address (129)
Length: 6
Primary DNS Address: 0.0.0.0
Secondary DNS Server IP Address
Type: Secondary DNS Server IP Address (131)
Length: 6
Secondary DNS Address: 0.0.0.0
Protocol or Container ID: IP address allocation via NAS signalling (0x000a)
Length: 0x00 (0)
Protocol or Container ID: DNS Server IPv4 Address Request (0x000d)
Length: 0x00 (0)
Protocol or Container ID: IPv4 Link MTU Request (0x0010)
Length: 0x00 (0)
Device properties
1100 .... = Element ID: 0xc-
.... 000. = Spare bit(s): 0
.... ...0 = Low priority: MS is not configured for NAS signalling low priority
Tracking area identity - Last visited registered TAI
Element ID: 0x52
Mobile Country Code (MCC): Unknown (1)
Mobile Network Code (MNC): Unknown (01)
Tracking area code(TAC): 1
Device properties
1101 .... = Element ID: 0xd-
.... 000. = Spare bit(s): 0
.... ...0 = Low priority: MS is not configured for NAS signalling low priority
GUTI type - Old GUTI type
1110 .... = Element ID: 0xe-
.... 000. = Spare bit(s): 0x00
.... ...0 = GUTI type: Native GUTI
MS network feature support
1100 .... = Element ID: 0xc-
.... 000. = Spare bit(s): 0
.... ...1 = Extended periodic timers: MS supports the extended periodic timer in this domain
nonCriticalExtension
nonCriticalExtension
gummei-Type-r10: native (0)
微戎WR100发起认证流程，下发Security Mode Command
message: c1 (0)
c1: securityModeCommand (6)
securityModeCommand
rrc-TransactionIdentifier: 0
criticalExtensions: c1 (0)
c1: securityModeCommand-r8 (0)
securityModeCommand-r8
securityConfigSMC
securityAlgorithmConfig
cipheringAlgorithm: eea0 (0)
integrityProtAlgorithm: eia2 (2)
CBRS终端回复Security Mode Complete
message: c1 (0)
c1: securityModeComplete (5)
securityModeComplete
rrc-TransactionIdentifier: 0
criticalExtensions: securityModeComplete-r8 (0)
securityModeComplete-r8
下一步进入能力协商，微戎WR100下发UE Capability Enquiry
message: c1 (0)
c1: ueCapabilityEnquiry (7)
ueCapabilityEnquiry
rrc-TransactionIdentifier: 0
criticalExtensions: c1 (0)
c1: ueCapabilityEnquiry-r8 (0)
ueCapabilityEnquiry-r8
ue-CapabilityRequest: 1 item
Item 0
RAT-Type: eutra (0)
CBRS终端回复能力集Capability消息
UE-EUTRA-Capability
accessStratumRelease: rel10 (2)
ue-Category: 4
pdcp-Parameters
supportedROHC-Profiles
...1 .... profile0x0001-r15: True
.... 1... profile0x0002-r15: True
.... .1.. profile0x0003-r15: True
.... ..1. profile0x0004-r15: True
.... ...0 profile0x0006-r15: False
0... .... profile0x0101-r15: False
.0.. .... profile0x0102-r15: False
..0. .... profile0x0103-r15: False
...0 .... profile0x0104-r15: False
maxNumberROHC-ContextSessions: cs4 (1)
phyLayerParameters
0... .... ue-TxAntennaSelectionSupported: False
.0.. .... ue-SpecificRefSigsSupported: False
rf-Parameters
supportedBandListEUTRA: 3 items
Item 0
SupportedBandEUTRA
bandEUTRA: 48
.... ..0. halfDuplex: False
Item 1
SupportedBandEUTRA
bandEUTRA: 43
.... .0.. halfDuplex: False
Item 2
SupportedBandEUTRA
bandEUTRA: 42
.... 0... halfDuplex: False
measParameters
bandListEUTRA: 3 items
Item 0
BandInfoEUTRA
interFreqBandList: 3 items
Item 0
InterFreqBandInfo
..1. .... interFreqNeedForGaps: True
[bandEUTRA: 48 -> band 48]
Item 1
InterFreqBandInfo
...1 .... interFreqNeedForGaps: True
[bandEUTRA: 48 -> band 43]
Item 2
InterFreqBandInfo
.... 1... interFreqNeedForGaps: True
[bandEUTRA: 48 -> band 42]
Item 1
BandInfoEUTRA
interFreqBandList: 3 items
Item 0
InterFreqBandInfo
.... 1... interFreqNeedForGaps: True
[bandEUTRA: 43 -> band 48]
Item 1
InterFreqBandInfo
.... .1.. interFreqNeedForGaps: True
[bandEUTRA: 43 -> band 43]
Item 2
InterFreqBandInfo
.... ..1. interFreqNeedForGaps: True
[bandEUTRA: 43 -> band 42]
Item 2
BandInfoEUTRA
interFreqBandList: 3 items
Item 0
InterFreqBandInfo
.... ..1. interFreqNeedForGaps: True
[bandEUTRA: 42 -> band 48]
Item 1
InterFreqBandInfo
.... ...1 interFreqNeedForGaps: True
[bandEUTRA: 42 -> band 43]
Item 2
InterFreqBandInfo
1... .... interFreqNeedForGaps: True
[bandEUTRA: 42 -> band 42]
featureGroupIndicators: fe0dd89a [bit length 32, 1111 1110 0000 1101 1101 1000 1001 1010 decimal value 4262320282]
1... .... = Indicator 1: Intra-subframe freq hopping for PUSCH scheduled by UL grant; DCI format 3a; Aperiodic CQI/PMI/RI report on PUSCH: Mode 2-0 & 2-2 - Supported
.1.. .... = Indicator 2: Simultaneous CQI & ACK/NACK on PUCCH (format 2a/2b); Absolute TPC command for PUSCH; Resource alloc type 1 for PDSCH; Periodic CQI/PMI/RI report on PUCCH: Mode 2-0 & 2-1 - Supported
..1. .... = Indicator 3: 5bit RLC UM SN; 7bit PDCP SN - Supported
...1 .... = Indicator 4: Short DRX cycle - Supported
.... 1... = Indicator 5: Long DRX cycle; DRX command MAC control element - Supported
.... .1.. = Indicator 6: Prioritised bit rate - Supported
.... ..1. = Indicator 7: RLC UM - Supported
.... ...0 = Indicator 8: EUTRA RRC_CONNECTED to UTRA CELL_DCH PS handover - Not supported
0... .... = Indicator 9: EUTRA RRC_CONNECTED to GERAN GSM_Dedicated handover - Not Supported
.0.. .... = Indicator 10: EUTRA RRC_CONNECTED to GERAN (Packet_) Idle by Cell Change Order; EUTRA RRC_CONNECTED to GERAN (Packet_) Idle by Cell Change Order with NACC - Not supported
..0. .... = Indicator 11: EUTRA RRC_CONNECTED to CDMA2000 1xRTT CS Active handover - Not supported
...0 .... = Indicator 12: EUTRA RRC_CONNECTED to CDMA2000 HRPD Active handover - Not supported
.... 1... = Indicator 13: Inter-frequency handover (within FDD or TDD) - Supported
.... .1.. = Indicator 14: Measurement reporting event: Event A4 - Neighbour > threshold; Measurement reporting event: Event A5 - Serving < threshold1 &Neighbour > threshold2 - Supported
.... ..0. = Indicator 15: Measurement reporting event: Event B1 - Neighbour > threshold - Not supported
.... ...1 = Indicator 16: non-ANR related periodical measurement reporting - Supported
1... .... = Indicator 17: ANR related intra-frequency measurement reporting events - Supported
.1.. .... = Indicator 18: ANR related inter-frequency measurement reporting events - Supported
..0. .... = Indicator 19: ANR related inter-RAT measurement reporting events - Not supported
...1 .... = Indicator 20: SRB1 and SRB2 for DCCH + 8x AM DRB; SRB1 and SRB2 for DCCH + 5x AM DRB + 3x UM DRB (if indicator 7 is supported) - Supported
.... 1... = Indicator 21: Predefined intra- and inter-subframe frequency hopping for PUSCH with N_sb > 1; Predefined inter-subframe frequency hopping for PUSCH with N_sb > 1 - Supported
.... .0.. = Indicator 22: UTRAN measurements, reporting and measurement reporting event B2 in E-UTRA connected mode - Not supported
.... ..0. = Indicator 23: GERAN measurements, reporting and measurement reporting event B2 in E-UTRA connected mode - Not supported
.... ...0 = Indicator 24: 1xRTT measurements, reporting and measurement reporting event B2 in E-UTRA connected mode - Not supported
1... .... = Indicator 25: Inter-frequency measurements and reporting in E-UTRA connected mode - Supported
.0.. .... = Indicator 26: HRPD measurements, reporting and measurement reporting event B2 in E-UTRA connected mode - Not supported
..0. .... = Indicator 27: EUTRA RRC_CONNECTED to UTRA CELL_DCH CS handover - Not supported
...1 .... = Indicator 28: TTI bundling - Supported
.... 1... = Indicator 29: Semi-Persistent Scheduling - Supported
.... .0.. = Indicator 30: Handover between FDD and TDD - Not supported
.... ..1. = Indicator 31: Mechanisms defined for cells broadcasting multi band information - Supported
.... ...0 = Indicator 32: Undefined - Not supported
interRAT-Parameters
nonCriticalExtension
phyLayerParameters-v920
enhancedDualLayerTDD-r9: supported (0)
interRAT-ParametersGERAN-v920
csg-ProximityIndicationParameters-r9
neighCellSI-AcquisitionParameters-r9
intraFreqSI-AcquisitionForHO-r9: supported (0)
interFreqSI-AcquisitionForHO-r9: supported (0)
son-Parameters-r9
rach-Report-r9: supported (0)
nonCriticalExtension
lateNonCriticalExtension: 8000000000
UE-EUTRA-Capability-v9a0-IEs
featureGroupIndRel9Add-r9: 00000000 [bit length 32, 0000 0000 0000 0000 0000 0000 0000 0000 decimal value 0]
0... .... = Indicator 33: Inter-RAT ANR features for UTRAN FDD - Not supported
.0.. .... = Indicator 34: Inter-RAT ANR features for GERAN - Not supported
..0. .... = Indicator 35: Inter-RAT ANR features for 1xRTT - Not supported
...0 .... = Indicator 36: Inter-RAT ANR features for HRPD - Not supported
.... 0... = Indicator 37: Inter-RAT ANR features for UTRAN TDD - Not supported
.... .0.. = Indicator 38: EUTRA RRC_CONNECTED to UTRA TDD CELL_DCH PS handover - Not supported
.... ..0. = Indicator 39: UTRAN TDD measurements, reporting and measurement reporting event B2 in E-UTRA connected mode - Not supported
.... ...0 = Indicator 40: EUTRA RRC_CONNECTED to UTRA TDD CELL_DCH CS handover - Not supported
0... .... = Indicator 41: Measurement reporting event: Event B1 - Neighbour > threshold for UTRAN FDD - Not supported
.0.. .... = Indicator 42: DCI format 3a - Not supported
..0. .... = Indicator 43: Undefined - Not supported
...0 .... = Indicator 44: Undefined - Not supported
.... 0... = Indicator 45: Undefined - Not supported
.... .0.. = Indicator 46: Undefined - Not supported
.... ..0. = Indicator 47: Undefined - Not supported
.... ...0 = Indicator 48: Undefined - Not supported
0... .... = Indicator 49: Undefined - Not supported
.0.. .... = Indicator 50: Undefined - Not supported
..0. .... = Indicator 51: Undefined - Not supported
...0 .... = Indicator 52: Undefined - Not supported
.... 0... = Indicator 53: Undefined - Not supported
.... .0.. = Indicator 54: Undefined - Not supported
.... ..0. = Indicator 55: Undefined - Not supported
.... ...0 = Indicator 56: Undefined - Not supported
0... .... = Indicator 57: Undefined - Not supported
.0.. .... = Indicator 58: Undefined - Not supported
..0. .... = Indicator 59: Undefined - Not supported
...0 .... = Indicator 60: Undefined - Not supported
.... 0... = Indicator 61: Undefined - Not supported
.... .0.. = Indicator 62: Undefined - Not supported
.... ..0. = Indicator 63: Undefined - Not supported
.... ...0 = Indicator 64: Undefined - Not supported
nonCriticalExtension
phyLayerParameters-v1020
featureGroupIndRel10-r10: 00000000 [bit length 32, 0000 0000 0000 0000 0000 0000 0000 0000 decimal value 0]
0... .... = Indicator 101: DMRS with OCC (orthogonal cover code) and SGH (sequence group hopping) disabling - Not supported
.0.. .... = Indicator 102: Trigger type 1 SRS (aperiodic SRS) transmission (Up to X ports) - Not supported
..0. .... = Indicator 103: PDSCH TM9 when up to 4 CSI reference signal ports are configured - Not supported
...0 .... = Indicator 104: PDSCH TM9 for TDD when 8 CSI reference signal ports are configured - Not supported
.... 0... = Indicator 105: PUCCH RM2-0 when PDSCH TM9 is configured and RM2-1 when PDSCH TM9 and up to 4 CSI reference signal ports are configured - Not supported
.... .0.. = Indicator 106: PUCCH RM2-1 when PDSCH TM9 and 8 CSI reference signal ports are configured - Not supported
.... ..0. = Indicator 107: PUSCH RM2-0 when PDSCH TM9 is configured and RM2-2 when PDSCH TM9 and up to 4 CSI reference signal ports are configured - Not supported
.... ...0 = Indicator 108: PUSCH RM2-2 when PDSCH TM9 and 8 CSI reference signal ports are configured - Not supported
0... .... = Indicator 109: PUCCH RM1-1 submode 1 - Not supported
.0.. .... = Indicator 110: PUCCH RM1-1 submode 2 - Not supported
..0. .... = Indicator 111: Measurement reporting trigger Event A6 - Not supported
...0 .... = Indicator 112: SCell addition within the Handover to EUTRA procedure - Not supported
.... 0... = Indicator 113: Trigger type 0 SRS (periodic SRS) transmission on X Serving Cells - Not supported
.... .0.. = Indicator 114: Reporting of both UTRA CPICH RSCP and Ec/N0 in a Measurement Report - Not supported
.... ..0. = Indicator 115: Time domain ICIC RLM/RRM / ICIC RRM / ICIC CSI measurement sf restriction for the serving cell / neighbour cells - Not supported
.... ...0 = Indicator 116: Relative transmit phase continuity for spatial multiplexing in UL - Not supported
0... .... = Indicator 117: Undefined - Not supported
.0.. .... = Indicator 118: Undefined - Not supported
..0. .... = Indicator 119: Undefined - Not supported
...0 .... = Indicator 120: Undefined - Not supported
.... 0... = Indicator 121: Undefined - Not supported
.... .0.. = Indicator 122: Undefined - Not supported
.... ..0. = Indicator 123: Undefined - Not supported
.... ...0 = Indicator 124: Undefined - Not supported
0... .... = Indicator 125: Undefined - Not supported
.0.. .... = Indicator 126: Undefined - Not supported
..0. .... = Indicator 127: Undefined - Not supported
...0 .... = Indicator 128: Undefined - Not supported
.... 0... = Indicator 129: Undefined - Not supported
.... .0.. = Indicator 130: Undefined - Not supported
.... ..0. = Indicator 131: Undefined - Not supported
.... ...0 = Indicator 132: Undefined - Not supported
nonCriticalExtension
nonCriticalExtension
nonCriticalExtension
pdcp-Parameters-v1130
rf-Parameters-v1130
measParameters-v1130
interRAT-ParametersCDMA2000-v1130
otherParameters-r11
nonCriticalExtension
nonCriticalExtension
nonCriticalExtension
nonCriticalExtension
measParameters-v1250
extendedMaxMeasId-r12: supported (0)
终端发送UE Capability消息
message: c1 (0)
c1: ueCapabilityInformation (7)
ueCapabilityInformation
rrc-TransactionIdentifier: 0
criticalExtensions: c1 (0)
c1: ueCapabilityInformation-r8 (0)
ueCapabilityInformation-r8
ue-CapabilityRAT-ContainerList: 1 item
Item 0
UE-CapabilityRAT-Container
rat-Type: eutra (0)
ueCapabilityRAT-Container: c9be0102bd529040b82e0bff06ec4d00141b82c000000000…
UE-EUTRA-Capability
accessStratumRelease: rel10 (2)
ue-Category: 4
pdcp-Parameters
supportedROHC-Profiles
...1 .... profile0x0001-r15: True
.... 1... profile0x0002-r15: True
.... .1.. profile0x0003-r15: True
.... ..1. profile0x0004-r15: True
.... ...0 profile0x0006-r15: False
0... .... profile0x0101-r15: False
.0.. .... profile0x0102-r15: False
..0. .... profile0x0103-r15: False
...0 .... profile0x0104-r15: False
maxNumberROHC-ContextSessions: cs4 (1)
phyLayerParameters
0... .... ue-TxAntennaSelectionSupported: False
.0.. .... ue-SpecificRefSigsSupported: False
rf-Parameters
supportedBandListEUTRA: 3 items
Item 0
SupportedBandEUTRA
bandEUTRA: 48
.... ..0. halfDuplex: False
Item 1
SupportedBandEUTRA
bandEUTRA: 43
.... .0.. halfDuplex: False
Item 2
SupportedBandEUTRA
bandEUTRA: 42
.... 0... halfDuplex: False
measParameters
bandListEUTRA: 3 items
Item 0
BandInfoEUTRA
interFreqBandList: 3 items
Item 0
InterFreqBandInfo
..1. .... interFreqNeedForGaps: True
[bandEUTRA: 48 -> band 48]
Item 1
InterFreqBandInfo
...1 .... interFreqNeedForGaps: True
[bandEUTRA: 48 -> band 43]
Item 2
InterFreqBandInfo
.... 1... interFreqNeedForGaps: True
[bandEUTRA: 48 -> band 42]
Item 1
BandInfoEUTRA
interFreqBandList: 3 items
Item 0
InterFreqBandInfo
.... 1... interFreqNeedForGaps: True
[bandEUTRA: 43 -> band 48]
Item 1
InterFreqBandInfo
.... .1.. interFreqNeedForGaps: True
[bandEUTRA: 43 -> band 43]
Item 2
InterFreqBandInfo
.... ..1. interFreqNeedForGaps: True
[bandEUTRA: 43 -> band 42]
Item 2
BandInfoEUTRA
interFreqBandList: 3 items
Item 0
InterFreqBandInfo
.... ..1. interFreqNeedForGaps: True
[bandEUTRA: 42 -> band 48]
Item 1
InterFreqBandInfo
.... ...1 interFreqNeedForGaps: True
[bandEUTRA: 42 -> band 43]
Item 2
InterFreqBandInfo
1... .... interFreqNeedForGaps: True
[bandEUTRA: 42 -> band 42]
featureGroupIndicators: fe0dd89a [bit length 32, 1111 1110 0000 1101 1101 1000 1001 1010 decimal value 426232282]
1... .... = Indicator 1: Intra-subframe freq hopping for PUSCH scheduled by UL grant; DCI format 3a; Aperiodc CQI/PMI/RI report on PUSCH: Mode 2-0 & 2-2 - Supported
.1.. .... = Indicator 2: Simultaneous CQI & ACK/NACK on PUCCH (format 2a/2b); Absolute TPC command for PUSCH Resource alloc type 1 for PDSCH; Periodic CQI/PMI/RI report on PUCCH: Mode 2-0 & 2-1 - Supported
..1. .... = Indicator 3: 5bit RLC UM SN; 7bit PDCP SN - Supported
...1 .... = Indicator 4: Short DRX cycle - Supported
.... 1... = Indicator 5: Long DRX cycle; DRX command MAC control element - Supported
.... .1.. = Indicator 6: Prioritised bit rate - Supported
.... ..1. = Indicator 7: RLC UM - Supported
.... ...0 = Indicator 8: EUTRA RRC_CONNECTED to UTRA CELL_DCH PS handover - Not supported
0... .... = Indicator 9: EUTRA RRC_CONNECTED to GERAN GSM_Dedicated handover - Not Supported
.0.. .... = Indicator 10: EUTRA RRC_CONNECTED to GERAN (Packet_) Idle by Cell Change Order; EUTRA RRC_CONNECED to GERAN (Packet_) Idle by Cell Change Order with NACC - Not supported
..0. .... = Indicator 11: EUTRA RRC_CONNECTED to CDMA2000 1xRTT CS Active handover - Not supported
...0 .... = Indicator 12: EUTRA RRC_CONNECTED to CDMA2000 HRPD Active handover - Not supported
.... 1... = Indicator 13: Inter-frequency handover (within FDD or TDD) - Supported
.... .1.. = Indicator 14: Measurement reporting event: Event A4 - Neighbour > threshold; Measurement reportig event: Event A5 - Serving < threshold1 & Neighbour > threshold2 - Supported
.... ..0. = Indicator 15: Measurement reporting event: Event B1 - Neighbour > threshold - Not supported
.... ...1 = Indicator 16: non-ANR related periodical measurement reporting - Supported
1... .... = Indicator 17: ANR related intra-frequency measurement reporting events - Supported
.1.. .... = Indicator 18: ANR related inter-frequency measurement reporting events - Supported
..0. .... = Indicator 19: ANR related inter-RAT measurement reporting events - Not supported
...1 .... = Indicator 20: SRB1 and SRB2 for DCCH + 8x AM DRB; SRB1 and SRB2 for DCCH + 5x AM DRB + 3x UM DRB(if indicator 7 is supported) - Supported
.... 1... = Indicator 21: Predefined intra- and inter-subframe frequency hopping for PUSCH with N_sb > 1; Prdefined inter-subframe frequency hopping for PUSCH with N_sb > 1 - Supported
.... .0.. = Indicator 22: UTRAN measurements, reporting and measurement reporting event B2 in E-UTRA connectd mode - Not supported
.... ..0. = Indicator 23: GERAN measurements, reporting and measurement reporting event B2 in E-UTRA connectd mode - Not supported
.... ...0 = Indicator 24: 1xRTT measurements, reporting and measurement reporting event B2 in E-UTRA connectd mode - Not supported
1... .... = Indicator 25: Inter-frequency measurements and reporting in E-UTRA connected mode - Supported
.0.. .... = Indicator 26: HRPD measurements, reporting and measurement reporting event B2 in E-UTRA connecte mode - Not supported
..0. .... = Indicator 27: EUTRA RRC_CONNECTED to UTRA CELL_DCH CS handover - Not supported
...1 .... = Indicator 28: TTI bundling - Supported
.... 1... = Indicator 29: Semi-Persistent Scheduling - Supported
.... .0.. = Indicator 30: Handover between FDD and TDD - Not supported
.... ..1. = Indicator 31: Mechanisms defined for cells broadcasting multi band information - Supported
.... ...0 = Indicator 32: Undefined - Not supported
interRAT-Parameters
nonCriticalExtension
phyLayerParameters-v920
enhancedDualLayerTDD-r9: supported (0)
interRAT-ParametersGERAN-v920
csg-ProximityIndicationParameters-r9
neighCellSI-AcquisitionParameters-r9
intraFreqSI-AcquisitionForHO-r9: supported (0)
interFreqSI-AcquisitionForHO-r9: supported (0)
son-Parameters-r9
rach-Report-r9: supported (0)
nonCriticalExtension
lateNonCriticalExtension: 8000000000
UE-EUTRA-Capability-v9a0-IEs
featureGroupIndRel9Add-r9: 00000000 [bit length 32, 0000 0000 0000 0000 0000 0000 0000 0000 dcimal value 0]
0... .... = Indicator 33: Inter-RAT ANR features for UTRAN FDD - Not supported
.0.. .... = Indicator 34: Inter-RAT ANR features for GERAN - Not supported
..0. .... = Indicator 35: Inter-RAT ANR features for 1xRTT - Not supported
...0 .... = Indicator 36: Inter-RAT ANR features for HRPD - Not supported
.... 0... = Indicator 37: Inter-RAT ANR features for UTRAN TDD - Not supported
.... .0.. = Indicator 38: EUTRA RRC_CONNECTED to UTRA TDD CELL_DCH PS handover - Not supportd
.... ..0. = Indicator 39: UTRAN TDD measurements, reporting and measurement reporting event2 in E-UTRA connected mode - Not supported
.... ...0 = Indicator 40: EUTRA RRC_CONNECTED to UTRA TDD CELL_DCH CS handover - Not supportd
0... .... = Indicator 41: Measurement reporting event: Event B1 - Neighbour > threshold forTRAN FDD - Not supported
.0.. .... = Indicator 42: DCI format 3a - Not supported
..0. .... = Indicator 43: Undefined - Not supported
...0 .... = Indicator 44: Undefined - Not supported
.... 0... = Indicator 45: Undefined - Not supported
.... .0.. = Indicator 46: Undefined - Not supported
.... ..0. = Indicator 47: Undefined - Not supported
.... ...0 = Indicator 48: Undefined - Not supported
0... .... = Indicator 49: Undefined - Not supported
.0.. .... = Indicator 50: Undefined - Not supported
..0. .... = Indicator 51: Undefined - Not supported
...0 .... = Indicator 52: Undefined - Not supported
.... 0... = Indicator 53: Undefined - Not supported
.... .0.. = Indicator 54: Undefined - Not supported
.... ..0. = Indicator 55: Undefined - Not supported
.... ...0 = Indicator 56: Undefined - Not supported
0... .... = Indicator 57: Undefined - Not supported
.0.. .... = Indicator 58: Undefined - Not supported
..0. .... = Indicator 59: Undefined - Not supported
...0 .... = Indicator 60: Undefined - Not supported
.... 0... = Indicator 61: Undefined - Not supported
.... .0.. = Indicator 62: Undefined - Not supported
.... ..0. = Indicator 63: Undefined - Not supported
.... ...0 = Indicator 64: Undefined - Not supported
nonCriticalExtension
phyLayerParameters-v1020
featureGroupIndRel10-r10: 00000000 [bit length 32, 0000 0000 0000 0000 0000 0000 0000 0000 decima value 0]
0... .... = Indicator 101: DMRS with OCC (orthogonal cover code) and SGH (sequence group hopping disabling - Not supported
.0.. .... = Indicator 102: Trigger type 1 SRS (aperiodic SRS) transmission (Up to X ports) - Not supported
..0. .... = Indicator 103: PDSCH TM9 when up to 4 CSI reference signal ports are configured - No supported
...0 .... = Indicator 104: PDSCH TM9 for TDD when 8 CSI reference signal ports are configured -ot supported
.... 0... = Indicator 105: PUCCH RM2-0 when PDSCH TM9 is configured and RM2-1 when PDSCH TM9 andup to 4 CSI reference signal ports are configured - Not supported
.... .0.. = Indicator 106: PUCCH RM2-1 when PDSCH TM9 and 8 CSI reference signal ports are confiured - Not supported
.... ..0. = Indicator 107: PUSCH RM2-0 when PDSCH TM9 is configured and RM2-2 when PDSCH TM9 andup to 4 CSI reference signal ports are configured - Not supported
.... ...0 = Indicator 108: PUSCH RM2-2 when PDSCH TM9 and 8 CSI reference signal ports are confiured - Not supported
0... .... = Indicator 109: PUCCH RM1-1 submode 1 - Not supported
.0.. .... = Indicator 110: PUCCH RM1-1 submode 2 - Not supported
..0. .... = Indicator 111: Measurement reporting trigger Event A6 - Not supported
...0 .... = Indicator 112: SCell addition within the Handover to EUTRA procedure - Not supported
.... 0... = Indicator 113: Trigger type 0 SRS (periodic SRS) transmission on X Serving Cells - Nt supported
.... .0.. = Indicator 114: Reporting of both UTRA CPICH RSCP and Ec/N0 in a Measurement Report -Not supported
.... ..0. = Indicator 115: Time domain ICIC RLM/RRM / ICIC RRM / ICIC CSI measurement sf restricion for the serving cell / neighbour cells - Not supported
.... ...0 = Indicator 116: Relative transmit phase continuity for spatial multiplexing in UL - Nt supported
0... .... = Indicator 117: Undefined - Not supported
.0.. .... = Indicator 118: Undefined - Not supported
..0. .... = Indicator 119: Undefined - Not supported
...0 .... = Indicator 120: Undefined - Not supported
.... 0... = Indicator 121: Undefined - Not supported
.... .0.. = Indicator 122: Undefined - Not supported
.... ..0. = Indicator 123: Undefined - Not supported
.... ...0 = Indicator 124: Undefined - Not supported
0... .... = Indicator 125: Undefined - Not supported
.0.. .... = Indicator 126: Undefined - Not supported
..0. .... = Indicator 127: Undefined - Not supported
...0 .... = Indicator 128: Undefined - Not supported
.... 0... = Indicator 129: Undefined - Not supported
.... .0.. = Indicator 130: Undefined - Not supported
.... ..0. = Indicator 131: Undefined - Not supported
.... ...0 = Indicator 132: Undefined - Not supported
nonCriticalExtension
nonCriticalExtension
nonCriticalExtension
pdcp-Parameters-v1130
rf-Parameters-v1130
measParameters-v1130
interRAT-ParametersCDMA2000-v1130
otherParameters-r11
nonCriticalExtension
nonCriticalExtension
nonCriticalExtension
nonCriticalExtension
measParameters-v1250
extendedMaxMeasId-r12: supported (0)
微戎WR100发送RRC Connection Reconfiguration
message: c1 (0)
c1: rrcConnectionReconfiguration (4)
rrcConnectionReconfiguration
rrc-TransactionIdentifier: 0
criticalExtensions: c1 (0)
c1: rrcConnectionReconfiguration-r8 (0)
rrcConnectionReconfiguration-r8
dedicatedInfoNASList: 1 item
Item 0
DedicatedInfoNAS: 27bbed96950307420125060000f1100001003e5203c10109…
Non-Access-Stratum (NAS)PDU
0010 .... = Security header type: Integrity protected and ciphered (2)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
Message authentication code: 0xbbed9695
Sequence number: 3
0000 .... = Security header type: Plain NAS message, not security protected (0)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
NAS EPS Mobility Management Message Type: Attach accept (0x42)
0000 .... = Spare half octet: 0
.... 0... = Spare bit(s): 0x00
.... .001 = Attach result: EPS only (1)
GPRS Timer - T3412 value
GPRS Timer: 5 min
001. .... = Unit: value is incremented in multiples of 1 minute (1)
...0 0101 = Timer value: 5
Tracking area identity list - TAI list
Length: 6
0... .... = Spare bit(s): 0x00
.00. .... = Type of list: list of TACs belonging to one PLMN, with non-consecutive TAC values (0)
...0 0000 = Number of elements: 0 [+1 = 1 element(s)]
Mobile Country Code (MCC): Unknown (1)
Mobile Network Code (MNC): Unknown (01)
Tracking area code(TAC): 1
ESM message container
Length: 62
ESM message container contents: 5203c101091b0764656661756c74066d6e63303031066d63…
0101 .... = EPS bearer identity: EPS bearer identity value 5 (5)
.... 0010 = Protocol discriminator: EPS session management messages (0x2)
Procedure transaction identity: 3
NAS EPS session management messages: Activate default EPS bearer context request (0xc1)
EPS quality of service
Length: 1
Quality of Service Class Identifier (QCI): QCI 9 (9)
Access Point Name
Length: 27
APN: default.mnc001.mcc001.gprs
PDN address
Length: 5
0000 0... = Spare bit(s): 0x00
PDN type: IPv4 (1)
PDN IPv4: 192.168.9.2
Protocol Configuration Options
Element ID: 0x27
Length: 21
[Link direction: Network to MS (1)]
1... .... = Extension: True
.... .000 = Configuration Protocol: PPP for use with IP PDP type or IP PDN type (0)
Protocol or Container ID: Internet Protocol Control Protocol (0x8021)
Length: 0x0a (10)
PPP IP Control Protocol
Code: Configuration Nak (3)
Identifier: 0 (0x00)
Length: 10
Options: (6 bytes), Primary DNS Server IP Address
Primary DNS Server IP Address
Type: Primary DNS Server IP Address (129)
Length: 6
Primary DNS Address: 202.96.134.133
Protocol or Container ID: DNS Server IPv4 Address (0x000d)
Length: 0x04 (4)
IPv4: 202.96.134.133
EPS mobile identity - GUTI
Element ID: 0x50
Length: 11
.... 0... = Odd/even indication: Even number of identity digits
.... .110 = Type of identity: GUTI (6)
Mobile Country Code (MCC): Unknown (1)
Mobile Network Code (MNC): Unknown (01)
MME Group ID: 32769
MME Code: 1
M-TMSI: 0xaa057ccb
Emergency Number List
Element ID: 0x34
Length: 8
Emergency Number Information: 1
Emergency Number Info length: 3
000. .... = Spare bit(s): 0
...1 .... = Mountain Rescue: True
.... 1... = Marine Guard: True
.... .1.. = Fire Brigade: True
.... ..1. = Ambulance: True
.... ...1 = Police: True
Emergency BCD Number: 911
Emergency Number Information: 2
Emergency Number Info length: 3
000. .... = Spare bit(s): 0
...1 .... = Mountain Rescue: True
.... 1... = Marine Guard: True
.... .1.. = Fire Brigade: True
.... ..1. = Ambulance: True
.... ...1 = Police: True
Emergency BCD Number: 112
EPS network feature support
Element ID: 0x64
Length: 1
0... .... = Control plane CIoT EPS optimization: Not supported
.0.. .... = EMM-REGISTERED w/o PDN connectivity: Not supported
..0. .... = Support of EXTENDED SERVICE REQUEST for packet services: Not supported
...0 0... = CS-LCS: no information about support of location services via CS domain is available (0)
.... .0.. = Location services via EPC: Not supported
.... ..0. = Emergency bearer services in S1 mode: Not supported
.... ...1 = IMS voice over PS session in S1 mode: Supported
radioResourceConfigDedicated
srb-ToAddModList: 1 item
Item 0
SRB-ToAddMod
srb-Identity: 2
rlc-Config: explicitValue (0)
explicitValue: am (0)
am
ul-AM-RLC
t-PollRetransmit: ms60 (11)
pollPDU: pInfinity (7)
pollByte: kBinfinity (14)
maxRetxThreshold: t32 (7)
dl-AM-RLC
t-Reordering: ms45 (9)
t-StatusProhibit: ms0 (0)
logicalChannelConfig: defaultValue (1)
defaultValue: NULL
drb-ToAddModList: 1 item
Item 0
DRB-ToAddMod
eps-BearerIdentity: 5
drb-Identity: 1
pdcp-Config
discardTimer: infinity (7)
rlc-AM
...1 .... statusReportRequired: True
headerCompression: notUsed (0)
notUsed: NULL
rlc-Config: am (0)
am
ul-AM-RLC
t-PollRetransmit: ms80 (15)
pollPDU: p64 (4)
pollByte: kB125 (4)
maxRetxThreshold: t32 (7)
dl-AM-RLC
t-Reordering: ms65 (13)
t-StatusProhibit: ms10 (2)
logicalChannelIdentity: 3
logicalChannelConfig
ul-SpecificParameters
priority: 15
prioritisedBitRate: kBps8 (1)
bucketSizeDuration: ms100 (1)
logicalChannelGroup: 3
mac-MainConfig: explicitValue (0)
explicitValue
drx-Config: setup (1)
setup
onDurationTimer: psf10 (7)
drx-InactivityTimer: psf200 (15)
drx-RetransmissionTimer: psf2 (1)
longDRX-CycleStartOffset: sf320 (9)
sf320: 31
shortDRX
shortDRX-Cycle: sf20 (5)
drxShortCycleTimer: 1 shortDRX-Cycle
timeAlignmentTimerDedicated: infinity (7)
physicalConfigDedicated
cqi-ReportConfig
nomPDSCH-RS-EPRE-Offset: 0dB (0)
cqi-ReportPeriodic: setup (1)
setup
cqi-PUCCH-ResourceIndex: 0
cqi-pmi-ConfigIndex: 68
cqi-FormatIndicatorPeriodic: widebandCQI (0)
widebandCQI: NULL
.1.. .... simultaneousAckNackAndCQI: True
CBRS终端发送RRC Connection Reconfiguration Complete
message: c1 (0)
c1: rrcConnectionReconfigurationComplete (2)
rrcConnectionReconfigurationComplete
rrc-TransactionIdentifier: 0
criticalExtensions: rrcConnectionReconfigurationComplete-r8 (0)
rrcConnectionReconfigurationComplete-r8
微戎WR100发送NAS Attach accept
Non-Access-Stratum (NAS)PDU
0010 .... = Security header type: Integrity protected and ciphered (2)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
Message authentication code: 0x00000000
Sequence number: 3
0000 .... = Security header type: Plain NAS message, not security protected (0)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
NAS EPS Mobility Management Message Type: Attach accept (0x42)
0000 .... = Spare half octet: 0
.... 0... = Spare bit(s): 0x00
.... .001 = Attach result: EPS only (1)
GPRS Timer - T3412 value
GPRS Timer: 5 min
001. .... = Unit: value is incremented in multiples of 1 minute (1)
...0 0101 = Timer value: 5
Tracking area identity list - TAI list
Length: 6
0... .... = Spare bit(s): 0x00
.00. .... = Type of list: list of TACs belonging to one PLMN, with non-consecutive TAC values (0)
...0 0000 = Number of elements: 0 [+1 = 1 element(s)]
Mobile Country Code (MCC): Unknown (1)
Mobile Network Code (MNC): Unknown (01)
Tracking area code(TAC): 1
ESM message container
Length: 62
ESM message container contents: 5203c101091b0764656661756c74066d6e63303031066d63…
0101 .... = EPS bearer identity: EPS bearer identity value 5 (5)
.... 0010 = Protocol discriminator: EPS session management messages (0x2)
Procedure transaction identity: 3
NAS EPS session management messages: Activate default EPS bearer context request (0xc1)
EPS quality of service
Length: 1
Quality of Service Class Identifier (QCI): QCI 9 (9)
Access Point Name
Length: 27
APN: default.mnc001.mcc001.gprs
PDN address
Length: 5
0000 0... = Spare bit(s): 0x00
PDN type: IPv4 (1)
PDN IPv4: 192.168.9.2
Protocol Configuration Options
Element ID: 0x27
Length: 21
[Link direction: Network to MS (1)]
1... .... = Extension: True
.... .000 = Configuration Protocol: PPP for use with IP PDP type or IP PDN type (0)
Protocol or Container ID: Internet Protocol Control Protocol (0x8021)
Length: 0x0a (10)
PPP IP Control Protocol
Code: Configuration Nak (3)
Identifier: 0 (0x00)
Length: 10
Options: (6 bytes), Primary DNS Server IP Address
Primary DNS Server IP Address
Type: Primary DNS Server IP Address (129)
Length: 6
Primary DNS Address: 202.96.134.133
Protocol or Container ID: DNS Server IPv4 Address (0x000d)
Length: 0x04 (4)
IPv4: 202.96.134.133
EPS mobile identity - GUTI
Element ID: 0x50
Length: 11
.... 0... = Odd/even indication: Even number of identity digits
.... .110 = Type of identity: GUTI (6)
Mobile Country Code (MCC): Unknown (1)
Mobile Network Code (MNC): Unknown (01)
MME Group ID: 32769
MME Code: 1
M-TMSI: 0xaa057ccb
Emergency Number List
Element ID: 0x34
Length: 8
Emergency Number Information: 1
Emergency Number Info length: 3
000. .... = Spare bit(s): 0
...1 .... = Mountain Rescue: True
.... 1... = Marine Guard: True
.... .1.. = Fire Brigade: True
.... ..1. = Ambulance: True
.... ...1 = Police: True
Emergency BCD Number: 911
Emergency Number Information: 2
Emergency Number Info length: 3
000. .... = Spare bit(s): 0
...1 .... = Mountain Rescue: True
.... 1... = Marine Guard: True
.... .1.. = Fire Brigade: True
.... ..1. = Ambulance: True
.... ...1 = Police: True
Emergency BCD Number: 112
EPS network feature support
Element ID: 0x64
Length: 1
0... .... = Control plane CIoT EPS optimization: Not supported
.0.. .... = EMM-REGISTERED w/o PDN connectivity: Not supported
..0. .... = Support of EXTENDED SERVICE REQUEST for packet services: Not supported
...0 0... = CS-LCS: no information about support of location services via CS domain is available (0)
.... .0.. = Location services via EPC: Not supported
.... ..0. = Emergency bearer services in S1 mode: Not supported
.... ...1 = IMS voice over PS session in S1 mode: Supported
CBRS终端回复NAS Attach complete，至此终端入网成功
Non-Access-Stratum (NAS)PDU
0010 .... = Security header type: Integrity protected and ciphered (2)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
Message authentication code: 0x00000000
Sequence number: 5
0000 .... = Security header type: Plain NAS message, not security protected (0)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
NAS EPS Mobility Management Message Type: Attach complete (0x43)
ESM message container
Length: 3
ESM message container contents: 5200c2
0101 .... = EPS bearer identity: EPS bearer identity value 5 (5)
.... 0010 = Protocol discriminator: EPS session management messages (0x2)
Procedure transaction identity: 0
NAS EPS session management messages: Activate default EPS bearer context accept (0xc2)
CBRS终端收到微戎WR100下发的NAS EMM information，这个消息包含了网络名称和时间信息。
Non-Access-Stratum (NAS)PDU
0010 .... = Security header type: Integrity protected and ciphered (2)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
Message authentication code: 0x00000000
Sequence number: 4
0000 .... = Security header type: Plain NAS message, not security protected (0)
.... 0111 = Protocol discriminator: EPS mobility management messages (0x7)
NAS EPS Mobility Management Message Type: EMM information (0x61)
Network Name - Full name for network
Element ID: 0x43
Length: 14
1... .... = Extension: No Extension
.000 .... = Coding Scheme: Cell Broadcast data coding scheme, GSM default alphabet, language unspecified, defined in 3GPP TS 23.038 (0)
.... 0... = Add CI: The MS should not add the letters for the Country's Initials to the text string
.... .110 = Number of spare bits in last octet: bits 3 to 8(inclusive) are spare and set to '0' in octet n (6)
Text String: Weiron Network
Network Name - Short Name
Element ID: 0x45
Length: 7
1... .... = Extension: No Extension
.000 .... = Coding Scheme: Cell Broadcast data coding scheme, GSM default alphabet, language unspecified, defined in 3GPP TS 23.038 (0)
.... 0... = Add CI: The MS should not add the letters for the Country's Initials to the text string
.... .110 = Number of spare bits in last octet: bits 3 to 8(inclusive) are spare and set to '0' in octet n (6)
Text String: Weiron
Time Zone - Local
Element ID: 0x46
Timezone: GMT + 0 hours 0 minutes
Time Zone and Time - Universal Time and Local Time Zone
Element ID: 0x47
Time: Aug 24, 2019 14:34:42.000000000
Timezone: GMT + 0 hours 0 minutes
Daylight Saving Time
Element ID: 0x49
Length: 1
0000 00.. = Spare bit(s): 0
.... ..00 = DST Adjustment: No adjustment for Daylight Saving Time (0)
1978
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
