Linux配置防火墙，开启80端口

Linux配置防火墙，开启80端口

在Linux输入命令 vi /etc/sysconfig/iptables ,然后按字母 i 进入编辑模式，在添加如下防火墙规则：

-A INPUT -m state –state NEW -m tcp -p tcp –dport 80 -j ACCEPT（允许80端口通过防火墙）

把上代码添加到默认的22端口这条规则的下面，添加好之后防火墙规则如下所示：

# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state –state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m state –state NEW -m tcp -p tcp –dport 22 -j ACCEPT
-A INPUT -m state –state NEW -m tcp -p tcp –dport 80 -j ACCEPT
-A INPUT -j REJECT –reject-with icmp-host-prohibited
-A FORWARD -j REJECT –reject-with icmp-host-prohibited
COMMIT

编辑成功后按 esc ，然后输入 :wq 退出编辑
退出编辑后输入 /etc/init.d/iptables restart 重启防火墙使配置生效