大步骤：
1 编译红帽6.2内核（把IPX，NCPFS编译进内核，再选上mars_nwe 选上）
2 启动新制作的内核
3 配置mars_nwe，并启动
1 编译红帽6.2内核（把IPX，NCPFS编译进内核，再选上mars_nwe 选上）
红帽是发行版，编译有点老火，我是编的原代码，我做的具体步骤如下：
rpm -ivh kernel-2.6.32-220.el6.src.rpm
cd $HOME/rpmbuild/SPEC
rpmbuild -bp --target=i686 kernel.spec
cd $HOME/rpmbuild/BUILD
make menuconfig (注意：把IPX，NCPFS编译进内核，再选上mars_nwe 选上)
make clean
make
make modules_install
修改/boot/grub/menu.list
reboot
2 重启没得啥什么说的
3
3 配置mars_nwe，并启动
2改名字
3注释掉
4改了（这个根据具体情况而定）
12改了
13改了
14改了
15改了
其它不娈：
我的配置如下：
#
# This is the configuration-file for "mars_nwe", a free netware-emulator
# for Linux.
#
# last change: 17-Jul-96
# This file specifies which Linux-resources (printers, users, directories)
# should be accessible to the DOS-clients via "mars_nwe". Furthermore
# some general parameters are configured here.
# Some options of "mars_nwe" can only be altered by editing the the file
# `config.h' and re-compiling "mars_nwe", please see there for more
# information.
# Syntax of this config-file:
# - everything after a "#" is treated as a comment (particularly
# it does never belong to the values themselves)
# - entries _must_ begin with a number, indicating the section
# they belong to
# - hexadecimal values are prepended by "0x"
#
# All examples are verbatim.
#
# The term "DOS-client" does not refer to the special operating-system
# "DOS" in _this_ file. "DOS-client" is only a synomym for all possible
# ipx-clients (it's choosen for the people who are confused by the
# meaning of "client" and "server").
# The "Linux-side" of the game is always the "mars_nwe"-server.
# =========================================================================
# Section 1: volumes (required)
#
# In this section you list all Linux-directories accessible via "mars_nwe".
#
# To be more precise: a mapping from Linux-directories to mars_nwe-volumes
# is done. (Volumes are the beasts you can map to drive letters under DOS
# using "map.exe").
#
# Linux-directory mars_nwe-volume map.exe DOS-Drive
# /var/local/nwe/SYS -------> SYS -------------> W:
#
# More than one entry is allowed in this section.
# The maximum number of volumes is a compile-time option that must be
# specified in `config.h' before compiling mars_nwe.
#
# Please note that at least the volume "SYS" must be defined and it must
# contain the following sub-directories: LOGIN, PUBLIC, SYSTEM, MAIL.
# See the installation-instructions in the doc-directory for more infos.
#
#
# -------------------------------------------------------------------------
# Syntax:
# 1 VOLUMENAME DIRECTORY OPTIONS
#
# VOLUMENAME: the name of the mars_nwe-volume (max. 8 characters)
# DIRECTORY: the directory on your Linux-system associated with that
# volume; use the special name "~" to refer to the users
# individual home-directory
#
# OPTIONS: none or some of the following characters (without a seperator)
# k allow lowercase-filenames (if you don't set this, all
# files _must_ be upper-case)
# m removable volume (e.g. cd-roms)
# r volume is read-only and always reports "0 byte free"
# (this is intended for copies of CD-ROMs on harddisks)
# o volume has only one filesystem/device/namespace
# this is for filesystems with high inode > 0xFFFFFFF.
# because for namespace services mars_nwe normally use the
# first 4 bit of 32 bit inode for distinguish
# between several devices/namespaces for one volume.
# p "PIPE"-filesystem. All files are pipe commands.
# See `doc/PIPE-FS'.
#
# O + OS/2 namespace.
# N + NFS namespace.
# -------------------------------------------------------------------------
#
# Examples:
# 1 SYS /var/local/nwe/SYS k
# 1 HOME ~ k
# Use /var/netware for the SYS volume, and make it read-only
1 SYS /var/mars_nwe/sys k
# 1 CDROM /mnt/cdrom kmr
# 1 SYS /u3/SYS/ k
# =========================================================================
# Section 2: servername (optional)
#
# The servername is the name under which this server will show up when
# using tools like "slist" (server-list).
#
# If you don't supply an entry for this section, the hostname of your
# Linux-machine will be converted to all-uppercase and used as the servername.
#
# -------------------------------------------------------------------------
# Syntax:
# 2 SERVERNAME
#
# SERVERNAME: a name for this nw-server
# -------------------------------------------------------------------------
#
# Example:
2 MARSO # name of the server would be "MARS"
# =========================================================================
# Section 3: Number of the internal network (required)
#
# If have dealt with the TCP/IP-configuration of your Linux-Box, the term
# "ip-address" may be familiar to you. It's a numer that uniquely
# identifies your machine in the internet.
# As you might already expect, even the IPX-people use a unique number to
# identify each other. Addresses in the IPX-world always consist of a
# 4-byte "network-number" plus a 6-byte "node-number" (remember the
# ip-addresses also use 4-bytes).
#
# The numbering-rule for ipx-clients is easy: their "address" is the
# external-network of the server they are connected to plus the
# hardware-address of their own ethernet-card (6 byte). As a result of this
# rule, the clients can determine their address automatically (by listening
# to the server and looking at their own ethernet-hardware) and no
# configuration-files on the clients-side have to be maintained. (It would
# really be a nasty thing if you think of very many DOS-clients [remember:
# DOS is an OS where ordinary users can screw up the configuration files].)
#
# For internal routing purposes, a netware-server has an "internal network"
#
# As there is no organisation which regulates the use of network-numbers
# in the IPX-world, you have to run "slist" (under DOS or Linux) to
# determine a number that isn't already used by another server on your
# net. You better double-check and ask the other network administrators
# before using a random value because not all servers might be on-line when
# you "listen" to the net.
#
# A reasonable choice for the internal net-number of your mars_nwe-server
# could be the ip-address of your Linux-Box. It is reasonable because
# ip-addresse are unique and if every nw-administrator uses only this uniqe
# value, potential conflicts will be minimized. Of course this choice is
# no guarantee.
#
# Please note that you have to specify the address of your "internal
# ipx-network" in hexadecimal format (the leading "0x" indicates it).
#
#
# -------------------------------------------------------------------------
# Syntax:
# 3 INTERNAL_NET [NODE]
#
# INTERNAL_NET: the hexadecimal value of your "internal ipx-network". Use
# "0x0" or "auto" to refer to your ip-addresse (it's a kind of
# automagically setup)
# NODE: use "1" if you don't know what this entry is for (optional)
# -------------------------------------------------------------------------
#
# Example:
# 3 auto 1 # automatic setup
# 3 auto 1
# =========================================================================
# Section 4: IPX-devices (strongly recommended)
#
# This section contains information for the ipx-router built into mars_nwe
# and/or the external program "nwrouted".
# Both processes exchange the ipx-packets between your machine and the rest
# of the world (in other words: their functionallity is essential). Of
# course, to use one of both is already sufficient.
#
# Note for people with other IPX/NCP servers on the net:
# - choose the same frame-type as the other servers use
# - make sure your network-number is not already in use by another
# server (see the output of "slist" under Linux or DOS)
#
# Under Linux, it is possible to let the kernel detect all values
# automatically for you. This is only possible (and only makes sense then)
# if there are other IXP/NCP servers on the same net which are setup
# correctly.
#
#
# -------------------------------------------------------------------------
# Syntax:
# 4 NET_NUMBER DEVICE FRAME TICKS
#
# NET_NUMBER: this number is determined by the router of the physical
# network you're attached to. Use "0x0" to let the
# linux-kernel determine your network number by listening
# on the local network
# DEVICE: the network-interface associated with the NET_NUMBER. Use
# a "*" (star) to automatically setup all devices at once.
# FRAME: the frame-type of the data-packets on your local network.
# Possible values are:
# ethernet_ii
# 802.2
# 802.3 (default)
# snap
# token
# auto automatic detection of the frame-type used
# in your ipx-environment
# TICKS: the time data-packets need to get delivered over a
# certain interface. If your connection goes through several
# routers, the shortest path can be determined by summing up
# all ticks for every route and compare the results.
# (1 tick = 1/18th second)
# -------------------------------------------------------------------------
#
# Examples:
# 4 0x0 * AUTO 1 # automatic setup
# 4 0x10 eth0 802.3 1 # manual setup
# 4 0x10 eth0 802.3 1
4 0x10 eth0 802.2 1
# =========================================================================
# Section 5: Saving of ipx-routes (required)
#
# This entry controls if the information regarding the ipx-routes should be
# saved beyond the lifetime of the server.
#
# -------------------------------------------------------------------------
# Syntax:
# 5 SAVE_FLAG
#
# SAVE_FLAG:
# 0 don't save routes (default)
# 1 do save routes
# -------------------------------------------------------------------------
#
5 0
# =========================================================================
# Section 6: version-"spoofing"
#
# Some clients work better if the server tells that it is a 3.11 Server,
# although many calls (namespace services) of a real 3.11 Server are
# missing yet.
# To test the namespace calls, this entry must be set to > 0 and `config.h'
# must be altered before compiling "mars_nwe".
#
# -------------------------------------------------------------------------
# Syntax:
# 6 SERVER_VERSION
#
# SERVER_VERSION: the version-number reported to DOS-clients
# 0 Version 2.15 (default)
# 1 Version 3.11
# 2 Version 3.12 (not implemented yet)
# -------------------------------------------------------------------------
#
6 0
# =========================================================================
# Section 7: password handling of DOS-clients (required)
#
# When changing your "mars_nwe"-password from a DOS-client, this client
# (think of "LOGIN.EXE", "SYSCON.EXE" or "SETPASS.EXE") can encrypt your
# password before sending it to the "mars_nwe"-server (this improves
# security a little bit).
# In this section you can enforce encryption of user-passwords or allow
# not-encrypted sending of passwords over the net.
#
#
# On the Linux-side, passwords will only be stored in encrypted format.
#
#
# -------------------------------------------------------------------------
# Syntax:
# 7 FLAG
#
# FLAG:
# 0 enforce encryption of _all_ passwords by the DOS-client
# (default)
# 1 as "0", but allow the non-encrypted version of the
# "change password"-routine.
# 7 allow all non-encrypted stuff but no empty nwe passwords.
# 8 allow all non-encrypted stuff and also allow empty
# nwe-passwords.
# 9 use all non-encryted calls + "get crypt key" will allways fail
# so the login program will use the old unencryted calls.
# this will *not* work with all clients !! (OS2/client)
# -------------------------------------------------------------------------
7 0
# Section 8: currently not used
# Section 9: currently not used
# Section 10: UID and GID with minimal rights
# =========================================================================
#
# When loading the netware-drivers in the "autoexec.bat" of your
# DOS-client, you automatically "attach" to a netware-server.
# As a result, a new drive-letter is accessible under DOS, usally
# containing the programs "login.exe" and "slist.exe".
# Because you haven't logged in, nothing else of the netware-server
# will be visible to you. All actions requested from the DOS-client
# will be done with the following UID and GID on the Linux-side in this
# case.
# To achieve some level of security, the user/group asscociated with
# the UID and GID should only have _read_ rights on the files visible,
# _nothing_ else.
#
# On most Linux-systems, there is a user and group "nobody" defined in
# `/etc/passwd' and `/etc/group'. Use the number of that user/group
# for the following entries.
#
# -------------------------------------------------------------------------
# Syntax:
# 10 GID
# 11 UID
#
# GID numeric number of the group
# UID numeric number of the user
# -------------------------------------------------------------------------
#
# Example:
# 10 65534
# 11 65534
10 99
11 99
# =========================================================================
# Section 12: supervisor-login (required)
#
# The "supervisor" of a nw-server is much like "root" on the Linux-side.
#
# Specify a Linux-user that should be mapped to the supervisor of this
# mars_nwe-server.
# To improve security, don't use "root" for this purpose but create a
# seperate administrative account (under Linux) called "nw-adm" or similar.
#
# The nw-user defined in this section will have the mars_nwe internal UID
# "1" (remember even under Linux "root" must have the special UID "0"), so
# it is not possible to define a supervisor in section 13 (the users
# defined there will get random UIDs).
# You _can_ define a user with name "SUPERVISOR" in section 13, but he
# won't really be the "local god" on the "mars_nwe"-server.
# And of course you _can_ define a supervisor with name "GOD" or "ROOT"
# in _this_ section, which would only break the traditional naming-scheme
# of the netware-world.
#
#
# -------------------------------------------------------------------------
# Syntax:
# 12 NW_LOGIN LINUX_LOGIN [PASSWORD]
#
# NW_LOGIN: the login-name for the "mars_nwe"-server (traditionally,
# this is "SUPERVISOR")
# LINUX_LOGIN: the account on the Linux-side associated with the NW_LOGIN
# PASSWORD: the password for the NW_LOGIN. It must be clear-text but
# will be encrypted and permanent stored in the
# bindery-files, so it (the password or the whole section, at
# your option) can be deleted after the first start of
"nwserv".
#
# Make sure this file is not world-readable as long
# as the password stands here.
#
# If you leave this field blank when starting "mars_nwe" the
# first time, the supervisor-login will be completely
# disabled. In other words: there is no way to supply the
# supervisor with no password ("null-password").
# -------------------------------------------------------------------------
#
# Example:
# 12 SUPERVISOR nw-adm top-secret
12 SUPERVISOR admin 123456
# =========================================================================
# Section 13: user-logins (optional)
#
# You can provide mappings from the regular login-names of your Linux-Box
# to "mars_nwe"-logins here.
# Every "mars_nwe"-user _must_ have a login-name on the Linux side (even
# if he can't log in into the account associated with the login-name,
# because you locked it with a "*") in order to "own" files.
# If you specify a Linux-login that doesn't exist (one could think of a
# typo), the user will only have the minimal rights defined in
# sections 10/11.
#
# See section 12 for a description of the syntax.
#
# Unlike in section 12, you can define users with no password.
#
# Example:
# 13 MARTIN martin
13 admin 123456
# Section 14: currently not used
# =========================================================================
# Section 15: automatic mapping of logins (decision required)
#
# If you have a large number of accounts on your Linux-machine, you may
# want to map all Linux-logins automatically to "mars_nwe"-logins.
#
# At this stage this section is only a quick hack to make life a bit
# easier for the administrator.
#
# WARNING: as there is no algorithm to convert the encrypted
# "Linux-passwords" into the encrypted format used by the DOS-clients (and
# therefore "mars_nwe"), you have to supply a common password for all
# automatically mapped users. This is a big security concern and you
# should never make this common password public (and, of course you
# should choose a sufficient "secure" (read: difficult) password).
# Type the common password to grant access to the users login and the
# command "setpass" instead of telling the password to the user.
#
# Only those Linux-logins will handled automatically that don't have a
# "x" or "*" as their encrypted password.
#
#
# -------------------------------------------------------------------------
# Syntax:
# 15 FLAG DEFAULT_PASSWORD
#
# FLAG:
# 0 DON'T map the Linux-logins automatically to
# "mars_nwe"-logins (default)
# 1 YES, DO the automatic mapping and provide every login
# created this way with the common password given with
# "DEFAULT_PASSWORD"
# 99 re-read the logins from /etc/passwd and overwrite even the
# already existing logins from the bindery (this will also
# reset all the passwords to "DEFAULT_PASSWORD")
#
# DEFAULT_PASSWORD: the common password for all automatically created
# logins (only needed if FLAG is not "0"); everything about
# password in section 12 applies to this.
# -------------------------------------------------------------------------
15 99 123456
# =========================================================================
# Section 16: Tests on startup
#
# If you want some sanity checks at startup, set this flag to 1.
# "mars_nwe" will try to create missing directories (with the "right"
# permissions, of course) if you enable this.
#
16 1
# Section 17-20: currently not used
# =========================================================================
# Section 21: print queues (optional)
#
# Which of the printers connected to your Linux-box should be accessible
# from the DOS-clients?
# Multiple entries are allowed.
#
# -------------------------------------------------------------------------
# Syntax:
# 21 QUEUE_NAME QUEUE_DIR PRINT_COMMAND
#
# QUEUE_NAME: the name of the print queue on client-side (to make it
# perfectly clear: _not_ the Linux-queue)
# QUEUE_DIR: spooling directory for the print-jobs; this directory must
# exist before printing (_not_ the spooling-directories of
# the Linux-lpd)
# PRINT_COMMAND: command used for serving the print-jobs under Linux
# (see "man lpr" and "man magicfilter" for details)
#
# Examples:
# 21 LASER SYS:/PRINT/L lpr -Plaser
# 21 OCTOPUSS SYS:/PRINT/O lpr -Php_deskjet
# -------------------------------------------------------------------------
21 LP SYS:/PRINT/LP lp
# --------------------------------------------------------
# You usally don't want to change anything below this line
# --------------------------------------------------------
# Sections 100-106: amount of debug-information
#
# FLAG:
# 0 no debug messages
# 1 errors and notes are reported
# 99 maximum debug levels
100 0 # debug IPX KERNEL (0 | 1)
101 1 # debug NWSERV
102 0 # debug NCPSERV
103 0 # debug NWCONN
104 0 # debug (start) NWCLIENT
105 0 # debug NWBIND
106 1 # debug NWROUTED
# Sections 200-202: logging of "nwserv"
#
200 1 # 0 = no logfile and dont daemonize nwserv/nwrouted
# 1 = daemonize nwserv/nwrouted and use logfile
201 /var/log/mars_nwe.log # filename of logfile
202 0 # 1=creat new logfile, 0=append to logfile
# Sections 210,211: timing
210 5 # 1 .. 600 (default 10) seconds after server
# really goes down after a down command
211 60 # 10 .. 600 (default 60) broadcasts every x seconds
300 1 # > 0 print routing info to file every x broadcasts.
# ( normally minutes )
301 /var/run/mars_nwe.routes # filename of logfile
302 1 # 1 = creat new routing info file
# 0 = append to this file
310 7 # send wdog's only to device net < x ticks.
# 0 = allways send wdogs. < 0 = never send wdogs
400 /etc/nwserv.stations # for syntax see file in the examples directory.
401 0 # 0 = ignore entry 400, get nearest response ever enabled.
# 1 = 400 are excludes, get nearest response normally enabled.
# 2 = 400 are includes, get nearest response normally disabled.
4 重启nwserv后
就可以双击在windows下的网上邻居-整个网络-NetWare兼容网络，输入你在配置文件中设置的用户名和密码后，就可看到mars_nwe映射的盘了。
扫一扫
3085
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
