NS2中无线网络模拟之三（AODV路由分析5）

<span style="font-family: Arial, Helvetica, sans-serif;">void</span>

AODV::recvRequest(Packet *p) {
struct hdr_ip *ih = HDR_IP(p);
struct hdr_aodv_request *rq = HDR_AODV_REQUEST(p);
aodv_rt_entry *rt;

  /*
   * Drop if:
   *      - I'm the source
   *      - I recently heard this request.
   */

  if(rq->rq_src == index) {
#ifdef DEBUG
    fprintf(stderr, "%s: got my own REQUEST\n", __FUNCTION__);
#endif // DEBUG
    Packet::free(p);
    return;
  } 

 if (id_lookup(rq->rq_src, rq->rq_bcast_id)) {

#ifdef DEBUG
   fprintf(stderr, "%s: discarding request\n", __FUNCTION__);
#endif // DEBUG
 
   Packet::free(p);
   return;
 }

 /*
  * Cache the broadcast ID
  */
 id_insert(rq->rq_src, rq->rq_bcast_id);



 /* 
  * We are either going to forward the REQUEST or generate a
  * REPLY. Before we do anything, we make sure that the REVERSE
  * route is in the route table.
  */
 aodv_rt_entry *rt0; // rt0 is the reverse route 
   
   rt0 = rtable.rt_lookup(rq->rq_src);
   if(rt0 == 0) { /* if not in the route table */
   // create an entry for the reverse route.
     rt0 = rtable.rt_add(rq->rq_src);
   }
  
   rt0->rt_expire = max(rt0->rt_expire, (CURRENT_TIME + REV_ROUTE_LIFE));

   if ( (rq->rq_src_seqno > rt0->rt_seqno ) ||
    	((rq->rq_src_seqno == rt0->rt_seqno) && 
	 (rq->rq_hop_count < rt0->rt_hops)) ) {
   // If we have a fresher seq no. or lesser #hops for the 
   // same seq no., update the rt entry. Else don't bother.
rt_update(rt0, rq->rq_src_seqno, rq->rq_hop_count, ih->saddr(),
     	       max(rt0->rt_expire, (CURRENT_TIME + REV_ROUTE_LIFE)) );
     if (rt0->rt_req_timeout > 0.0) {
     // Reset the soft state and 
     // Set expiry time to CURRENT_TIME + ACTIVE_ROUTE_TIMEOUT
     // This is because route is used in the forward direction,
     // but only sources get benefited by this change
       rt0->rt_req_cnt = 0;
       rt0->rt_req_timeout = 0.0; 
       rt0->rt_req_last_ttl = rq->rq_hop_count;
       rt0->rt_expire = CURRENT_TIME + ACTIVE_ROUTE_TIMEOUT;
     }

     /* Find out whether any buffered packet can benefit from the 
      * reverse route.
      * May need some change in the following code - Mahesh 09/11/99
      */
     assert (rt0->rt_flags == RTF_UP);
     Packet *buffered_pkt;
     while ((buffered_pkt = rqueue.deque(rt0->rt_dst))) {
       if (rt0 && (rt0->rt_flags == RTF_UP)) {
	assert(rt0->rt_hops != INFINITY2);
         forward(rt0, buffered_pkt, NO_DELAY);
       }
     }
   } 
   // End for putting reverse route in rt table


 /*
  * We have taken care of the reverse route stuff.
  * Now see whether we can send a route reply. 
  */

 rt = rtable.rt_lookup(rq->rq_dst);

 // First check if I am the destination ..

 if(rq->rq_dst == index) {

#ifdef DEBUG
   fprintf(stderr, "%d - %s: destination sending reply\n",
                   index, __FUNCTION__);
#endif // DEBUG

               
   // Just to be safe, I use the max. Somebody may have
   // incremented the dst seqno.
   seqno = max(seqno, rq->rq_dst_seqno)+1;
   if (seqno%2) seqno++;

   sendReply(rq->rq_src,           // IP Destination
             1,                    // Hop Count
             index,                // Dest IP Address
             seqno,                // Dest Sequence Num
             MY_ROUTE_TIMEOUT,     // Lifetime
             rq->rq_timestamp);    // timestamp
 
   Packet::free(p);
 }

 // I am not the destination, but I may have a fresh enough route.

 else if (rt && (rt->rt_hops != INFINITY2) && 
	  	(rt->rt_seqno >= rq->rq_dst_seqno) ) {

   //assert (rt->rt_flags == RTF_UP);
   assert(rq->rq_dst == rt->rt_dst);
   //assert ((rt->rt_seqno%2) == 0);	// is the seqno even?
   sendReply(rq->rq_src,
             rt->rt_hops + 1,
             rq->rq_dst,
             rt->rt_seqno,
	     (u_int32_t) (rt->rt_expire - CURRENT_TIME),
	     //             rt->rt_expire - CURRENT_TIME,
             rq->rq_timestamp);
   // Insert nexthops to RREQ source and RREQ destination in the
   // precursor lists of destination and source respectively
   rt->pc_insert(rt0->rt_nexthop); // nexthop to RREQ source
   rt0->pc_insert(rt->rt_nexthop); // nexthop to RREQ destination

#ifdef RREQ_GRAT_RREP  

   sendReply(rq->rq_dst,
             rq->rq_hop_count,
             rq->rq_src,
             rq->rq_src_seqno,
	     (u_int32_t) (rt->rt_expire - CURRENT_TIME),
	     //             rt->rt_expire - CURRENT_TIME,
             rq->rq_timestamp);
#endif
   
// TODO: send grat RREP to dst if G flag set in RREQ using rq->rq_src_seqno, rq->rq_hop_counT
   
// DONE: Included gratuitous replies to be sent as per IETF aodv draft specification. As of now, G flag has not been dynamically used and is always set or reset in aodv-packet.h --- Anant Utgikar, 09/16/02.

	Packet::free(p);
 }
 /*
  * Can't reply. So forward the  Route Request
  */
 else {
   ih->saddr() = index;
   ih->daddr() = IP_BROADCAST;
   rq->rq_hop_count += 1;
   // Maximum sequence number seen en route
   if (rt) rq->rq_dst_seqno = max(rt->rt_seqno, rq->rq_dst_seqno);
   forward((aodv_rt_entry*) 0, p, DELAY);
 }

}

在AODV协议中，当收到请求数据包时该如何处理？以上代码为处理过程。