图片压缩方法

Android不错的图片压缩方法


一、图片质量压缩

[java]  view plain copy print ? 在CODE上查看代码片 派生到我的代码片
  1. /** 
  2.      * 质量压缩方法 
  3.      * 
  4.      * @param image 
  5.      * @return 
  6.      */  
  7.     public static Bitmap compressImage(Bitmap image) {  
  8.   
  9.         ByteArrayOutputStream baos = new ByteArrayOutputStream();  
  10.         image.compress(Bitmap.CompressFormat.JPEG, 100, baos);// 质量压缩方法,这里100表示不压缩,把压缩后的数据存放到baos中  
  11.         int options = 90;  
  12.   
  13.         while (baos.toByteArray().length / 1024 > 100) { // 循环判断如果压缩后图片是否大于100kb,大于继续压缩  
  14.             baos.reset(); // 重置baos即清空baos  
  15.             image.compress(Bitmap.CompressFormat.JPEG, options, baos);// 这里压缩options%,把压缩后的数据存放到baos中  
  16.             options -= 10;// 每次都减少10  
  17.         }  
  18.         ByteArrayInputStream isBm = new ByteArrayInputStream(baos.toByteArray());// 把压缩后的数据baos存放到ByteArrayInputStream中  
  19.         Bitmap bitmap = BitmapFactory.decodeStream(isBm, nullnull);// 把ByteArrayInputStream数据生成图片  
  20.         return bitmap;  
  21.     }  



二、按比例大小压缩 (路径获取图片)

[java]  view plain copy print ? 在CODE上查看代码片 派生到我的代码片
  1. /** 
  2.      * 图片按比例大小压缩方法 
  3.      * 
  4.      * @param srcPath (根据路径获取图片并压缩) 
  5.      * @return 
  6.      */  
  7.     public static Bitmap getimage(String srcPath) {  
  8.   
  9.         BitmapFactory.Options newOpts = new BitmapFactory.Options();  
  10.         // 开始读入图片,此时把options.inJustDecodeBounds 设回true了  
  11.         newOpts.inJustDecodeBounds = true;  
  12.         Bitmap bitmap = BitmapFactory.decodeFile(srcPath, newOpts);// 此时返回bm为空  
  13.   
  14.         newOpts.inJustDecodeBounds = false;  
  15.         int w = newOpts.outWidth;  
  16.         int h = newOpts.outHeight;  
  17.         // 现在主流手机比较多是800*480分辨率,所以高和宽我们设置为  
  18.         float hh = 800f;// 这里设置高度为800f  
  19.         float ww = 480f;// 这里设置宽度为480f  
  20.         // 缩放比。由于是固定比例缩放,只用高或者宽其中一个数据进行计算即可  
  21.         int be = 1;// be=1表示不缩放  
  22.         if (w > h && w > ww) {// 如果宽度大的话根据宽度固定大小缩放  
  23.             be = (int) (newOpts.outWidth / ww);  
  24.         } else if (w < h && h > hh) {// 如果高度高的话根据宽度固定大小缩放  
  25.             be = (int) (newOpts.outHeight / hh);  
  26.         }  
  27.         if (be <= 0)  
  28.             be = 1;  
  29.         newOpts.inSampleSize = be;// 设置缩放比例  
  30.         // 重新读入图片,注意此时已经把options.inJustDecodeBounds 设回false了  
  31.         bitmap = BitmapFactory.decodeFile(srcPath, newOpts);  
  32.         return compressImage(bitmap);// 压缩好比例大小后再进行质量压缩  
  33.     }  



三、按比例大小压缩 (Bitmap)

[java]  view plain copy print ? 在CODE上查看代码片 派生到我的代码片
  1. /** 
  2.      * 图片按比例大小压缩方法 
  3.      * 
  4.      * @param image (根据Bitmap图片压缩) 
  5.      * @return 
  6.      */  
  7.     public static Bitmap compressScale(Bitmap image) {  
  8.   
  9.         ByteArrayOutputStream baos = new ByteArrayOutputStream();  
  10.         image.compress(Bitmap.CompressFormat.JPEG, 100, baos);  
  11.   
  12.         // 判断如果图片大于1M,进行压缩避免在生成图片(BitmapFactory.decodeStream)时溢出  
  13.         if (baos.toByteArray().length / 1024 > 1024) {  
  14.             baos.reset();// 重置baos即清空baos  
  15.             image.compress(Bitmap.CompressFormat.JPEG, 80, baos);// 这里压缩50%,把压缩后的数据存放到baos中  
  16.         }  
  17.         ByteArrayInputStream isBm = new ByteArrayInputStream(baos.toByteArray());  
  18.         BitmapFactory.Options newOpts = new BitmapFactory.Options();  
  19.         // 开始读入图片,此时把options.inJustDecodeBounds 设回true了  
  20.         newOpts.inJustDecodeBounds = true;  
  21.         Bitmap bitmap = BitmapFactory.decodeStream(isBm, null, newOpts);  
  22.         newOpts.inJustDecodeBounds = false;  
  23.         int w = newOpts.outWidth;  
  24.         int h = newOpts.outHeight;  
  25.         Log.i(TAG, w + "---------------" + h);  
  26.         // 现在主流手机比较多是800*480分辨率,所以高和宽我们设置为  
  27.         // float hh = 800f;// 这里设置高度为800f  
  28.         // float ww = 480f;// 这里设置宽度为480f  
  29.         float hh = 512f;  
  30.         float ww = 512f;  
  31.         // 缩放比。由于是固定比例缩放,只用高或者宽其中一个数据进行计算即可  
  32.         int be = 1;// be=1表示不缩放  
  33.         if (w > h && w > ww) {// 如果宽度大的话根据宽度固定大小缩放  
  34.             be = (int) (newOpts.outWidth / ww);  
  35.         } else if (w < h && h > hh) { // 如果高度高的话根据高度固定大小缩放  
  36.             be = (int) (newOpts.outHeight / hh);  
  37.         }  
  38.         if (be <= 0)  
  39.             be = 1;  
  40.         newOpts.inSampleSize = be; // 设置缩放比例  
  41.         // newOpts.inPreferredConfig = Config.RGB_565;//降低图片从ARGB888到RGB565  
  42.   
  43.         // 重新读入图片,注意此时已经把options.inJustDecodeBounds 设回false了  
  44.         isBm = new ByteArrayInputStream(baos.toByteArray());  
  45.         bitmap = BitmapFactory.decodeStream(isBm, null, newOpts);  
  46.   
  47.         return compressImage(bitmap);// 压缩好比例大小后再进行质量压缩  
  48.   
  49.         //return bitmap;  
  50.     }  
在使用Python来安装geopandas包时,由于geopandas依赖于几个其他的Python库(如GDAL, Fiona, Pyproj, Shapely等),因此安装过程可能需要一些额外的步骤。以下是一个基本的安装指南,适用于大多数用户: 使用pip安装 确保Python和pip已安装: 首先,确保你的计算机上已安装了Python和pip。pip是Python的包管理工具,用于安装和管理Python包。 安装依赖库: 由于geopandas依赖于GDAL, Fiona, Pyproj, Shapely等库,你可能需要先安装这些库。通常,你可以通过pip直接安装这些库,但有时候可能需要从其他源下载预编译的二进制包(wheel文件),特别是GDAL和Fiona,因为它们可能包含一些系统级的依赖。 bash pip install GDAL Fiona Pyproj Shapely 注意:在某些系统上,直接使用pip安装GDAL和Fiona可能会遇到问题,因为它们需要编译一些C/C++代码。如果遇到问题,你可以考虑使用conda(一个Python包、依赖和环境管理器)来安装这些库,或者从Unofficial Windows Binaries for Python Extension Packages这样的网站下载预编译的wheel文件。 安装geopandas: 在安装了所有依赖库之后,你可以使用pip来安装geopandas。 bash pip install geopandas 使用conda安装 如果你正在使用conda作为你的Python包管理器,那么安装geopandas和它的依赖可能会更简单一些。 创建一个新的conda环境(可选,但推荐): bash conda create -n geoenv python=3.x anaconda conda activate geoenv 其中3.x是你希望使用的Python版本。 安装geopandas: 使用conda-forge频道来安装geopandas,因为它提供了许多地理空间相关的包。 bash conda install -c conda-forge geopandas 这条命令会自动安装geopandas及其所有依赖。 注意事项 如果你在安装过程中遇到任何问题,比如编译错误或依赖问题,请检查你的Python版本和pip/conda的版本是否是最新的,或者尝试在不同的环境中安装。 某些库(如GDAL)可能需要额外的系统级依赖,如地理空间库(如PROJ和GEOS)。这些依赖可能需要单独安装,具体取决于你的操作系统。 如果你在Windows上遇到问题,并且pip安装失败,尝试从Unofficial Windows Binaries for Python Extension Packages网站下载相应的wheel文件,并使用pip进行安装。 脚本示例 虽然你的问题主要是关于如何安装geopandas,但如果你想要一个Python脚本来重命名文件夹下的文件,在原始名字前面加上字符串"geopandas",以下是一个简单的示例: python import os # 指定文件夹路径 folder_path = 'path/to/your/folder' # 遍历文件夹中的文件 for filename in os.listdir(folder_path): # 构造原始文件路径 old_file_path = os.path.join(folder_path, filename) # 构造新文件名 new_filename = 'geopandas_' + filename # 构造新文件路径 new_file_path = os.path.join(folder_path, new_filename) # 重命名文件 os.rename(old_file_path, new_file_path) print(f'Renamed "{filename}" to "{new_filename}"') 请确保将'path/to/your/folder'替换为你想要重命名文件的实际文件夹路径。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值