no available service 'null' found, please make sure registry config correct

最近在学习阿里的分布式事务seata，在官网下载了seata sample后，想本地跑起来实施，于是选择了springcloud-eureka-seata来尝试，如下所示：

在eureka和四个示例业务模块都跑起来后，发现四个业务模块都报了下面这个错：

2020-03-14 15:57:17.298 ERROR 12748 --- [imeoutChecker_1] i.s.c.r.netty.NettyClientChannelManager  : no available service 'null' found, please make sure registry config correct

于是就百度找了些资料，发现只有在说file.conf，registry.conf配置问题，我照着配置了后，还是报错，心想为毛老是说找不到啊，这个null的service究竟是啥，一直反复看
file.conf，registry.conf这两个配置文件，后来头脑开窍了，才发现自己没有下载seata服务器下来，并且启动注册到eureka上去，于是从seaka下载，后解压：

修改conf下的 file.conf，和registry.conf内容，改为如下：
file.conf：

transport {
  # tcp udt unix-domain-socket
  type = "TCP"
  #NIO NATIVE
  server = "NIO"
  #enable heartbeat
  heartbeat = true
  # the client batch send request enable
  enableClientBatchSendRequest = false
  #thread factory for netty
  threadFactory {
    bossThreadPrefix = "NettyBoss"
    workerThreadPrefix = "NettyServerNIOWorker"
    serverExecutorThreadPrefix = "NettyServerBizHandler"
    shareBossWorker = false
    clientSelectorThreadPrefix = "NettyClientSelector"
    clientSelectorThreadSize = 1
    clientWorkerThreadPrefix = "NettyClientWorkerThread"
    # netty boss thread size,will not be used for UDT
    bossThreadSize = 1
    #auto default pin or 8
    workerThreadSize = "default"
  }
  shutdown {
    # when destroy server, wait seconds
    wait = 3
  }
  serialization = "seata"
  compressor = "none"
}
# service configuration, only used in client side
service {
  #transaction service group mapping
  vgroupMapping.my_test_tx_group = "default"
  default.grouplist = "127.0.0.1:8091"
  #degrade, current not support
  enableDegrade = false
  #disable seata
  disableGlobalTransaction = false
}
#client transaction configuration, only used in client side
client {
  rm {
    asyncCommitBufferLimit = 10000
    lock {
      retryInterval = 10
      retryTimes = 30
      retryPolicyBranchRollbackOnConflict = true
    }
    reportRetryCount = 5
    tableMetaCheckEnable = false
    reportSuccessEnable = false
    sqlParserType = druid
  }
  tm {
    commitRetryCount = 5
    rollbackRetryCount = 5
  }
  undo {
    dataValidation = true
    logSerialization = "jackson"
    logTable = "undo_log"
  }
  log {
    exceptionRate = 100
  }
}

## transaction log store, only used in server side
store {
  ## store mode: file、db
  mode = "file"
  ## file store property
  file {
    ## store location dir
    dir = "sessionStore"
    # branch session size , if exceeded first try compress lockkey, still exceeded throws exceptions
    maxBranchSessionSize = 16384
    # globe session size , if exceeded throws exceptions
    maxGlobalSessionSize = 512
    # file buffer size , if exceeded allocate new buffer
    fileWriteBufferCacheSize = 16384
    # when recover batch read size
    sessionReloadReadSize = 100
    # async, sync
    flushDiskMode = async
  }

  ## database store property
  db {
    ## the implement of javax.sql.DataSource, such as DruidDataSource(druid)/BasicDataSource(dbcp) etc.
    datasource = "dbcp"
    ## mysql/oracle/h2/oceanbase etc.
    dbType = "mysql"
    driverClassName = "com.mysql.jdbc.Driver"
    url = "jdbc:mysql://127.0.0.1:3306/seata"
    user = "mysql"
    password = "mysql"
    minConn = 1
    maxConn = 10
    globalTable = "global_table"
    branchTable = "branch_table"
    lockTable = "lock_table"
    queryLimit = 100
  }
}
## server configuration, only used in server side
server {
  recovery {
    #schedule committing retry period in milliseconds
    committingRetryPeriod = 1000
    #schedule asyn committing retry period in milliseconds
    asynCommittingRetryPeriod = 1000
    #schedule rollbacking retry period in milliseconds
    rollbackingRetryPeriod = 1000
    #schedule timeout retry period in milliseconds
    timeoutRetryPeriod = 1000
  }
  undo {
    logSaveDays = 7
    #schedule delete expired undo_log in milliseconds
    logDeletePeriod = 86400000
  }
  #unit ms,s,m,h,d represents milliseconds, seconds, minutes, hours, days, default permanent
  maxCommitRetryTimeout = "-1"
  maxRollbackRetryTimeout = "-1"
  rollbackRetryTimeoutUnlockEnable = false
}

## metrics configuration, only used in server side
metrics {
  enabled = false
  registryType = "compact"
  # multi exporters use comma divided
  exporterList = "prometheus"
  exporterPrometheusPort = 9898
}

registry.conf：

registry {
  # file 、nacos 、eureka、redis、zk、consul、etcd3、sofa
  type = "eureka"

  nacos {
    serverAddr = "localhost"
    namespace = ""
    cluster = "default"
  }
  eureka {
    serviceUrl = "http://127.0.0.1:8761/eureka"
    application = "default"
    weight = "1"
  }
  redis {
    serverAddr = "localhost:6379"
    db = "0"
  }
  zk {
    cluster = "default"
    serverAddr = "127.0.0.1:2181"
    session.timeout = 6000
    connect.timeout = 2000
  }
  consul {
    cluster = "default"
    serverAddr = "127.0.0.1:8500"
  }
  etcd3 {
    cluster = "default"
    serverAddr = "http://localhost:2379"
  }
  sofa {
    serverAddr = "127.0.0.1:9603"
    application = "default"
    region = "DEFAULT_ZONE"
    datacenter = "DefaultDataCenter"
    cluster = "default"
    group = "SEATA_GROUP"
    addressWaitTime = "3000"
  }
  file {
    name = "file.conf"
  }
}

config {
  # file、nacos 、apollo、zk、consul、etcd3，在这里使用文件存储
  type = "file"

  nacos {
    serverAddr = "localhost"
    namespace = ""
    group = "SEATA_GROUP"
  }
  consul {
    serverAddr = "127.0.0.1:8500"
  }
  apollo {
    app.id = "seata-server"
    apollo.meta = "http://192.168.1.204:8801"
    namespace = "application"
  }
  zk {
    serverAddr = "127.0.0.1:2181"
    session.timeout = 6000
    connect.timeout = 2000
  }
  etcd3 {
    serverAddr = "http://localhost:2379"
  }
  file {
    name = "file.conf"
  }
}

在bin下点击seata-server.bat启动：

再去eureka看是否有default服务注册上去

再看idea控制台：

已经没有报错信息了，表示成功。