FastDFS_5.0X 单机(Ubuntu12.04LTS)安装测试

一、软件包

libfastcommon    https://github.com/happyfish100/libfastcommon

FastDFS  https://github.com/happyfish100/fastdfs

二.安装部署

FastDFS依赖libfastcommon，所以先安装libfastcommon，后安装FastDFS

设置工作目录： /home/workspace/fastdfs

本机IP：192.168.1.112（不能用127.0.0.1）

1.安装libfastcommon

 ① 打开终端，切换到工作目录  /home/workspace/fastdfs

git clone https://github.com/happyfish100/libfastcommon

② cd libfastcommon

 ③ ./make.sh

     ./make.sh install

      cd ..

2.安装FastDFS

git https://github.com/happyfish100/fastdfs

cd fastdfs

./make.sh

./make.sh install

cd ..

3.配置fastdfs

cd /etc/fdfs

修改tracker.conf   starage.conf  client.conf 配置文件

① tracker.conf

# is this config file disabled
# false for enabled
# true for disabled
disabled=false


# bind an address of this host
# empty for bind all addresses of this host
bind_addr=


# the tracker server port
port=22122


# connect timeout in seconds
# default value is 30s
connect_timeout=30


# network timeout in seconds
# default value is 30s
network_timeout=60


# the base path to store data and log files
base_path=/home/workspace/fastdfs


# max concurrent connections this server supported
max_connections=256


# accept thread count
# default value is 1
# since V4.07
accept_threads=1


# work thread count, should <= max_connections
# default value is 4
# since V2.00
work_threads=4


# the method of selecting group to upload files
# 0: round robin
# 1: specify group
# 2: load balance, select the max free space group to upload file
store_lookup=2


# which group to upload file
# when store_lookup set to 1, must set store_group to the group name
store_group=group2


# which storage server to upload file
# 0: round robin (default)
# 1: the first server order by ip address
# 2: the first server order by priority (the minimal)
store_server=0


# which path(means disk or mount point) of the storage server to upload file
# 0: round robin
# 2: load balance, select the max free space path to upload file
store_path=0


# which storage server to download file
# 0: round robin (default)
# 1: the source storage server which the current file uploaded to
download_server=0


# reserved storage space for system or other applications.
# if the free(available) space of any stoarge server in 
# a group <= reserved_storage_space, 
# no file can be uploaded to this group.
# bytes unit can be one of follows:
### G or g for gigabyte(GB)
### M or m for megabyte(MB)
### K or k for kilobyte(KB)
### no unit for byte(B)
### XX.XX% as ratio such as reserved_storage_space = 10%
reserved_storage_space = 10%


#standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info


#unix group name to run this program, 
#not set (empty) means run by the group of current user
run_by_group=


#unix username to run this program,
#not set (empty) means run by current user
run_by_user=


# allow_hosts can ocur more than once, host can be hostname or ip address,
# "*" means match all ip addresses, can use range like this: 10.0.1.[1-15,20] or
# host[01-08,20-25].domain.com, for example:
# allow_hosts=10.0.1.[1-15,20]
# allow_hosts=host[01-08,20-25].domain.com
allow_hosts=*


# sync log buff to disk every interval seconds
# default value is 10 seconds
sync_log_buff_interval = 10


# check storage server alive interval seconds
check_active_interval = 120


# thread stack size, should >= 64KB
# default value is 64KB
thread_stack_size = 64KB


# auto adjust when the ip address of the storage server changed
# default value is true
storage_ip_changed_auto_adjust = true


# storage sync file max delay seconds
# default value is 86400 seconds (one day)
# since V2.00
storage_sync_file_max_delay = 86400


# the max time of storage sync a file
# default value is 300 seconds
# since V2.00
storage_sync_file_max_time = 300


# if use a trunk file to store several small files
# default value is false
# since V3.00
use_trunk_file = false 


# the min slot size, should <= 4KB
# default value is 256 bytes
# since V3.00
slot_min_size = 256


# the max slot size, should > slot_min_size
# store the upload file to trunk file when it's size <=  this value
# default value is 16MB
# since V3.00
slot_max_size = 16MB


# the trunk file size, should >= 4MB
# default value is 64MB
# since V3.00
trunk_file_size = 64MB


# if create trunk file advancely
# default value is false
# since V3.06
trunk_create_file_advance = false


# the time base to create trunk file
# the time format: HH:MM
# default value is 02:00
# since V3.06
trunk_create_file_time_base = 02:00


# the interval of create trunk file, unit: second
# default value is 38400 (one day)
# since V3.06
trunk_create_file_interval = 86400


# the threshold to create trunk file
# when the free trunk file size less than the threshold, will create 
# the trunk files
# default value is 0
# since V3.06
trunk_create_file_space_threshold = 20G


# if check trunk space occupying when loading trunk free spaces
# the occupied spaces will be ignored
# default value is false
# since V3.09
# NOTICE: set this parameter to true will slow the loading of trunk spaces 
# when startup. you should set this parameter to true when neccessary.
trunk_init_check_occupying = false


# if ignore storage_trunk.dat, reload from trunk binlog
# default value is false
# since V3.10
# set to true once for version upgrade when your version less than V3.10
trunk_init_reload_from_binlog = false


# the min interval for compressing the trunk binlog file
# unit: second
# default value is 0, 0 means never compress
# FastDFS compress the trunk binlog when trunk init and trunk destroy
# recommand to set this parameter to 86400 (one day)
# since V5.01
trunk_compress_binlog_min_interval = 0


# if use storage ID instead of IP address
# default value is false
# since V4.00
use_storage_id = false


# specify storage ids filename, can use relative or absolute path
# since V4.00
storage_ids_filename = storage_ids.conf


# id type of the storage server in the filename, values are:
## ip: the ip address of the storage server
## id: the server id of the storage server
# this paramter is valid only when use_storage_id set to true
# default value is ip
# since V4.03
id_type_in_filename = ip


# if store slave file use symbol link
# default value is false
# since V4.01
store_slave_file_use_link = false


# if rotate the error log every day
# default value is false
# since V4.02
rotate_error_log = false


# rotate error log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.02
error_log_rotate_time=00:00


# rotate error log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_error_log_size = 0


# keep days of the log files
# 0 means do not delete old log files
# default value is 0
log_file_keep_days = 0


# if use connection pool
# default value is false
# since V4.05
use_connection_pool = false


# connections whose the idle time exceeds this time will be closed
# unit: second
# default value is 3600
# since V4.05
connection_pool_max_idle_time = 3600


# HTTP port on this tracker server
http.server_port=8080


# check storage HTTP server alive interval seconds
# <= 0 for never check
# default value is 30
http.check_alive_interval=30


# check storage HTTP server alive type, values are:
#   tcp : connect to the storge server with HTTP port only, 
#        do not request and get response
#   http: storage check alive url must return http status 200
# default value is tcp
http.check_alive_type=tcp


# check storage HTTP server alive uri/url
# NOTE: storage embed HTTP server support uri: /status.html
http.check_alive_uri=/status.html

②storage.conf

# is this config file disabled
# false for enabled
# true for disabled
disabled=false


# the name of the group this storage server belongs to
#
# comment or remove this item for fetching from tracker server,
# in this case, use_storage_id must set to true in tracker.conf,
# and storage_ids.conf must be configed correctly.
group_name=group2


# bind an address of this host
# empty for bind all addresses of this host
bind_addr=


# if bind an address of this host when connect to other servers 
# (this storage server as a client)
# true for binding the address configed by above parameter: "bind_addr"
# false for binding any address of this host
client_bind=true


# the storage server port
port=23000


# connect timeout in seconds
# default value is 30s
connect_timeout=30


# network timeout in seconds
# default value is 30s
network_timeout=60


# heart beat interval in seconds
heart_beat_interval=30


# disk usage report interval in seconds
stat_report_interval=60


# the base path to store data and log files
base_path=/home/workspace/fastdfs


# max concurrent connections the server supported
# default value is 256
# more max_connections means more memory will be used
max_connections=256


# the buff size to recv / send data
# this parameter must more than 8KB
# default value is 64KB
# since V2.00
buff_size = 256KB


# accept thread count
# default value is 1
# since V4.07
accept_threads=1


# work thread count, should <= max_connections
# work thread deal network io
# default value is 4
# since V2.00
work_threads=4


# if disk read / write separated
##  false for mixed read and write
##  true for separated read and write
# default value is true
# since V2.00
disk_rw_separated = true


# disk reader thread count per store base path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_reader_threads = 1


# disk writer thread count per store base path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_writer_threads = 1


# when no entry to sync, try read binlog again after X milliseconds
# must > 0, default value is 200ms
sync_wait_msec=50


# after sync a file, usleep milliseconds
# 0 for sync successively (never call usleep)
sync_interval=0


# storage sync start time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_start_time=00:00


# storage sync end time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_end_time=23:59


# write to the mark file after sync N files
# default value is 500
write_mark_file_freq=500


# path(disk or mount point) count, default value is 1
store_path_count=1


# store_path#, based 0, if store_path0 not exists, it's value is base_path
# the paths must be exist
store_path0=/home/workspace/fastdfs
#store_path1=/home/yuqing/fastdfs2


# subdir_count  * subdir_count directories will be auto created under each 
# store_path (disk), value can be 1 to 256, default value is 256
subdir_count_per_path=256


# tracker_server can ocur more than once, and tracker_server format is
#  "host:port", host can be hostname or ip address
tracker_server=192.168.1.112:22122


#standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info


#unix group name to run this program, 
#not set (empty) means run by the group of current user
run_by_group=


#unix username to run this program,
#not set (empty) means run by current user
run_by_user=


# allow_hosts can ocur more than once, host can be hostname or ip address,
# "*" means match all ip addresses, can use range like this: 10.0.1.[1-15,20] or
# host[01-08,20-25].domain.com, for example:
# allow_hosts=10.0.1.[1-15,20]
# allow_hosts=host[01-08,20-25].domain.com
allow_hosts=*


# the mode of the files distributed to the data path
# 0: round robin(default)
# 1: random, distributted by hash code
file_distribute_path_mode=0


# valid when file_distribute_to_path is set to 0 (round robin), 
# when the written file count reaches this number, then rotate to next path
# default value is 100
file_distribute_rotate_count=100


# call fsync to disk when write big file
# 0: never call fsync
# other: call fsync when written bytes >= this bytes
# default value is 0 (never call fsync)
fsync_after_written_bytes=0


# sync log buff to disk every interval seconds
# must > 0, default value is 10 seconds
sync_log_buff_interval=10


# sync binlog buff / cache to disk every interval seconds
# default value is 60 seconds
sync_binlog_buff_interval=10


# sync storage stat info to disk every interval seconds
# default value is 300 seconds
sync_stat_file_interval=300


# thread stack size, should >= 512KB
# default value is 512KB
thread_stack_size=512KB


# the priority as a source server for uploading file.
# the lower this value, the higher its uploading priority.
# default value is 10
upload_priority=10


# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
# multi aliases split by comma. empty value means auto set by OS type
# default values is empty
if_alias_prefix=


# if check file duplicate, when set to true, use FastDHT to store file indexes
# 1 or yes: need check
# 0 or no: do not check
# default value is 0
check_file_duplicate=0


# file signature method for check file duplicate
## hash: four 32 bits hash code
## md5: MD5 signature
# default value is hash
# since V4.01
file_signature_method=hash


# namespace for storing file indexes (key-value pairs)
# this item must be set when check_file_duplicate is true / on
key_namespace=FastDFS


# set keep_alive to 1 to enable persistent connection with FastDHT servers
# default value is 0 (short connection)
keep_alive=0


# you can use "#include filename" (not include double quotes) directive to 
# load FastDHT server list, when the filename is a relative path such as 
# pure filename, the base path is the base path of current/this config file.
# must set FastDHT server list when check_file_duplicate is true / on
# please see INSTALL of FastDHT for detail
##include /home/yuqing/fastdht/conf/fdht_servers.conf


# if log to access log
# default value is false
# since V4.00
use_access_log = false


# if rotate the access log every day
# default value is false
# since V4.00
rotate_access_log = false


# rotate access log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.00
access_log_rotate_time=00:00


# if rotate the error log every day
# default value is false
# since V4.02
rotate_error_log = false


# rotate error log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.02
error_log_rotate_time=00:00


# rotate access log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_access_log_size = 0


# rotate error log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_error_log_size = 0


# keep days of the log files
# 0 means do not delete old log files
# default value is 0
log_file_keep_days = 0


# if skip the invalid record when sync file
# default value is false
# since V4.02
file_sync_skip_invalid_record=false


# if use connection pool
# default value is false
# since V4.05
use_connection_pool = false


# connections whose the idle time exceeds this time will be closed
# unit: second
# default value is 3600
# since V4.05
connection_pool_max_idle_time = 3600


# use the ip address of this storage server if domain_name is empty,
# else this domain name will ocur in the url redirected by the tracker server
http.domain_name=


# the port of the web server on this storage server
http.server_port=8888

③client.conf

# connect timeout in seconds
# default value is 30s
connect_timeout=30


# network timeout in seconds
# default value is 30s
network_timeout=60


# the base path to store log files
base_path=/home/workspace/fastdfs


# tracker_server can ocur more than once, and tracker_server format is
#  "host:port", host can be hostname or ip address
tracker_server=192.168.1.112:22122


#standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info


# if use connection pool
# default value is false
# since V4.05
use_connection_pool = false


# connections whose the idle time exceeds this time will be closed
# unit: second
# default value is 3600
# since V4.05
connection_pool_max_idle_time = 3600


# if load FastDFS parameters from tracker server
# since V4.05
# default value is false
load_fdfs_parameters_from_tracker=false


# if use storage ID instead of IP address
# same as tracker.conf
# valid only when load_fdfs_parameters_from_tracker is false
# default value is false
# since V4.05
use_storage_id = false


# specify storage ids filename, can use relative or absolute path
# same as tracker.conf
# valid only when load_fdfs_parameters_from_tracker is false
# since V4.05
storage_ids_filename = storage_ids.conf




#HTTP settings
http.tracker_server_port=8080


#use "#include" directive to include HTTP other settiongs
##include http.conf

三、启动fastdfs

fdfs_trackerd  tracker.conf

fdfs_storaged storage.conf

四、测试上传文件

fdfs_test client.conf uploadclient.conf

放几个Blog链接

http://blog.csdn.net/yecong111/article/details/42646523

http://blog.csdn.net/yecong111/article/details/42646523

http://dorole.com/1365/