m0_49462501的博客

原创 编程4

甲；#include<reg51.h>#define uint unsigned int#define uchar unsigned charsbit s1=P1^1;uchar a=0;void delay(uint z) //延时函数{uint x,y;for(x=100;x>0;x–)for(y=z;y>0;y–);}void key(){if(s10){delay(5);if(s10){while(!s1);

原创 编程序3

#include “reg52.h” //此文件中定义了单片机的一些特殊功能寄存器typedef unsigned int u16; //对数据类型进行声明定义typedef unsigned char u8;unsigned char code tab[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0xff,0x88};u8 num;void Int0Init(){//设置INT0IT0=1;//跳变沿出发方式（下降沿）

原创 编程2

原创 编程2

#include<reg52.h> //头文件#include<intrins.h> //头文件#define uint unsigned int //宏定义#define uchar unsigned char //宏定义uchar flag; //变量uchar count=0;uchar time=0;sbit key1=P1^0;uchar mode;void delay(uint z) //延时函数{uint x,

原创 编程序1

#include “reg52.h” //此文件中定义了单片机的一些特殊功能寄存器typedef unsigned int u16; //对数据类型进行声明定义typedef unsigned char u8;sbit led=P1^0; //定义P10口是ledvoid Timer0Init(){TMOD|=0X01;//选择为定时器0模式，工作方式1，仅用TR0打开启动。TH0=0XFC; //给定时器赋初值，定时1msTL0=0X18; ET0=1;//打开定时器0中断允

原创 单片机设计

单片机1:#include <reg51.h>sbit key1=P3^0;sbit key2=P3^4;unsigned char code tab[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e};unsigned char num=8;void delay_ms(unsigned char t){unsigned char x,y;for(x=t;x&gt