vlan综合实验

一、实验要求及拓扑

二、实验思路分析：
1、划分VLAN，由实验要求可知，PC1和PC3在VLAN2,PC2在VLAN3,PC4在vlan4和PC5在VLAN5，PC6在VLAN6，并且将接口设置为access
2、创建VLAN并修改接口模式，VLAN2的接口模式为access，其他VLAN接口模式为hybird，交换机相连的接口为trunk
3、修改VLAN允许列表，按实验要求允许相应VLAN通过
4、SW1的e0/0/1口为hybrid，VLAN2带标签，VLAN3/4/5/6不带标签通过
5、R1创建子接口给VLAN3/4/5/6使用，物理接口给VLAN2
三、实验步骤

SW1:
vlan batch 2 to 6               //创建vlan
#
interface GigabitEthernet0/0/1
port link-type access			//接口为修改模式
port default vlan 2				//接口划入vlan2
#
interface GigabitEthernet0/0/2
port hybrid pvid vlan 3
port hybrid untagged vlan 3 to 6	//修改允许列表，不贴vlan标签通过
#
interface GigabitEthernet0/0/3
port link-type trunk
port trunk allow-pass vlan 2 to 6	//允许vlan 2 3 4 5 6 通过
#
interface GigabitEthernet0/0/4
port hybrid tagged vlan 2			//vlan2贴标签
port hybrid untagged vlan 3 to 6

vlan batch 2 to 6
SW2:
interface GigabitEthernet0/0/1
 port link-type access
 port default vlan 2
#
interface GigabitEthernet0/0/2
 port hybrid pvid vlan 4
 port hybrid untagged vlan 3 to 5
#
interface GigabitEthernet0/0/3
 port link-type trunk
 port trunk allow-pass vlan 2 to 6
#
interface GigabitEthernet0/0/4
 port link-type trunk
 port trunk allow-pass vlan 2 to 6

SW3:
#
vlan batch 2 to 6
#
interface MEth0/0/1
#
interface GigabitEthernet0/0/1
 port hybrid pvid vlan 5
 port hybrid untagged vlan 3 to 5
#
interface GigabitEthernet0/0/2
 port hybrid pvid vlan 6
 port hybrid untagged vlan 3 6
#
interface GigabitEthernet0/0/3
 port link-type trunk
 port trunk allow-pass vlan 2 to 6
#

R1:
#
dhcp enable
#
ip pool dh
 gateway-list 192.168.1.1 
 network 192.168.1.0 mask 255.255.255.0 
#
ip pool b
 gateway-list 192.168.2.1 
 network 192.168.2.0 mask 255.255.255.0 
#
interface GigabitEthernet0/0/0
 ip address 192.168.2.1 255.255.255.0 
 dhcp select global
#
interface GigabitEthernet0/0/0.1
 dot1q termination vid 2
 ip address 192.168.1.1 255.255.255.0 
 arp broadcast enable
 dhcp select global
#

测试