HCIP---IPV6

[Huawei]sys r1
[r1]int lo0
[r1-LoopBack0]ip add 192.168.1.1 25
[r1-LoopBack0]int lo1
[r1-LoopBack1]ip add 192.168.1.129 25
[r1-LoopBack1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.0.1 30
May 14 2021 16:52:32-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]q
[r1]ip route-static 0.0.0.0 0 192.168.0.2

[r1]ping -a 192.168.1.1 192.168.2.1
PING 192.168.2.1: 56 data bytes, press CTRL_C to break
Reply from 192.168.2.1: bytes=56 Sequence=1 ttl=255 time=90 ms
Reply from 192.168.2.1: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 192.168.2.1: bytes=56 Sequence=3 ttl=255 time=20 ms
Reply from 192.168.2.1: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 192.168.2.1: bytes=56 Sequence=5 ttl=255 time=20 ms

— 192.168.2.1 ping statistics —
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/34/90 ms

[r1]ping 3.3.3.3
PING 3.3.3.3: 56 data bytes, press CTRL_C to break
Reply from 3.3.3.3: bytes=56 Sequence=1 ttl=254 time=30 ms
Reply from 3.3.3.3: bytes=56 Sequence=2 ttl=254 time=30 ms
Reply from 3.3.3.3: bytes=56 Sequence=3 ttl=254 time=30 ms
Reply from 3.3.3.3: bytes=56 Sequence=4 ttl=254 time=30 ms
Reply from 3.3.3.3: bytes=56 Sequence=5 ttl=254 time=20 ms

— 3.3.3.3 ping statistics —
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/28/30 ms
sys
Enter system view, return user view with Ctrl+Z.
[r1]ipv6
[r1]int lo0
[r1-LoopBack0]ipv6 enable
[r1-LoopBack0]ipv6 2002:1701:0101:0000::1/65
[r1-LoopBack0]int lo1
[r1-LoopBack1]ipv6 enable
[r1-LoopBack1]ipv6 add 2002:1701:0101:0000:8000::1/65
[r1-LoopBack1]int g0/0/0
[r1-GigabitEthernet0/0/0]ipv6 enable
[r1-GigabitEthernet0/0/0]ipv6 add 2002:1701:1::1/64
[r1]ripng
[r1-ripng-1]q
[r1]int lo0
[r1-LoopBack0]ripng 1 enable
[r1-LoopBack0]int lo1
[r1-LoopBack1]ripng 1 enable
[r1-LoopBack1]int g0/0/0
[r1-GigabitEthernet0/0/0]ripng 1 enable
[r1-GigabitEthernet0/0/0]q
[r1]display ipv6 routing-table protocol ripng
[r1]display ipv6 routing-table
Routing Table : Public
Destinations : 8 Routes : 8

Destination : ::1 PrefixLength : 128
NextHop : ::1 Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : InLoopBack0 Flags : D

Destination : 2002:1701:1:: PrefixLength : 64
NextHop : 2002:1701:1::1 Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : GigabitEthernet0/0/0 Flags : D

Destination : 2002:1701:1::1 PrefixLength : 128
NextHop : ::1 Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : GigabitEthernet0/0/0 Flags : D

Destination : 2002:1701:101:: PrefixLength : 65
NextHop : 2002:1701:101::1 Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : LoopBack0 Flags : D
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ripng summary-address 2002:1701:101::

sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r2
[r2]int g0/0/1
[r2-GigabitEthernet0/0/1]ip add 23.1.1.1 24
May 14 2021 16:32:45-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]q
[r2]ip route-static 0.0.0.0 0 23.1.1.2
[r2]ping 34.1.1.2
PING 34.1.1.2: 56 data bytes, press CTRL_C to break
Request time out
Reply