目录
1.题型及要求
2.拓扑
3.在sw1上的配置
3.1创建vlan
[sw1]vlan batch 2 to 6
[sw1]int e0/0/1
[sw1-Ethernet0/0/1]port link-type access
[sw1-Ethernet0/0/1]port default vlan 2
[sw1]int e0/0/3
[sw1-Ethernet0/0/3]port link-type access
[sw1-Ethernet0/0/3]port default vlan 2
3.2 pc2,4,5,6用hybird
[sw1]int e0/0/2
[sw1-Ethernet0/0/2]port hybrid pvid vlan 3
[sw1-Ethernet0/0/2]port hybrid untagged vlan 2 to 6
[sw1-Ethernet0/0/2]int e0/0/4
[sw1-Ethernet0/0/4]port hybrid pvid vlan 4
[sw1-Ethernet0/0/4]port hybrid untagged vlan 2 to 4
3.3在sw2上的配置
[sw2]int e0/0/1
[sw2-Ethernet0/0/1]port hybrid pvid vlan 5
[sw2-Ethernet0/0/1]port hybrid untagged vlan 2 3 5
[sw2-Ethernet0/0/1]int e0/0/2
[sw2-Ethernet0/0/2]port hybrid pvid vlan 6
[sw2-Ethernet0/0/2]port hybrid untagged vlan 2 3 6
3.4trunk
[sw1-Ethernet0/0/4]int e0/0/5
[sw1-Ethernet0/0/5]port hybrid tagged vlan 2 to 6
[sw1-Ethernet0/0/5]int e0/0/6
[sw1-Ethernet0/0/6]port hybrid tagged vlan 2
[sw1-Ethernet0/0/6]port hybrid untagged vlan 3 to 6
[sw2-Ethernet0/0/3]port hybrid tagged vlan 2 to 6
3.5DHCP
[r1]dhcp enable
[r1]ip pool v2
[r1-ip-pool-v2]network 192.168.1.0 mask 24
[r1-ip-pool-v2]gateway-list 192.168.1.250
[r1]ip pool v3to6
[r1-ip-pool-v3to6]network 192.168.2.0 mask 24
[r1-ip-pool-v3to6]gateway-list 192.168.2.250
vlan2加标签
[r1]int g0/0/0.1
[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[r1-GigabitEthernet0/0/0.1]ip add 192.168.1.250 24
[r1-GigabitEthernet0/0/0.1]arp broadcast enable
[r1-GigabitEthernet0/0/0.1]dhcp select global
vlan3到6不加标签
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.2.250 24
[r1-GigabitEthernet0/0/0]dhcp select global
4.演示
pc1/3能访问2456
pc4不能访问56