来源:https://github.com/MCUdude/MightyCore
注意事项:Arduino IDE v1.87 不支持,国产的usbasp,需要用arduino as isp 下载
An Arduino core for ATmega8535, ATmega16, ATmega32, ATmega164, ATmega324, ATmega644 and ATmega1284, all running a Optiboot. Most Arduino UNO compatible libraries will work with this core. If not, it’s fairly straight forward to port a library. This core requires at least Arduino IDE v1.6, where v1.8.7 or newer is recommended. If you’re into “generic” AVR programming, I’m happy to tell you that all relevant keywords are being highlighted by the IDE through a separate keywords file. Make sure to test the example files (File > Examples > AVR C code examples).
If you’re looking for a great development board for these DIP-40 microcontrollers, I got you covered! I’ve used the Arduino UNO for years, but felt like vital functionality was missing on the board. When designing this board I made sure all missing functionality was added. The board can be bought on my Tindie store.
Read more in the hardware section below.
针脚图:蓝色标识对应arduino脚