CherryTree安装使用文档

最新推荐文章于 2023-12-18 17:34:21 发布

不干就会被干

最新推荐文章于 2023-12-18 17:34:21 发布

阅读量1.4k

点赞数

文章标签： debian ubuntu linux

本文链接：https://blog.csdn.net/m0_56690636/article/details/123368282

版权

CherryTree是一款层级笔记应用，支持富文本和语法高亮，数据存储为XML或SQLite文件。本文档提供了在Debian、Ubuntu、Arch Linux、Gentoo、Fedora、Opensuse、MacOS和Windows上的安装和构建步骤，以及使用Visual Studio Code进行构建和调试的方法。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

CherryTree

A hierarchical note taking application, featuring rich text and syntax highlighting, storing data in a single XML or SQLite file.
The project home page is giuspen.com/cherrytree.

Links on used libraries

https://www.gtkmm.org/en/documentation.shtml
https://developer-old.gnome.org/gtkmm-tutorial/3.24/
https://developer-old.gnome.org/gtkmm/3.24/
https://developer-old.gnome.org/gtkmm/3.24/hierarchy.html

https://developer-old.gnome.org/gtksourceviewmm/stable/

https://developer-old.gnome.org/libxml+±tutorial/stable/
https://developer-old.gnome.org/libxml++/stable/

https://wiki.gnome.org/Projects/gspell
https://developer-old.gnome.org/gspell/stable/

Build/Debug with Visual Studio Code on Linux

https://code.visualstudio.com/docs/setup/linux
required installation of Extension “C/C++”

cd cherrytree
code .

Build with: Ctrl+Shift+B
Debug with: F5

Build/Debug with Visual Studio Code using a container

It is possible to use a container as a full-featured development environment from VS Code.
This works on any operating system that supports Docker.

Install the system requirements.
Open the project in VS Code.
(optional) Edit .devcontainer/devcontainer.json to set your DISPLAY environment variable and/or edit other settings.
It is also possible to run the container on a remote Docker host, see the comment at the end.
Run the Remote-Containers: Open Folder in Container… command.
See previous section for Build and Debug instructions.

To create a debian package

./build.sh deb

Building Cherrytree on Ubuntu

Install dependencies:

sudo apt install build-essential cmake ninja-build libgtkmm-3.0-dev libgtksourceviewmm-3.0-dev libxml++2.6-dev libsqlite3-dev gettext libgspell-1-dev libcurl4-openssl-dev libuchardet-dev libfmt-dev libspdlog-dev

Note: On Debian10 / Ubuntu 18.04 libfmt-dev and libspdlog-dev are not used since too old; bundled source code is built instead
Get cherrytree source, compile and run:

git clone https://github.com/giuspen/cherrytree.git
cd cherrytree
git submodule update --init
./build.sh
./build/cherrytree

Install documentation:

sudo apt install devhelp libgtkmm-3.0-doc libgtksourceviewmm-3.0-doc libglibmm-2.4-doc libpangomm-1.4-doc libxml++2.6-doc libgspell-1-doc

devhelp

xdg-open /usr/share/doc/libgtkmm-3.0-doc/reference/html/index.html
xdg-open /usr/share/doc/libgtksourceviewmm-3.0-doc/reference/html/index.html
xdg-open /usr/share/doc/libglibmm-2.4-doc/reference/html/index.html
xdg-open /usr/share/doc/libpangomm-1.4-doc/reference/html/index.html
xdg-open /usr/share/doc/libxml++2.6-doc/reference/html/index.html
xdg-open /usr/share/doc/libgspell-1-dev/html/index.html

Building Cherrytree on Arch

Install dependencies:

sudo pacman -S gtksourceviewmm libxml++2.6 gspell uchardet fmt spdlog

Get cherrytree source, compile and run:

git clone https://github.com/giuspen/cherrytree.git
cd cherrytree
git submodule update --init
./build.sh
./build/cherrytree

Building Cherrytree on Gentoo

Install dependencies:

sudo emerge --newuse gtkmm gtksourceviewmm glibmm pangomm gspell libxml2 sqlite curl uchardet libfmt spdlog

Get cherrytree source, compile and run:

git clone https://github.com/giuspen/cherrytree.git
cd cherrytree/
git submodule update --init
./build.sh
./build/cherrytree

Building Cherrytree on Fedora

Install dependencies:

sudo dnf install @development-tools gcc-c++ libtool autoconf gtkmm30-devel gtksourceviewmm3-devel libxml++-devel libsq3-devel gettext-devel gettext intltool libxml2 gspell-devel cmake ninja-build libcurl-devel uchardet-devel fmt spdlog-devel

Get cherrytree source, compile and run:

git clone https://github.com/giuspen/cherrytree.git
cd cherrytree
git submodule update --init
./build.sh
./build/cherrytree

(OPTIONAL) Download Documentation

sudo dnf install gtkmm30-doc gtksourceviewmm3-doc glibmm24-doc glibmm24-doc libxml++-doc

(OPTIONAL) Open Documentation

xdg-open /usr/share/doc/gtkmm-3.0/reference/html/index.html
xdg-open /usr/share/doc/gtksourceviewmm-3.0/reference/html/index.html
xdg-open /usr/share/doc/glibmm-2.4/reference/html/index.html
xdg-open /usr/share/doc/pangomm-1.4/reference/html/index.html
xdg-open /usr/share/doc/libxml++2.6/reference/html/index.html

Building Cherrytree on Opensuse

Install dependencies:

sudo zypper install cmake ninja gcc-c++ gtkmm3-devel gtksourceviewmm3_0-devel gspell-devel libxml++26-devel sqlite3-devel libcurl-devel libuchardet-devel fmt spdlog-devel

Get cherrytree source, compile and run:

git clone https://github.com/giuspen/cherrytree.git
cd cherrytree
git submodule update --init
./build.sh
./build/cherrytree

Building Cherrytree on MacOS

Cherrytree is now part of Homebrew!

brew update
brew install cherrytree

If for any reason you prefer to build it yourself, install dependencies:

brew install cmake ninja pkg-config python3 adwaita-icon-theme fmt gspell gtksourceviewmm3 libxml++ spdlog uchardet curl

Get cherrytree source, compile and run:

git clone https://github.com/giuspen/cherrytree.git
cd cherrytree
git submodule update --init
./build.sh
./build/cherrytree

Building Cherrytree on Windows

Install MSYS2: https://www.msys2.org/ (we cover here the packages for 64 bit installation)

Launch ‘MSYS2 MinGW 64-bit’ terminal (there are 3 different terminals, make sure it is 64-bit otherwise it will cause issues)

Run the following command multiple times there until there are no more updates:

pacman -Syuu

Install required packages to build cherrytree:

# toolchain, cmake, ninja
pacman -S --needed --noconfirm mingw-w64-x86_64-toolchain mingw-w64-x86_64-cmake mingw-w64-x86_64-ninja
# gtkmm3, gtksourceviewmm3, libxml++2.6, sqlite3
pacman -S --needed --noconfirm mingw-w64-x86_64-gtkmm3 mingw-w64-x86_64-gtksourceviewmm3 mingw-w64-x86_64-libxml++2.6 mingw-w64-x86_64-sqlite3
# gspell, curl, uchardet, fmt, spdlog
pacman -S --needed --noconfirm mingw-w64-x86_64-gspell mingw-w64-x86_64-curl mingw-w64-x86_64-uchardet mingw-w64-x86_64-fmt mingw-w64-x86_64-spdlog
# gettext, git, nano, meld3
pacman -S --needed --noconfirm mingw-w64-x86_64-gettext git nano mingw-w64-x86_64-meld3

use native windows theme

mkdir /etc/gtk-3.0
nano /etc/gtk-3.0/settings.ini

[Settings]
gtk-theme-name=win32

console settings

nano ~/.bashrc

CHERRYTREE_CONFIG_FOLDER="C:/Users/${USER}/AppData/Local/cherrytree"
[ -d ${CHERRYTREE_CONFIG_FOLDER} ] || mkdir -p ${CHERRYTREE_CONFIG_FOLDER}
alias l="ls -lah --color"
alias g=git
bind '"\e[A":history-search-backward'
bind '"\e[B":history-search-forward'

Get cherrytree source, compile and run:

git clone https://github.com/giuspen/cherrytree.git
cd cherrytree
git submodule update --init
./build.sh
./build/cherrytree.exe

Troubleshooting:

Cannot build: make sure to start 64-bit terminal
Cannot build: remove cherrytree/build folder and start build.sh script again
Cannot start cherrytree: you either have to run cherrytree from the msys2 mingw64 terminal or copy and replace cherrytree in cherrytree_0.99.X_win64_portable folder (downloaded from the site) by the new one, so dependencies are fulfilled