CentOS7 yum安装其他服务失败解决方法

        今天建了个虚机，准备装个vim，但yum安装始终失败，提示 

Loaded plugins: fastestmirror
Determining fastest mirrors
Could not retrieve mirrorlist http://mirrorlist.centos.org/？release=7&arch=x86_64&repo=os&infra=genclo error was
14: curl#7 - "Failed to connect to 2600:1f16:c1:5e01:4180:6610:5482:c1c0: Network is unreachable"


 One of the configured repositories failed (Unknown),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=<repoid> ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable <repoid>
        or
            subscription-manager repos --disable=<repoid>

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

Cannot find a valid baseurl for repo: base/7/x86_64

1.首先我的DNS配置都没问题，也能ping通百度，所以如果你ping不通的话先搜一下怎么修改网络

2.网上大部分方法我都试过，更换yum源我之前换成阿里云的还是不行

下面是我的解决方法：

1.在home目录中创建wget目录

mkdir /home/wget

2.在windows上下载wget安装包并用ftp放在刚刚创建的wget文件夹下

http://mirrors.163.com/centos/7/os/x86_64/Packages/

（直接用“ctrl+f”搜索“wget”）

3.回到CentOS检查一下安装包是否已经一过来了

[root@kydrewld wget]# ls /home/wget
wget-1.14-18.el7_6.1.x86_64.rpm

    已经过来了

4.安装wget

rpm -ivh wget-1.14-18.el7_6.1.x86_64.rpm

5.安装好后，先备份yum配置

mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup

6.更新yum源，我之前用了阿里云、腾讯云、清华云都不行，这次用华为云丝滑解决

wget -O /etc/yum.repos.d/CentOS-Base.repo https://repo.huaweicloud.com/repository/conf/CentOS-7-reg.repo

7.等待安装完毕，接着生成yum缓存

yum clean all & yum makecache

8.成功后查看当前yum源

yum repolist

非常完美，安装vim也十分丝滑

希望对你有帮助！！