华三交换机堆叠配置命令

主交换配置：

[H3C-1]irf domain 0     ###同一拓扑内如果有其他堆叠组，domain不能重复

[H3C-1]irf member 1 priority 20   ###优先级大的为主交换，其余为备，默认值为1

[H3C-1]interface range Ten-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/50

[H3C-1-if-range]shutdown

[H3C-1]irf-port 1/1

[H3C-1-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/49

[H3C-1-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/50

[H3C-1]interface range Ten-GigabitEthernet 1/0/49 to Ten-GigabitEthernet 1/0/50
[H3C-1-if-range]undo shutdown
<H3C-1>sa
备交换配置

[H3C-2]irf domain 0
[H3C-2]irf member 1 renumber 2   ###对接口板卡进行修改
Renumbering the member ID may result in configuration change or loss. Continue?[Y/N]:y
Please reboot the device for the new member ID to take effect.

<H3C-2>sa   ###重启前保存配置
<H3C-2>reboot   ###接口由1/0/1变成2/0/1

[H3C-2]irf member 2 priority 10   ###默认为1，越大越优先

[H3C-2]interface range Ten-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/50
[H3C-2-if-range]shutdown
[H3C-2]irf-port 2/2
[H3C-2-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/49
[H3C-2-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/50

[H3C-2]interface range Ten-GigabitEthernet 2/0/49 to Ten-GigabitEthernet 2/0/50
[H3C-2-if-range]undo shutdown

注意：执行下列操作前保存配置，堆叠线如果连接备机重启，未连接，连接后备机重启。

[H3C-1]irf-port-configuration active
[H3C-2]irf-port-configuration active