VLAN划分实验

最新推荐文章于 2024-07-13 14:16:36 发布

大猫吃小猫

最新推荐文章于 2024-07-13 14:16:36 发布

阅读量78

点赞数

文章标签：网络

本文链接：https://blog.csdn.net/m0_59520765/article/details/126098594

版权

配置了三个交换机SW1、SW2和SW3的端口VLAN，实现不同端口的数据隔离。其中，SW1配置了接入、混合和中继端口，SW2和SW3配置了混合端口并指定允许的VLAN。路由器AR1配置了两个VLAN子接口，用于分配DHCP地址。PC2可以访问PC4/5/6，但PC4能访问PC5而不能访问PC6，确保了特定的网络访问权限。所有PC通过DHCP获取IP地址，PC1/3能够正常访问PC2/4/5/6。

摘要由CSDN通过智能技术生成

1.划分VLAN

2.配置

SW1

[SW1]int g 0/0/1
[SW1-GigabitEthernet0/0/1]port link-type access 	
[SW1-GigabitEthernet0/0/1]port default vlan 2
[SW1-GigabitEthernet0/0/1]int g 0/0/2
[SW1-GigabitEthernet0/0/2]port link-type hybrid 
[SW1-GigabitEthernet0/0/2]port hybrid untagged vlan 3 4 5 6
[SW1-GigabitEthernet0/0/2]int g 0/0/3
[SW1-GigabitEthernet0/0/3]port link-type  trunk 
[SW1-GigabitEthernet0/0/3]port trunk allow-pass vlan all
[SW1-GigabitEthernet0/0/3]int g 0/0/4
[SW1-GigabitEthernet0/0/4]p l h
[SW1-GigabitEthernet0/0/4]port hybrid tagged vlan 2
[SW1-GigabitEthernet0/0/4]port hybrid untagged vlan 3 4 5 6
[SW1-GigabitEthernet0/0/4] User interface con0 is available

SW2

[SW2]int g 0/0/1
[SW2-GigabitEthernet0/0/1]p l a
[SW2-GigabitEthernet0/0/1]p d v 2

[SW2-GigabitEthernet0/0/1]int g 0/0/2
[SW2-GigabitEthernet0/0/2]p l h
[SW2-GigabitEthernet0/0/2]p h p v 4

[SW2-GigabitEthernet0/0/2]p h u v 3 4 5
[SW2-GigabitEthernet0/0/2]int g 0/0/3
[SW2-GigabitEthernet0/0/3]p l t
[SW2-GigabitEthernet0/0/3]p t a

[SW2-GigabitEthernet0/0/3]int g 0/0/4
[SW2-GigabitEthernet0/0/4]p l t
[SW2-GigabitEthernet0/0/4]p t a v a

SW3

[SW3]int g 0/0/1
[SW3-GigabitEthernet0/0/1]p l h
[SW3-GigabitEthernet0/0/1]p h p v 5
[SW3-GigabitEthernet0/0/1]p h u v 3 4 5
[SW3-GigabitEthernet0/0/1]int g 0/0/2
[SW3-GigabitEthernet0/0/2]p l h
[SW3-GigabitEthernet0/0/2]p h p v 6
[SW3-GigabitEthernet0/0/2]p h u v 3 6
[SW3-GigabitEthernet0/0/2]int g 0/0/3
[SW3-GigabitEthernet0/0/3]p l t
[SW3-GigabitEthernet0/0/3]p t a v a
[SW3-GigabitEthernet0/0/3]q

AR1

[r1]int g 0/0/0.1
[r1-GigabitEthernet0/0/0.1]ip add 192.168.1.1 24
[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[r1-GigabitEthernet0/0/0.1]arp broadcast enable 
[r1-GigabitEthernet0/0/0.1]q

[r1]int g 0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.2.1 24 
[r1-GigabitEthernet0/0/0]q

[r1]dhcp enable 

[r1]ip pool aa
[r1-ip-pool-aa]network 192.168.1.0 mask 24
[r1-ip-pool-aa]gateway-list 192.168.1.1
[r1-ip-pool-aa]dns-list 114.114.114.114
[r1-ip-pool-aa]q

[r1]ip pool bb
[r1-ip-pool-bb]network 192.168.2.0 mask 24
[r1-ip-pool-bb]gateway-list 192.168.2.1
[r1-ip-pool-bb]dns-list 114.114.114.114
[r1-ip-pool-bb]q

[r1]int g 0/0/0.1
[r1-GigabitEthernet0/0/0.1]dhcp select global 

[r1-GigabitEthernet0/0/0.1]int g 0/0/0
[r1-GigabitEthernet0/0/0]dhcp select global 
[r1-GigabitEthernet0/0/0]q