本文详细描述了两个核心交换机（core1和core2）对VLAN10、20和30的配置，涉及IP地址、优先级、抢占和跟踪功能，以及路由器端口配置和备份路由的设置。
交换机备份设置
switch--core1:
int vlan 10
stan 10 ip 10.1.1.254
stan 10 prior 200
stan 10 preempt
stan 10 track f0/3
exit
int vlan 20
stan 20 ip 20.1.1.254
stan 20 prior 200
stan 20 preempt
stan 20 track f0/3
exit
int vlan 30
stan 30 ip 30.1.1.254
stan 30 prior 200
stan 30 preempt
exit
switch--core2:
int vlan 10
stan 10 ip 10.1.1.254
stan 10 prior 195
stan 10 preempt
exit
int vlan 20
stan 20 ip 20.1.1.254
stan 20 prior 195
stan 20 preempt
exit
int vlan 30
stan 30 ip 30.1.1.254
stan 30 prior 195
stan 30 preempt
stan 30 track f0/4
exit
do sh stan br //展示热接口状态
交换机端口f0/3
int f0/3
no sw
ip add 50.1.1.1 255.255.255.0
no sh
exit
路由器端口配置地址
int f0/1
ip add 60.1.1.1 255.255.255.0
no sh
exit
配路由
ip route 10.1.1.0 255.255.255.0 40.1.1.1
ip route 10.1.1.0 255.255.255.0 40.1.1.1 2 //备份路由
do sh ip route //查看路由表
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
