R3配置
[Huawei]sys r3
[r3]int s 4/0/0
[r3-Serial4/0/0]ip address 34.0.0.1 24
[r3-Serial4/0/0]q
[r3]ip route-static 0.0.0.0 0 34.0.0.2
ISP配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys isp
[isp]int s 4/0/0
[isp-Serial4/0/0]ip address 34.0.0.2 24
[isp-Serial4/0/0]
Nov 10 2023 22:57:36-08:00 isp %%01IFNET/4/LINK_STATE(l)[0]:The line protocol PP
P IPCP on the interface Serial4/0/0 has entered the UP state.
[isp-Serial4/0/0]int s 4/0/1
[isp-Serial4/0/1]ip address 45.0.0.2 24
[isp-Serial4/0/1]int s 3/0/0
[isp-Serial3/0/0]ip address 46.0.0.2 24
[isp-Serial3/0/0]int g 0/0/0
[isp-GigabitEthernet0/0/0]ip address 47.0.0.2 24
Nov 10 2023 22:58:54-08:00 isp %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[isp]int l 0
[isp-LoopBack0]ip address 4.4.4.4 24
[isp-LoopBack0]q
[isp]q
<isp>save
R5配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r5
[r5]int s 4/0/0
[r5-Serial4/0/0]ip address 45.0.0.1 24
[r5-Serial4/0/0]
Nov 10 2023 23:01:48-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol PPP
IPCP on the interface Serial4/0/0 has entered the UP state.
[r5-Serial4/0/0]int l 0
[r5-LoopBack0]ip address 172.16.2.1 24
[r5-LoopBack0]q
[r5]ip route-static 0.0.0.0 0 45.0.0.2
R6配置
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r6
[r6]int s 4/0/0
[r6-Serial4/0/0]ip address 46.0.0.1 24
[r6-Serial4/0/0]
Nov 10 2023 23:06:18-08:00 r6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol PPP
IPCP on the interface Serial4/0/0 has entered the UP state.
[r6-Serial4/0/0]int l 0
[r6-LoopBack0]ip address 172.16.3.1 24
[r6-LoopBack0]q
[r6]ip route-static 0.0.0.0 0 46.0.0.2
R7配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r7
[r7]int g 0/0/0
[r7-GigabitEthernet0/0/0]ip address 47.0.0.1 24
Nov 10 2023 23:10:36-08:00 r7 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r7-GigabitEthernet0/0/0]int l 0
[r7-LoopBack0]ip address 172.16.4.1 24
[r7-LoopBack0]q
[r7]ip route-static 0.0.0.0 0 47.0.0.2
2,R3-R5/6/7为MGRE环境,R3为中心站点;
R3配置
[r3]int t 0/0/0
[r3-Tunnel0/0/0]ip address 172.16.1.1 24
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp
[r3-Tunnel0/0/0]source 34.0.0.1
Nov 10 2023 23:16:53-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface Tunnel0/0/0 has entered the UP state.
[r3-Tunnel0/0/0]nhrp network-id 100
[r3-Tunnel0/0/0]nhrp entry multicast dynamic
R5配置
[r5]int tun 0/0/0
[r5-Tunnel0/0/0]ip address 172.16.1.2 24
[r5-Tunnel0/0/0]tunnel-protocol gre p2mp
[r5-Tunnel0/0/0]source Serial 4/0/0
Nov 10 2023 23:19:12-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface Tunnel0/0/0 has entered the UP state.
[r5-Tunnel0/0/0]nhrp network-id 100
[r5-Tunnel0/0/0]nhrp entry 172.16.1.1 34.0.0.1 register
R6配置
[r6]int t 0/0/0
[r6-Tunnel0/0/0]ip address 172.16.1.3 24
[r6-Tunnel0/0/0]tunnel-protocol gre p2mp
[r6-Tunnel0/0/0]source Serial 4/0/0
Nov 10 2023 23:22:26-08:00 r6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface Tunnel0/0/0 has entered the UP state.
[r6-Tunnel0/0/0]nhrp network-id 100
[r6-Tunnel0/0/0]nhrp entry 172.16.1.1 34.0.0.1 register
R7配置
[r7-Tunnel0/0/0]display this
[V200R003C00]
#
interface Tunnel0/0/0
ip address 172.16.1.4 255.255.255.0
tunnel-protocol gre p2mp
source GigabitEthernet0/0/0
nhrp network-id 100
nhrp entry 172.16.1.1 34.0.0.1 register
#
return
3,整个OSPF环境IP基于172.16.0.0/16划分;
172.16.0.0/16
area 0
172.16.0.0/19
r3-r4
---34.0.0.0/24
r5-r4
---45.0.0.0/24
r6-r4
---46.0.0.0/24
r7-r4
---47.0.0.0/24
r5环回
---172.16.2.0/24
r6环回
---172.16.3.0/24
r7环回
---172.16.4.0/24
MGRE隧道
---172.16.1.0/24
area 1
172.16.32.0/19
主干
---172.16.33.0/24
r1环回
---172.16.34.0/24
r2环回
---172.16.35.0/24
r3环回
---172.16.36.0/24
area 2
172.16.64.0/19
r6-r11
---172.16.65.0/24
r11-r12
---172.16.66.0/24
r11环回
---172.16.67.0/24
area 3
172.16.96.0/19
r7-r8
---172.16.97.0/24
r8-r9
---172.16.98.0/24
r8环回
---172.16.99.0/24
area 4
172.16.128.0/19
r9-r10
---172.16.129.0/24
r8环回
---172.16.130.0/24
r8环回
---172.16.131.0/24
RIP
172.16.160.0/19
r12环回0
---172.16.160.0/20
r12环回1
---172.16.176.0/20
R1配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r1
[r1]int g 0/0/0
[r1-GigabitEthernet0/0/0]ip address 172.168.33.1 24
Nov 10 2023 23:37:04-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]int l 0
[r1-LoopBack0]ip address 172.16.34.1 24
R2配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r2
[r2]int g 0/0/0
[r2-GigabitEthernet0/0/0]ip address 172.16.33.2 24
[r2]int l 0
[r2-LoopBack0]ip address 172.16.35.1 24
R3配置
[r3]int g 0/0/0
[r3-GigabitEthernet0/0/0]ip address 172.16.33.3 24
Nov 10 2023 23:49:15-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r3-GigabitEthernet0/0/0]int l 0
[r3-LoopBack0]ip address 172.16.36.1 24
R6配置
<r6>sys
Enter system view, return user view with Ctrl+Z.
[r6]int g 0/0/0
[r6-GigabitEthernet0/0/0]ip address 172.16.65.1 24
Nov 11 2023 12:51:13-08:00 r6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
R11配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r11
[r11]int g 0/0/0
[r11-GigabitEthernet0/0/0]ip address 172.16.65.2 24
Nov 11 2023 12:52:30-08:00 r11 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r11-GigabitEthernet0/0/0]int g 0/0/1
[r11-GigabitEthernet0/0/1]ip address 172.16.66.1 24
Nov 11 2023 12:53:15-08:00 r11 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r11-GigabitEthernet0/0/1]int l 0
[r11-LoopBack0]ip address 172.16.67.1 24
R12配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r12
[r12]int g 0/0/0
[r12-GigabitEthernet0/0/0]ip address 172.16.66.2 24
Nov 11 2023 12:56:28-08:00 r12 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r12-GigabitEthernet0/0/0]int l 0
[r12-LoopBack0]ip address 172.16.160.1 20
[r12-LoopBack0]int l 1
[r12-LoopBack1]ip address 172.16.176.1 20
R7配置
[r7]int g 0/0/1
[r7-GigabitEthernet0/0/1]ip address 172.16.97.1 24
R8配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r8
[r8]int g 0/0/0
[r8-GigabitEthernet0/0/0]ip address 172.16.97.2 24
Nov 11 2023 13:07:53-08:00 r8 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r8-GigabitEthernet0/0/0]int g 0/0/1
[r8-GigabitEthernet0/0/1]ip address 172.16.98.1 24
Nov 11 2023 13:08:20-08:00 r8 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r8-GigabitEthernet0/0/1]int l 0
[r8-LoopBack0]ip address 172.16.99.1 24
R9配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r9
[r9]int g 0/0/0
[r9-GigabitEthernet0/0/0]ip address 172.16.98.2 24
Nov 11 2023 13:11:11-08:00 r9 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
R9配置
[r9-GigabitEthernet0/0/0]int g 0/0/1
[r9-GigabitEthernet0/0/1]ip address 172.16.129.1 24
[r9-GigabitEthernet0/0/1]
Nov 11 2023 13:13:52-08:00 r9 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r9-GigabitEthernet0/0/1]int l 0
[r9-LoopBack0]ip address 172.16.130.1 24
R10配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r10
[r10]int g 0/0/0
[r10-GigabitEthernet0/0/0]ip address 172.16.129.2 24
Nov 11 2023 13:15:33-08:00 r10 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r10-GigabitEthernet0/0/0]int l 0
[r10-LoopBack0]ip address 172.16.131.2 24
4,所有设备均可访问R4的环回;
[r3]acl 2000
[r3-acl-basic-2000]rule permit source 172.16.0.0 0.0.255.255
[r3-acl-basic-2000]q
[r3]int s 4/0/0
[r3-Serial4/0/0]nat out
[r3-Serial4/0/0]nat outbound 2000
[r5]acl 2000
[r5-acl-basic-2000]rul
[r5-acl-basic-2000]rule permit source 172.16.0.0 0.0.255.255
[r5-acl-basic-2000]int s 4/0/0
[r5-Serial4/0/0]nat outbound 2000
[r6]acl 2000
[r6-acl-basic-2000]rule permit source 172.16.0.0 0.0.255.255
[r6-acl-basic-2000]q
[r6]int s 4/0/0
[r6-Serial4/0/0]nat outbound 2000
[r7]acl 2000
[r7-acl-basic-2000]rule permit source 172.16.0.0 0.0.255.255
[r7-acl-basic-2000]q
[r7]int g 0/0/0
[r7-GigabitEthernet0/0/0]nat o
[r7-GigabitEthernet0/0/0]nat outbound 2000