MGRE大实验

一.配置IP地址

配置玩后检查结果

二。配置R1/2/3MGRE，R1为中心站点

R1
[r1]int Tunnel 0/0/0
[r1-Tunnel0/0/0]ip add 192.168.7.1 24
[r1-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r1-Tunnel0/0/0]source 16.0.0.1
Sep 18 2022 18:43:45-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[r1-Tunnel0/0/0]nhrp network-id 100
————————————————

R2                          
[r2]int t0/0/0
[r2-Tunnel0/0/0]ip add 192.168.7.2 24	
[r2-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r2-Tunnel0/0/0]source GigabitEthernet 0/0/0
Sep 18 2022 18:44:47-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 	
[r2-Tunnel0/0/0]nhrp network-id 100
[r2-Tunnel0/0/0]nhrp entry 192.168.7.1 16.0.0.1 register 

R3
[r3]int t0/0/0
[r3-Tunnel0/0/0]ip add 192.168.7.3 24
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp 
[r3-Tunnel0/0/0]source GigabitEthernet 0/0/0
Sep 18 2022 18:46:16-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[r3-Tunnel0/0/0]nhrp network-id 100
[r3-Tunnel0/0/0]nhrp entry 192.168.7.1 16.0.0.1 register 
————————————————

                            版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
                        
原文链接：https://blog.csdn.net/weixin_64051859/article/details/126920915

三。配置R1/4/5MGRE

R1为中心

[r1]int t0/0/1
[r1-Tunnel0/0/1]ip add 192.168.8.1 24
[r1-Tunnel0/0/1]tunnel-protocol gre p2mp
[r1-Tunnel0/0/1]source 61.0.0.1
Sep 18 2022 19:00:23-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/1 has entered the UP state. 	
[r1-Tunnel0/0/1]nhrp network-id 200
————————————————

[r4]int t0/0/1
[r4-Tunnel0/0/1]ip add 192.168.8.2 24
[r4-Tunnel0/0/1]tunnel-protocol gre p2mp
[r4-Tunnel0/0/1]source g0/0/0
Sep 18 2022 19:02:34-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/1 has entered the UP state. 
[r4-Tunnel0/0/1]nhrp network-id 200
[r4-Tunnel0/0/1]nhrp entry 192.168.8.1 61.0.0.1 register
————————————————

[r5]int t0/0/1
[r5-Tunnel0/0/1]ip add 192.168.8.3 24	
[r5-Tunnel0/0/1]tunnel-protocol gre p2mp 
[r5-Tunnel0/0/1]source g0/0/0
Sep 18 2022 19:03:48-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/1 has entered the UP state. 
[r5-Tunnel0/0/1]nhrp network-id 200
[r5-Tunnel0/0/1]nhrp entry 192.168.8.1 61.0.0.1 register
————————————————

                            版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
                        
原文链接：https://blog.csdn.net/weixin_64051859/article/details/126920915                            

R4为中心

[r4-Tunnel0/0/1]source 46.0.0.1
[r4-Tunnel0/0/1]nhrp network-id 400

[r1-Tunnel0/0/1]source g0/0/0
[r1-Tunnel0/0/1]nhrp network-id 400
[r1-Tunnel0/0/1]nhrp entry 192.168.8.2 46.0.0.1 register

[r5-Tunnel0/0/1]source g0/0/0
[r5-Tunnel0/0/1]nhrp network-id 400
[r5-Tunnel0/0/1]nhrp entry 192.168.8.2 46.0.0.1 register

R5为中心

[r5-Tunnel0/0/1]source 56.0.0.1
[r5-Tunnel0/0/1]nhrp network-id 500

[r1-Tunnel0/0/1]nhrp network-id 500	
[r1-Tunnel0/0/1]nhrp entry 192.168.8.3 56.0.0.1 register

[r4-Tunnel0/0/1]nhrp network-id 500
[r4-Tunnel0/0/1]nhrp entry 192.168.8.3 56.0.0.1 register

四。使用OSPF使全网可通

[r1-Tunnel0/0/0]nhrp entry multicast dynamic

ospf network-type broadcast