RIP实验

要求

 1.路由器上分别配置环回

 2.连接路由器的线路网段为12.1.1.0/ 24 、23.1.1.0/24

 3.R1和R3连接的网络地址分别为192.168.1.0/24、192.168.2.0/24

 4.整个网络使用RIP达到全网可达

实验过程

[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip ad 
[r1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
Aug 15 2022 20:27:59-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r1-GigabitEthernet0/0/0]int g0/0/1
[r1-GigabitEthernet0/0/1]ip ad 
[r1-GigabitEthernet0/0/1]ip address 12.1.1.1 24
Aug 15 2022 20:28:18-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r1-GigabitEthernet0/0/1]q
[r1]int l 0
[r1-LoopBack0]ip ad 
[r1-LoopBack0]ip address 1.1.1.1 32
[r1-LoopBack0]rip 1
[r1-rip-1]version 1
[r1-rip-1]network 12.0.0.0
[r1-rip-1]
[r1-rip-1]network 192.168.1.0

 [r2]int g0/0/0
[r2-GigabitEthernet0/0/0]ip ad 
[r2-GigabitEthernet0/0/0]ip address 12.1.1.2 24
Aug 15 2022 20:29:58-08:00 r2 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]ip ad 
[r2-GigabitEthernet0/0/1]ip address 23.1.1.1 24
Aug 15 2022 20:30:13-08:00 r2 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r2-GigabitEthernet0/0/1]q
[r2]int l 0
[r2-LoopBack0]ip ad 
[r2-LoopBack0]ip address 2.2.2.2 32
[r2-LoopBack0]q
[r2]rip 1
[r2-rip-1]version 1
[r2-rip-1]network 12.0.0.0
[r2-rip-1]network 23.0.0.0

 [r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip ad 
[r3-GigabitEthernet0/0/0]ip address 23.1.1.2 24
Aug 15 2022 20:32:11-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip ad 
[r3-GigabitEthernet0/0/1]ip address 192.168.2.1 24
Aug 15 2022 20:32:40-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r3-GigabitEthernet0/0/1]q
[r3]int l 0
[r3-LoopBack0]ip ad 
[r3-LoopBack0]ip address 3.3.3.3 32
[r3-LoopBack0] 
[r3-LoopBack0]
[r3-LoopBack0]q
[r3]rip 1
[r3-rip-1]version 1
[r3-rip-1]network 23.0.0.0
[r3-rip-1]network 192.168.2.0

ping连接检查