首先要分配IP地址
接口使用192.168.1.0/30
再给每个接口配置IP地址,配置环路IP地址
[rl]interface LoopBack 0
rl-LoopBacko]ip address 192.168.1.65 27
rl]interface LoopBack 1
rl-LoopBackl]ip address 192.168.1.97 27
随后进行RIP配置
[R1]rip 1
[R1-rip-1]version 2
[R1-rip-1]network 192.168.1.0
r1,r2配置空接口
[r1]ip route-static192.168.1.64 27
给r3进行缺省路由
[r3-rip-1]default-route originate
加快收敛速度
[rl-rip-1]timers rip 15 90 150