【k8s记录】二进制安装kubernetes高可用集群全过程完整版 v1.20

最新推荐文章于 2024-07-31 23:10:51 发布

安逸的程序猿

最新推荐文章于 2024-07-31 23:10:51 发布

阅读量1.1k

点赞数 2

分类专栏：云原生记录系列文章标签： k8s安装

本文链接：https://blog.csdn.net/ma726518972/article/details/115025198

版权

云原生记录系列专栏收录该内容

20 篇文章 2 订阅

订阅专栏

1.总体规划

1.1 服务器规划配置如下（master节点不安装kubelet）

IP地址	主机名	节点角色	安装组件
192.168.1.180	master1	master，IP入口	kube-apiserver、kube-controller-manager、kube-scheduler、etcd
192.168.1.181	master2	master	kube-apiserver、kube-controller-manager、kube-scheduler、etcd
192.168.1.182	master3	master	kube-apiserver、kube-controller-manager、kube-scheduler、etcd
192.168.1.183	node1	node	kubelet、kube-proxy
192.168.1.184	node2	node	kubelet、kube-proxy
192.168.1.185	node3	node	kubelet、kube-proxy

1.2 软件版本

软件名	版本
kube-apiserver、kube-controller-manager、kube-scheduler、kubelet、kube-proxy	v1.20.2
kube-apiserver、kube-controller-manager、kube-scheduler、kubelet、kube-proxy	v1.20.2
etcd	v3.4.13
calico	v3.14
coredns	v1.7.0

注：文档中用到的文件，已上传都网盘，如下载失败，可以从网盘下载：

https://pan.baidu.com/s/1nz3WoiYKQ1x8YCMUSV9L7A

提取码：ufjw

内容较多，建议先收藏再使用电脑端打开观看！

2.环境配置

2.1 修改主机名

修改机器的/etc/hosts文件

cat >> /etc/hosts << EOF
192.168.1.180 master1
192.168.1.181 master2
192.168.1.182 master3
192.168.1.183 node1
192.168.1.184 node2
192.168.1.185 node3
EOF

2.2 关闭防火墙和selinux

systemctl stop firewalld
setenforce 0
sed -i 's/^SELINUX=.\*/SELINUX=disabled/' /etc/selinux/config

2.3 关闭交换分区

swapoff -a && sed -i.bak "s/\/dev\/mapper\/centos-swap/\#\/dev\/mapper\/centos-swap/g" /etc/fstab

2.4 时间同步

yum install -y chrony
systemctl start chronyd
systemctl enable chronyd
chronyc sources

2.5 修改内核参数

cat > /etc/sysctl.d/k8s.conf << EOF
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl --system

2.6 加载ipvs模块

modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
lsmod | grep ip_vs
lsmod | grep nf_conntrack_ipv4
yum install -y ipvsadm

2.7 配置工作目录

每台机器都需要配置证书文件、组件的配置文件、组件的服务启动文件，现专门选择 master1 来统一生成这些文件，然后再分发到其他机器。以下操作在 master1 上进行：

[root@master1 ~]# mkdir -p /data/work
注：该目录为配置文件和证书文件生成目录，后面的所有文件生成相关操作均在此目录下进行
[root@master1 ~]# ssh-keygen -t rsa -b 2048
注：将秘钥分发到另外五台机器，让 master1 可以免密码登录其他机器
这里如果不设置免密也可以，就是麻烦一些，每次发送都要填写密码。

3.搭建etcd集群

3.1 配置etcd工作目录

mkdir -p /etc/etcd
mkdir -p /etc/etcd/ssl

3.1 创建etcd证书

如果wget下载失败或速度慢，请下载上面的百度网盘链接，所有文件都已经下载好，然后上传到服务器。

cd /data/work/
wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64

chmod +x cfssl*
mv cfssl_linux-amd64 /usr/local/bin/cfssl
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
mv cfssl-certinfo_linux-amd64 /usr/local/bin/cfssl-certinfo

3.2 配置ca请求文件

[root@master1 work]# vim ca-csr.json 
{
  "CN": "kubernetes",
  "key": {
      "algo": "rsa",
      "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Hubei",
      "L": "Wuhan",
      "O": "k8s",
      "OU": "system"
    }
  ],
  "ca": {
          "expiry": "87600h"
  }
}

注： CN：Common Name，kube-apiserver 从证书中提取该字段作为请求的用户名 (User Name)；浏览器使用该字段验证网站是否合法； O：Organization，kube-apiserver 从证书中提取该字段作为请求用户所属的组 (Group)

3.3 配置ca证书

[root@master1 work]# cfssl gencert -initca ca-csr.json  | cfssljson -bare ca
[root@master1 work]# vim ca-config.json
{
  "signing": {
      "default": {
          "expiry": "87600h"
        },
      "profiles": {
          "kubernetes": {
              "usages": [
                  "signing",
                  "key encipherment",
                  "server auth",
                  "client auth"
              ],
              "expiry": "87600h"
          }
      }
  }
}

3.4 配置etcd请求文件，注意替换为自己的IP

[root@master1 work]# vim etcd-csr.json
{
  "CN": "etcd",
  "hosts": [
    "127.0.0.1",
    "192.168.1.180",
    "192.168.1.181",
    "192.168.1.182"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [{
    "C": "CN",
    "ST": "Hubei",
    "L": "Wuhan",
    "O": "k8s",
    "OU": "system"
  }]
}

3.5 生成证书

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes etcd-csr.json | cfssljson  -bare etcd
[root@master1 work]# ls etcd*.pem
etcd-key.pem  etcd.pem

3.6 部署etcd集群

下载etcd软件包

[root@master1 work]# wget https://github.com/etcd-io/etcd/releases/download/v3.4.13/etcd-v3.4.13-linux-amd64.tar.gz
[root@master1 work]# tar -xf etcd-v3.4.13-linux-amd64.tar.gz 
[root@master1 work]# cp -p etcd-v3.4.13-linux-amd64/etcd* /usr/local/bin/
[root@master1 work]# rsync -vaz etcd-v3.4.13-linux-amd64/etcd* master2:/usr/local/bin/
[root@master1 work]# rsync -vaz etcd-v3.4.13-linux-amd64/etcd* master3:/usr/local/bin/

创建配置文件,注意替换为自己的IP

[root@master1 work]# vim etcd.conf
#[Member]
ETCD_NAME="etcd1"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.1.180:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.1.180:2379,http://127.0.0.1:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://172.10.1.11:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.1.180:2379"
ETCD_INITIAL_CLUSTER="etcd1=https://192.168.1.180:2380,etcd2=https://192.168.1.181:2380,etcd3=https://192.168.1.182:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

注： ETCD_NAME：节点名称，集群中唯一 ETCD_DATA_DIR：数据目录 ETCD_LISTEN_PEER_URLS：集群通信监听地址 ETCD_LISTEN_CLIENT_URLS：客户端访问监听地址 ETCD_INITIAL_ADVERTISE_PEER_URLS：集群通告地址 ETCD_ADVERTISE_CLIENT_URLS：客户端通告地址 ETCD_INITIAL_CLUSTER：集群节点地址 ETCD_INITIAL_CLUSTER_TOKEN：集群Token ETCD_INITIAL_CLUSTER_STATE：加入集群的当前状态，new是新集群，existing表示加入已有集群

3.7 创建启动服务文件

[root@master1 work]# vim etcd.service
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=-/etc/etcd/etcd.conf
WorkingDirectory=/var/lib/etcd/
ExecStart=/usr/local/bin/etcd \
  --cert-file=/etc/etcd/ssl/etcd.pem \
  --key-file=/etc/etcd/ssl/etcd-key.pem \
  --trusted-ca-file=/etc/etcd/ssl/ca.pem \
  --peer-cert-file=/etc/etcd/ssl/etcd.pem \
  --peer-key-file=/etc/etcd/ssl/etcd-key.pem \
  --peer-trusted-ca-file=/etc/etcd/ssl/ca.pem \
  --peer-client-cert-auth \
  --client-cert-auth
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

同步相关文件到各个节点

[root@master1 work]# cp ca*.pem /etc/etcd/ssl/
[root@master1 work]# cp etcd*.pem /etc/etcd/ssl/
[root@master1 work]# cp etcd.conf /etc/etcd/
[root@master1 work]# cp etcd.service /usr/lib/systemd/system/
[root@master1 work]# for i in master2 master3;do rsync -vaz etcd.conf $i:/etc/etcd/;done
[root@master1 work]# for i in master2 master3;do rsync -vaz etcd*.pem ca*.pem $i:/etc/etcd/ssl/;done
[root@master1 work]# for i in master2 master3;do rsync -vaz etcd.service $i:/usr/lib/systemd/system/;done

注：master2和master3分别修改etcd.conf配置文件中etcd名字和ip，并创建目录 /var/lib/etcd/default.etcd

3.8 启动etcd集群

注：第一次启动可能会卡一段时间，因为节点会等待其他节点启动，如果启动失败，可以手动启动每个etcd服务

[root@master1 work]# mkdir -p /var/lib/etcd/default.etcd
[root@master1 work]# systemctl daemon-reload
[root@master1 work]# systemctl enable etcd.service
[root@master1 work]# systemctl start etcd.service
[root@master1 work]# systemctl status etcd

查看集群状态

[root@master1 work]# ETCDCTL_API=3 /usr/local/bin/etcdctl --write-out=table --cacert=/etc/etcd/ssl/ca.pem --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem --endpoints=https://192.168.1.180:2379,https://192.168.1.181:2379,https://192.168.1.182:2379 endpoint health

4.kubernetes组件部署

4.1 下载安装包

[root@master1 work]# wget https://dl.k8s.io/v1.20.1/kubernetes-server-linux-amd64.tar.gz
[root@master1 work]# tar -xf kubernetes-server-linux-amd64.tar 
[root@master1 work]# cd kubernetes/server/bin/
[root@master1 bin]# cp kube-apiserver kube-controller-manager kube-scheduler kubectl /usr/local/bin/
[root@master1 bin]# rsync -vaz kube-apiserver kube-controller-manager kube-scheduler kubectl master2:/usr/local/bin/
[root@master1 bin]# rsync -vaz kube-apiserver kube-controller-manager kube-scheduler kubectl master3:/usr/local/bin/
[root@master1 bin]# for i in node1 node2 node3;do rsync -vaz kubelet kube-proxy $i:/usr/local/bin/;done
[root@master1 bin]# cd /data/work/
[root@master1 work]# mkdir -p /etc/kubernetes/          # kubernetes组件配置文件存放目录
[root@master1 work]# mkdir -p /etc/kubernetes/ssl     # kubernetes组件证书文件存放目录
[root@master1 work]# mkdir /var/log/kubernetes        # kubernetes组件日志文件存放目录

4.2 部署api-server组件

创建csr请求文件，注意替换为自己的IP

[root@master1 work]# vim kube-apiserver-csr.json
{
  "CN": "kubernetes",
  "hosts": [
    "127.0.0.1",
    "192.168.1.180",
    "192.168.1.181",
    "192.168.1.182",
    "192.168.1.183",
    "192.168.1.184",
    "192.168.1.185",
    "10.255.0.1",
    "kubernetes",
    "kubernetes.default",
    "kubernetes.default.svc",
    "kubernetes.default.svc.cluster",
    "kubernetes.default.svc.cluster.local"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Hubei",
      "L": "Wuhan",
      "O": "k8s",
      "OU": "system"
    }
  ]
}

注：如果 hosts 字段不为空则需要指定授权使用该证书的 IP 或域名列表。由于该证书后续被 kubernetes master 集群使用，需要将master节点的IP都填上，同时还需要填写 service 网络的首个IP。(一般是 kube-apiserver 指定的 service-cluster-ip-range 网段的第一个IP，如 10.254.0.1)

生成证书和token文件

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-apiserver-csr.json | cfssljson -bare kube-apiserver
[root@master1 work]# cat > token.csv << EOF
$(head -c 16 /dev/urandom | od -An -t x | tr -d ' '),kubelet-bootstrap,10001,"system:kubelet-bootstrap"
EOF

创建配置文件，注意替换为自己的IP

[root@master1 work]# vim kube-apiserver.conf
KUBE_APISERVER_OPTS="--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \
  --anonymous-auth=false \
  --bind-address=192.168.1.180 \
  --secure-port=6443 \
  --advertise-address=192.168.1.180 \
  --insecure-port=0 \
  --authorization-mode=Node,RBAC \
  --runtime-config=api/all=true \
  --enable-bootstrap-token-auth \
  --service-cluster-ip-range=10.255.0.0/16 \
  --token-auth-file=/etc/kubernetes/token.csv \
  --service-node-port-range=30000-50000 \
  --tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem  \
  --tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \
  --client-ca-file=/etc/kubernetes/ssl/ca.pem \
  --kubelet-client-certificate=/etc/kubernetes/ssl/kube-apiserver.pem \
  --kubelet-client-key=/etc/kubernetes/ssl/kube-apiserver-key.pem \
  --service-account-key-file=/etc/kubernetes/ssl/ca-key.pem \
    --service-account-signing-key-file=/etc/kubernetes/ssl/ca-key.pem  \
  --service-account-issuer=https://kubernetes.default.svc.cluster.local \
  --etcd-cafile=/etc/etcd/ssl/ca.pem \
  --etcd-certfile=/etc/etcd/ssl/etcd.pem \
  --etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \
  --etcd-servers=https://192.168.1.180:2379,https://192.168.1.181:2379,https://192.168.1.182:2379 \
  --enable-swagger-ui=true \
  --allow-privileged=true \
  --apiserver-count=3 \
  --audit-log-maxage=30 \
  --audit-log-maxbackup=3 \
  --audit-log-maxsize=100 \
  --audit-log-path=/var/log/kube-apiserver-audit.log \
  --event-ttl=1h \
  --alsologtostderr=true \
  --logtostderr=false \
  --log-dir=/var/log/kubernetes \
  --v=4"

注： --logtostderr：启用日志 --v：日志等级 --log-dir：日志目录 --etcd-servers：etcd集群地址 --bind-address：监听地址 --secure-port：https安全端口 --advertise-address：集群通告地址 --allow-privileged：启用授权 --service-cluster-ip-range：Service虚拟IP地址段 --enable-admission-plugins：准入控制模块 --authorization-mode：认证授权，启用RBAC授权和节点自管理 --enable-bootstrap-token-auth：启用TLS bootstrap机制 --token-auth-file：bootstrap token文件 --service-node-port-range：Service nodeport类型默认分配端口范围 --kubelet-client-xxx：apiserver访问kubelet客户端证书 --tls-xxx-file：apiserver https证书 --etcd-xxxfile：连接Etcd集群证书 --audit-log-xxx：审计日志

创建服务启动文件

[root@master1 work]# vim kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=etcd.service
Wants=etcd.service

[Service]
EnvironmentFile=-/etc/kubernetes/kube-apiserver.conf
ExecStart=/usr/local/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure
RestartSec=5
Type=notify
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

同步相关文件到各个节点

[root@master1 work]# cp ca*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp kube-apiserver*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp token.csv /etc/kubernetes/
[root@master1 work]# cp kube-apiserver.conf /etc/kubernetes/    
[root@master1 work]# cp kube-apiserver.service /usr/lib/systemd/system/
[root@master1 work]# rsync -vaz token.csv master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz token.csv master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-apiserver*.pem master2:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-apiserver*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz ca*.pem master2:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz ca*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-apiserver.conf master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-apiserver.conf master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-apiserver.service master2:/usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-apiserver.service master3:/usr/lib/systemd/system/

注：master2和master3配置文件kube-apiserver.conf的IP地址修改为实际的本机IP

启动服务测试

[root@master1 work]# systemctl daemon-reload
[root@master1 work]# systemctl enable kube-apiserver
[root@master1 work]# systemctl start kube-apiserver
[root@master1 work]# systemctl status kube-apiserver
[root@master1 work]# curl --insecure https://192.168.1.1806443/
只要有返回说明启动正常

4.2 部署kubectl组件

创建csr请求文件

[root@master1 work]# vim admin-csr.json
{
  "CN": "admin",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Hubei",
      "L": "Wuhan",
      "O": "system:masters",             
      "OU": "system"
    }
  ]
}

说明：后续 kube-apiserver 使用 RBAC 对客户端(如 kubelet、kube-proxy、Pod)请求进行授权； kube-apiserver 预定义了一些 RBAC 使用的 RoleBindings，如 cluster-admin 将 Group system:masters 与 Role cluster-admin 绑定，该 Role 授予了调用kube-apiserver 的所有 API的权限； O指定该证书的 Group 为 system:masters，kubelet 使用该证书访问 kube-apiserver 时，由于证书被 CA 签名，所以认证通过，同时由于证书用户组为经过预授权的 system:masters，所以被授予访问所有 API 的权限；注：这个admin 证书，是将来生成管理员用的kube config 配置文件用的，现在我们一般建议使用RBAC 来对kubernetes 进行角色权限控制， kubernetes 将证书中的CN 字段作为User， O 字段作为 Group； "O": "system:masters", 必须是system:masters，否则后面kubectl create clusterrolebinding报错。

生成证书

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin
[root@master1 work]# cp admin*.pem /etc/kubernetes/ssl/

创建kubeconfig配置文件，比较重要

kubeconfig 为 kubectl 的配置文件，包含访问 apiserver 的所有信息，如 apiserver 地址、CA 证书和自身使用的证书（这里如果报错找不到kubeconfig路径，请手动复制到相应路径下，没有则忽略）

1.设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.1.180:6443 --kubeconfig=kube.config
2.设置客户端认证参数
[root@master1 work]# kubectl config set-credentials admin --client-certificate=admin.pem --client-key=admin-key.pem --embed-certs=true --kubeconfig=kube.config
3.设置上下文参数
[root@master1 work]# kubectl config set-context kubernetes --cluster=kubernetes --user=admin --kubeconfig=kube.config
4.设置默认上下文
[root@master1 work]# kubectl config use-context kubernetes --kubeconfig=kube.config
[root@master1 work]# mkdir ~/.kube
[root@master1 work]# cp kube.config ~/.kube/config
5.授权kubernetes证书访问kubelet api权限
[root@master1 work]# kubectl create clusterrolebinding kube-apiserver:kubelet-apis --clusterrole=system:kubelet-api-admin --user kubernetes

查看集群组件状态

[root@master1 work]# kubectl cluster-info
[root@master1 work]# kubectl get componentstatuses
[root@master1 work]# kubectl get all --all-namespaces

同步kubectl配置文件到其他节点

[root@master1 work]# rsync -vaz /root/.kube/config master2:/root/.kube/
[root@master1 work]# rsync -vaz /root/.kube/config master3:/root/.kube/

配置kubectl子命令补全

[root@master1 work]# yum install -y bash-completion
[root@master1 work]# source /usr/share/bash-completion/bash_completion
[root@master1 work]# source <(kubectl completion bash)
[root@master1 work]# kubectl completion bash > ~/.kube/completion.bash.inc
[root@master1 work]# source '/root/.kube/completion.bash.inc'  
[root@master1 work]# source $HOME/.bash_profile

4.3 部署kube-controller-manager组件

创建csr请求文件

[root@master1 work]# vim kube-controller-manager-csr.json
{
    "CN": "system:kube-controller-manager",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "hosts": [
      "127.0.0.1",
      "192.168.1.180",
      "192.168.1.181",
      "192.168.1.182"
    ],
    "names": [
      {
        "C": "CN",
        "ST": "Hubei",
        "L": "Wuhan",
        "O": "system:kube-controller-manager",
        "OU": "system"
      }
    ]

注： hosts 列表包含所有 kube-controller-manager 节点 IP； CN 为 system:kube-controller-manager、O 为 system:kube-controller-manager，kubernetes 内置的 ClusterRoleBindings system:kube-controller-manager 赋予 kube-controller-manager 工作所需的权限

生成证书

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager

创建kube-controller-manager的kubeconfig

1.设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.1.180:6443 --kubeconfig=kube-controller-manager.kubeconfig
2.设置客户端认证参数
[root@master1 work]# kubectl config set-credentials system:kube-controller-manager --client-certificate=kube-controller-manager.pem --client-key=kube-controller-manager-key.pem --embed-certs=true --kubeconfig=kube-controller-manager.kubeconfig
3.设置上下文参数
[root@master1 work]# kubectl config set-context system:kube-controller-manager --cluster=kubernetes --user=system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig
4.设置默认上下文
[root@master1 work]# kubectl config use-context system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig

创建配置文件kube-controller-manager.conf

[root@master1 work]# vim kube-controller-manager.conf
KUBE_CONTROLLER_MANAGER_OPTS="--port=0 \
  --secure-port=10252 \
  --bind-address=127.0.0.1 \
  --kubeconfig=/etc/kubernetes/kube-controller-manager.kubeconfig \
  --service-cluster-ip-range=10.255.0.0/16 \
  --cluster-name=kubernetes \
  --cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem \
  --cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \
  --allocate-node-cidrs=true \
  --cluster-cidr=10.0.0.0/16 \
  --experimental-cluster-signing-duration=87600h \
  --root-ca-file=/etc/kubernetes/ssl/ca.pem \
  --service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem \
  --leader-elect=true \
  --feature-gates=RotateKubeletServerCertificate=true \
  --controllers=*,bootstrapsigner,tokencleaner \
  --horizontal-pod-autoscaler-use-rest-clients=true \
  --horizontal-pod-autoscaler-sync-period=10s \
  --tls-cert-file=/etc/kubernetes/ssl/kube-controller-manager.pem \
  --tls-private-key-file=/etc/kubernetes/ssl/kube-controller-manager-key.pem \
  --use-service-account-credentials=true \
  --alsologtostderr=true \
  --logtostderr=false \
  --log-dir=/var/log/kubernetes \
  --v=2"

创建启动文件

[root@master1 work]# vim kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/kube-controller-manager.conf
ExecStart=/usr/local/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target

同步相关文件到各个节点

[root@master1 work]# cp kube-controller-manager*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp kube-controller-manager.kubeconfig /etc/kubernetes/
[root@master1 work]# cp kube-controller-manager.conf /etc/kubernetes/
[root@master1 work]# cp kube-controller-manager.service /usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-controller-manager*.pem master2:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-controller-manager*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-controller-manager.kubeconfig kube-controller-manager.conf master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-controller-manager.kubeconfig kube-controller-manager.conf master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-controller-manager.service master2:/usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-controller-manager.service master3:/usr/lib/systemd/system/

启动服务

[root@master1 work]# systemctl daemon-reload 
[root@master1 work]# systemctl enable kube-controller-manager
[root@master1 work]# systemctl start kube-controller-manager
[root@master1 work]# systemctl status kube-controller-manager

4.4 部署kube-scheduler组件

创建csr请求文件

[root@master1 work]# vim kube-scheduler-csr.json
{
    "CN": "system:kube-scheduler",
    "hosts": [
      "127.0.0.1",
      "192.168.1.180",
      "192.168.1.181",
      "192.168.1.182"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
      {
        "C": "CN",
        "ST": "Hubei",
        "L": "Wuhan",
        "O": "system:kube-scheduler",
        "OU": "system"
      }
    ]
}

注： hosts 列表包含所有 kube-scheduler 节点 IP； CN 为 system:kube-scheduler、O 为 system:kube-scheduler，kubernetes 内置的 ClusterRoleBindings system:kube-scheduler 将赋予 kube-scheduler 工作所需的权限。

生成证书

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler

创建kube-scheduler的kubeconfig

1.设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.1.180:6443 --kubeconfig=kube-scheduler.kubeconfig
2.设置客户端认证参数
[root@master1 work]# kubectl config set-credentials system:kube-scheduler --client-certificate=kube-scheduler.pem --client-key=kube-scheduler-key.pem --embed-certs=true --kubeconfig=kube-scheduler.kubeconfig
3.设置上下文参数
[root@master1 work]# kubectl config set-context system:kube-scheduler --cluster=kubernetes --user=system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig
4.设置默认上下文
[root@master1 work]# kubectl config use-context system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig

创建配置文件kube-scheduler.conf

[root@master1 work]# vim kube-scheduler.conf
KUBE_SCHEDULER_OPTS="--address=127.0.0.1 \
--kubeconfig=/etc/kubernetes/kube-scheduler.kubeconfig \
--leader-elect=true \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2"

创建服务启动文件

[root@master1 work]# vim kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/kube-scheduler.conf
ExecStart=/usr/local/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target

同步相关文件到各个节点

[root@master1 work]# cp kube-scheduler*.pem /etc/kubernetes/ssl/
[root@master1 work]# cp kube-scheduler.kubeconfig /etc/kubernetes/
[root@master1 work]# cp kube-scheduler.conf /etc/kubernetes/
[root@master1 work]# cp kube-scheduler.service /usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-scheduler*.pem master2:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-scheduler*.pem master3:/etc/kubernetes/ssl/
[root@master1 work]# rsync -vaz kube-scheduler.kubeconfig kube-scheduler.conf master2:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-scheduler.kubeconfig kube-scheduler.conf master3:/etc/kubernetes/
[root@master1 work]# rsync -vaz kube-scheduler.service master2:/usr/lib/systemd/system/
[root@master1 work]# rsync -vaz kube-scheduler.service master3:/usr/lib/systemd/system/

启动服务

[root@master1 work]# systemctl daemon-reload
[root@master1 work]# systemctl enable kube-scheduler
[root@master1 work]# systemctl start kube-scheduler
[root@master1 work]# systemctl status kube-scheduler

4.5 部署docker组件

在三个work节点上安装docker组件

[root@node1 ~]# wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo
[root@node1 ~]# yum install -y docker-ce
[root@node1 ~]# systemctl enable docker
[root@node1 ~]# systemctl start docker
[root@node1 ~]# docker --version

修改docker源和驱动

[root@node1 ~]# cat > /etc/docker/daemon.json << EOF
{
    "exec-opts": ["native.cgroupdriver=systemd"],
    "registry-mirrors": [
        "https://1nj0zren.mirror.aliyuncs.com",
        "https://kfwkfulq.mirror.aliyuncs.com",
        "https://2lqq34jg.mirror.aliyuncs.com",
        "https://pee6w651.mirror.aliyuncs.com",
        "http://hub-mirror.c.163.com",
        "https://docker.mirrors.ustc.edu.cn",
        "http://f1361db2.m.daocloud.io",
        "https://registry.docker-cn.com"
    ]
}
EOF
[root@node1 ~]# systemctl restart docker
[root@node1 ~]# docker info | grep "Cgroup Driver"

下载依赖镜像

[root@node1 ~]# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.2
[root@node1 ~]# docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.2 k8s.gcr.io/pause:3.2
[root@node1 ~]# docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.2

[root@node1 ~]# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:1.7.0
[root@node1 ~]# docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:1.7.0 k8s.gcr.io/coredns:1.7.0
[root@node1 ~]# docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:1.7.0

4.6 部署kubelet组件

以下操作在master1上操作

创建kubelet-bootstrap.kubeconfig

[root@master1 work]# BOOTSTRAP_TOKEN=$(awk -F "," '{print $1}' /etc/kubernetes/token.csv)
1.设置集群参数
[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.1.180:6443 --kubeconfig=kubelet-bootstrap.kubeconfig
2.设置客户端认证参数
[root@master1 work]# kubectl config set-credentials kubelet-bootstrap --token=${BOOTSTRAP_TOKEN} --kubeconfig=kubelet-bootstrap.kubeconfig
3.设置上下文参数
[root@master1 work]# kubectl config set-context default --cluster=kubernetes --user=kubelet-bootstrap --kubeconfig=kubelet-bootstrap.kubeconfig
4.设置默认上下文
[root@master1 work]# kubectl config use-context default --kubeconfig=kubelet-bootstrap.kubeconfig
5.创建角色绑定
[root@master1 work]# kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap

创建配置文件kubelet.json

"cgroupDriver": "cgroupfs"要和docker的驱动一致。

address替换为自己node1的IP地址。

[root@master1 work]#  vim kubelet.json
{
  "kind": "KubeletConfiguration",
  "apiVersion": "kubelet.config.k8s.io/v1beta1",
  "authentication": {
    "x509": {
      "clientCAFile": "/etc/kubernetes/ssl/ca.pem"
    },
    "webhook": {
      "enabled": true,
      "cacheTTL": "2m0s"
    },
    "anonymous": {
      "enabled": false
    }
  },
  "authorization": {
    "mode": "Webhook",
    "webhook": {
      "cacheAuthorizedTTL": "5m0s",
      "cacheUnauthorizedTTL": "30s"
    }
  },
  "address": "192.168.1.183",
  "port": 10250,
  "readOnlyPort": 10255,
  "cgroupDriver": "cgroupfs",
  "hairpinMode": "promiscuous-bridge",
  "serializeImagePulls": false,
  "featureGates": {
    "RotateKubeletClientCertificate": true,
    "RotateKubeletServerCertificate": true
  },
  "clusterDomain": "cluster.local.",
  "clusterDNS": ["10.255.0.2"]
}

创建启动文件kubelet.service

[root@master1 work]# vim kubelet.service
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service

[Service]
WorkingDirectory=/var/lib/kubelet
ExecStart=/usr/local/bin/kubelet \
  --bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.kubeconfig \
  --cert-dir=/etc/kubernetes/ssl \
  --kubeconfig=/etc/kubernetes/kubelet.kubeconfig \
  --config=/etc/kubernetes/kubelet.json \
  --network-plugin=cni \
  --pod-infra-container-image=k8s.gcr.io/pause:3.2 \
  --alsologtostderr=true \
  --logtostderr=false \
  --log-dir=/var/log/kubernetes \
  --v=2
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target

注： –hostname-override：显示名称，集群中唯一 –network-plugin：启用CNI –kubeconfig：空路径，会自动生成，后面用于连接apiserver –bootstrap-kubeconfig：首次启动向apiserver申请证书 –config：配置参数文件 –cert-dir：kubelet证书生成目录 –pod-infra-container-image：管理Pod网络容器的镜像

同步相关文件到各个node节点

[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kubelet-bootstrap.kubeconfig kubelet.json $i:/etc/kubernetes/;done
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz ca.pem $i:/etc/kubernetes/ssl/;done
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kubelet.service $i:/usr/lib/systemd/system/;done

注：kubelete.json配置文件address改为各个节点的ip地址在各个work节点上启动服务

[root@node1 ~]# mkdir /var/lib/kubelet
[root@node1 ~]# mkdir /var/log/kubernetes
[root@node1 ~]# systemctl daemon-reload
[root@node1 ~]# systemctl enable kubelet
[root@node1 ~]# systemctl start kubelet
[root@node1 ~]# systemctl status kubelet

确认kubelet服务启动成功后，接着到master1节点上Approve一下bootstrap请求。

执行如下命令可以看到三个worker节点分别发送了三个 CSR 请求：

[root@master1 work]# kubectl get csr

[root@master1 work]# kubectl certificate approve node-csr-HlX3cExsZohWsu8Dd6Rp_ztFejmMdpzvti_qgxo4SAQ
[root@master1 work]# kubectl certificate approve node-csr-oykYfnH_coRF2PLJH4fOHlGznOZUBPDg5BPZXDo2wgk
[root@master1 work]# kubectl certificate approve node-csr-ytRB2fikhL6dykcekGg4BdD87o-zw9WPU44SZ1nFT50
[root@master1 work]# kubectl get csr
[root@master1 work]# kubectl get nodes

4.7 部署kube-proxy组件

创建csr请求文件

[root@master1 work]# vim kube-proxy-csr.json
{
  "CN": "system:kube-proxy",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Hubei",
      "L": "Wuhan",
      "O": "k8s",
      "OU": "system"
    }
  ]
}

生成证书

[root@master1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy

创建kubeconfig文件

[root@master1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.1.180:6443 --kubeconfig=kube-proxy.kubeconfig
[root@master1 work]# kubectl config set-credentials kube-proxy --client-certificate=kube-proxy.pem --client-key=kube-proxy-key.pem --embed-certs=true --kubeconfig=kube-proxy.kubeconfig
[root@master1 work]# kubectl config set-context default --cluster=kubernetes --user=kube-proxy --kubeconfig=kube-proxy.kubeconfig
[root@master1 work]# kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig

创建kube-proxy配置文件

[root@master1 work]# vim kube-proxy.yaml
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: 192.168.1.183
clientConnection:
  kubeconfig: /etc/kubernetes/kube-proxy.kubeconfig
clusterCIDR: 192.168.0.0/16
healthzBindAddress: 192.168.1.183:10256
kind: KubeProxyConfiguration
metricsBindAddress: 192.168.1.183:10249
mode: "ipvs"

创建服务启动文件

[root@master1 work]# vim kube-proxy.service
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
WorkingDirectory=/var/lib/kube-proxy
ExecStart=/usr/local/bin/kube-proxy \
  --config=/etc/kubernetes/kube-proxy.yaml \
  --alsologtostderr=true \
  --logtostderr=false \
  --log-dir=/var/log/kubernetes \
  --v=2
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

同步文件到各个节点

[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kube-proxy.kubeconfig kube-proxy.yaml $i:/etc/kubernetes/;done
[root@master1 work]# for i in node1 node2 node3;do rsync -vaz kube-proxy.service $i:/usr/lib/systemd/system/;done

注：配置文件kube-proxy.yaml中address修改为各节点的实际IP

启动服务

[root@node1 ~]# mkdir -p /var/lib/kube-proxy
[root@node1 ~]# systemctl daemon-reload
[root@node1 ~]# systemctl enable kube-proxy
[root@node1 ~]# systemctl restart kube-proxy
[root@node1 ~]# systemctl status kube-proxy

4.7 配置网络组件calico

[root@master1 work]# wget https://docs.projectcalico.org/v3.14/manifests/calico.yaml
[root@master1 work]# kubectl apply -f calico.yaml 
[root@master1 work]# kubectl get pods -A

4.8 配置部署coredns组件

[root@master1 work]wget https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/coredns.yaml.sed
修改yaml文件三处:
kubernetes cluster.local in-addr.arpa ip6.arpa
forward . /etc/resolv.conf
clusterIP: 10.255.0.2
在下面文件
apiVersion: v1
kind: ConfigMap
metadata:
  name: coredns
  namespace: kube-system
data:
  Corefile: |
    .:53 {
        errors
        health {
          lameduck 5s
        }
        ready
        kubernetes cluster.local  in-addr.arpa ip6.arpa {
          fallthrough in-addr.arpa ip6.arpa
        }
        prometheus :9153
        forward . /etc/resolv.conf {
          max_concurrent 1000
        }
        cache 30
        loop
        reload
        loadbalance
    }
---
apiVersion: v1
kind: Service
metadata:
  name: kube-dns
  namespace: kube-system
  annotations:
    prometheus.io/port: "9153"
    prometheus.io/scrape: "true"
  labels:
    k8s-app: kube-dns
    kubernetes.io/cluster-service: "true"
    kubernetes.io/name: "CoreDNS"
spec:
  selector:
    k8s-app: kube-dns
  clusterIP: 10.255.0.2
  ports:
  - name: dns
    port: 53
    protocol: UDP
  - name: dns-tcp
    port: 53
    protocol: TCP
  - name: metrics
    port: 9153
    protocol: TCP

[root@master1 work]# kubectl apply -f coredns.yaml

5.部署Nginx，验证集群

5.1 验证集群访问

[root@master1 ~]# vim nginx.yaml 
---
apiVersion: v1
kind: ReplicationController
metadata:
  name: nginx-controller
spec:
  replicas: 2
  selector:
    name: nginx
  template:
    metadata:
      labels:
        name: nginx
    spec:
      containers:
        - name: nginx
          image: nginx:1.19.6
          ports:
            - containerPort: 80
---
apiVersion: v1
kind: Service
metadata:
  name: nginx-service-nodeport
spec:
  ports:
    - port: 80
      targetPort: 80
      nodePort: 30001
      protocol: TCP
  type: NodePort
  selector:
    name: nginx
[root@master1 ~]# kubectl apply -f nginx.yaml
[root@master1 ~]# kubectl get svc
[root@master1 ~]# kubectl get pods

注：我这里只显示了两个node节点

在浏览器中，使用http://任意nodeIP:30001，都可以访问nginx页面。

验证coreDNS

[root@master1 ~]# vim busybox.yaml 
apiVersion: v1
kind: Pod
metadata:
  name: busybox
  namespace: default
spec:
  containers:
  - name: busybox
    image: busybox:1.28
    command:
      - sleep
      - "3600"
    imagePullPolicy: IfNotPresent
  restartPolicy: Always
[root@master1 ~]# kubectl create -f busybox.yaml

在node节点上操作

[root@work1 ~]# docker exec -it 055207a7d2b2 /bin/sh
/ # cat /etc/resolv.conf
nameserver 10.255.0.2
search default.svc.cluster.local. svc.cluster.local. cluster.local. novalocal
options ndots:5
/ # nslookup kubernetes.default
Server:    10.255.0.2
Address 1: 10.255.0.2 kube-dns.kube-system.svc.cluster.local

Name:      kubernetes.default
Address 1: 10.255.0.1 kubernetes.default.svc.cluster.local
/ # nslookup nginx-service-nodeport
Server:    10.255.0.2
Address 1: 10.255.0.2 kube-dns.kube-system.svc.cluster.local

Name:      nginx-service-nodeport
Address 1: 10.255.78.185 nginx-service-nodeport.default.svc.cluster.local
/ # nslookup baidu.com
Server:    10.255.0.2
Address 1: 10.255.0.2 kube-dns.kube-system.svc.cluster.local

Name:      baidu.com
Address 1: 220.181.38.148
Address 2: 39.156.69.79

10.255.0.2 就是我们coreDNS的clusterIP，说明coreDNS配置好了。

解析内部Service的名称，是通过coreDNS去解析

解析外部baidu.com地址，按照前文coreDNS的配置，是通过pod所在node上的/etc/resolv.conf 来代理解析的

恭喜你，整个集群的搭建结束了，有问题欢迎留言，不定时回复！