H3C MSR2011路由器pppoe配置实例

[H3C]dis current-configuration
#
 version 5.20, Release 1809P01
#
 sysname H3C
#
 domain default enable system
#
 telnet server enable
#
acl number 2000
 rule 0 permit source 192.168.6.0 0.0.0.255
#
vlan 1
#
domain system
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable
#
user-group system
#
local-user admin
 password cipher .]@USE=B,53Q=^Q`MAF4<1!!
 authorization-attribute level 3
 service-type telnet
#
interface Aux0
 async mode flow
 link-protocol ppp
#
interface Cellular0/0
 async mode protocol
 link-protocol ppp
#
interface Dialer1
 nat outbound 2000
 link-protocol ppp
 ppp pap local-user sz31740741@163.gd password cipher &7HC@%XaGR=V'_1BX@K`F!!!
 ip address ppp-negotiate
 tcp mss 1024
 dialer user sz31740741@163.gd
 dialer-group 1
 dialer bundle 1
#
interface Ethernet0/0
 port link-mode route
 pppoe-client dial-bundle-number 1
#
interface Serial0/0
 link-protocol ppp
 ip address 33.33.32.2 255.255.255.252
#
interface NULL0
#
interface Vlan-interface1
 ip address 192.168.6.254 255.255.255.0
#
interface Ethernet0/1
 port link-mode bridge
#
interface Ethernet0/2
 port link-mode bridge
#
interface Ethernet0/3
 port link-mode bridge
#
interface Ethernet0/4
 port link-mode bridge
#              
 ip route-static 0.0.0.0 0.0.0.0 Dialer1
 ip route-static 10.1.0.0 255.255.255.0 33.33.32.1
 ip route-static 10.5.113.0 255.255.255.0 33.33.32.1
 ip route-static 192.168.0.0 255.255.0.0 33.33.32.1
#
 dialer-rule 1 ip permit
#
 load xml-configuration
#
 load tr069-configuration
#
user-interface tty 12
user-interface aux 0
user-interface vty 0 4
 authentication-mode scheme
#
return
[H3C]