总觉得网上的教程不太详细,在这里力求写得详细些、傻瓜些~这里我只照顾FC5的用户,某天再扩展一下吧。
系统:LINUX FEDORA CORE 5
所需软件:
http://olpc.download.redhat.com/olpc/rawhide-snapshots/2006-05-27-0237/Fedora/RPMS/compat-libstdc++-296-2.96-135.i386.rpm
http://forum.huawei-3com.com/thread-19936-1-1.html里面的H3C 8021XClient CH V220_0210-Linux.tar.rar
1.安装compat-libstdc++-296-2.96-135.i386.rpm。在X-WINDOWS里双击文件的图标就可以了。
2.在X-WINDOWS里选择 桌面->管理->网络,根据学校给的配置设定。我的是双击设备,在弹出的对话框里选择“静态设置的IP地址”,然后填好IP、子网掩码、网关,其他的不用改,然后点确定。再填好DNS选项卡,填上DNS。然后选择 文件->保存,再激活一下网卡。(不同的学校设置的方法可能会不同)
3.右键单击H3C 8021XClient CH V220_0210-Linux.tar.rar图标,选择“用归档管理器打开”,然后将其中的文件解压缩到某处,我们这里假定解压到“/online/”下
4.用 "cd /online/h3c802.1xClient"命令进入到"/online/h3c802.1xClient"文件夹下,使用"./pre.ps"命令安装客户端。
5.使用"./linuxlx -c"对客户端进行配置。
执行命令后会出现:
Current configuration is :
The way to initialize 802 .1X authentication.......:multicast
Send all packets by multicast.....................:N
Refresh IP address after connecting...............:N
Save message and package to log...................:N
Continue to configure your network connection arguments ? (Y / N)
Current configuration is:
The way to initialize 802.1X authentication.......:multicast
Send all packets by multicast.....................:N
Refresh IP address after connecting...............:N
Save message and package to log...................:N
Continue to configure your network connection arguments?(Y/N)
y
There are two ways to initialize 802.1X authentication:
1. Trap by broadcast.
2. Trap by multicast.
Please choose the way to initialize the 802.1X authentication :
2
Send all packets by multicast? (Y/N):
n
Refresh your IP address after connecting? (Y/N):
n
Save message and package to log?(Y/N):
n
Configuration has finished, do you want to save it?(Y/N)
y
Save configuration sucessfully!
6..执行"./linux1x -u 用户名/密码 -n eth0 -d"
屏幕显示:
device check
server check
pass authentication
呵呵,成功了!
7.打开FIREFOX,上网啦~
还有其他的一些关于客户端的东东在/online/h3c802.1xClient/Readme.htm里。