从ip_queue到nfnetlink_queue(上)

从ip_queue到nfnetlink_queue(上)
 
本文档的Copyleft归yfydz所有,使用GPL发布,可以自由拷贝,转载,转载时请保持文档的完整性,严禁用于任何商业用途。
msn: yfydz_no1@hotmail.com
来源: http://yfydz.cublog.cn

1. 前言
在2.4内核中出现了ip_queue,用于将数据包从内核空间传递到用户空间,其不足之处是只能有一个应用程序接收内核数据。到了2.6.14以后,新增了nfnetlink_queue,理论上可最大可支持65536个应用程序接口,而且可以兼容ip_queue。
不过从内核到用户空间的通道还是只有一个,实际上netfilter对每个协议族也只有一个队列,这里说的65536个子队列的实现就象 802.1Q实现VLAN一样是在数据包中设置ID号来区分的,不同ID的包都通过相同的接口传输,只是在两端根据ID号进行了分类处理。
2. 用户空间

用户空间的支持库包括两个:libnfnetlink和libnetfilter_queue,后者需要前者支持,其源码可到netfilter网站上下载。

2.1 数据结构

2.1.1
/*linux_nfnetlink.h */
// 基本属性结构
struct nfattr
{
// 长度
 u_int16_t nfa_len;
// leix
 u_int16_t nfa_type; /* we use 15 bits for the type, and the highest
    * bit to indicate whether the payload is nested */
} __attribute__ ((packed));
// nf基本消息结构
struct nfgenmsg {
 u_int8_t  nfgen_family;  /* AF_xxx */
 u_int8_t  version;  /* nfnetlink version */
 u_int16_t res_id;  /* resource id */
} __attribute__ ((packed));

/* nfnl是netfilter  netlink的缩写 */
// nfnl回调结构
struct nfnl_callback
{
 int (*call)(struct sock *nl, struct sk_buff *skb,
  struct nlmsghdr *nlh, struct nfattr *cda[], int *errp);
 u_int16_t attr_count; /* number of nfattr's */
};

// netfilter netlink子系统结构
struct nfnetlink_subsystem
{
 const char *name;
 __u8 subsys_id;  /* nfnetlink subsystem ID */
 __u8 cb_count;  /* number of callbacks */
 struct nfnl_callback *cb; /* callback for individual types */
};

2.1.2
/*libnfnetlink.h */
/* nfnl是netfilter  netlink的缩写 */
// netfilter的netlink消息头结构
struct nfnlhdr {
 struct nlmsghdr nlh;
 struct nfgenmsg nfmsg;
};
// netfilter的netlink回调函数
struct nfnl_callback {
 int (*call)(struct nlmsghdr *nlh, struct nfattr *nfa[], void *data);
 void *data;
 u_int16_t attr_count;
};

2.1.3
/* libnfnetlink.c */
// netfilter netlink子系统的handle结构
struct nfnl_subsys_handle {
 struct nfnl_handle  *nfnlh;
 u_int32_t  subscriptions;
 u_int8_t  subsys_id;
 u_int8_t  cb_count;
 struct nfnl_callback  *cb; /* array of callbacks */
};
#define  NFNL_MAX_SUBSYS   16 /* enough for now */
// netfilter netlink的handle结构
struct nfnl_handle {
 int   fd;     // socket
 struct sockaddr_nl local;  // 本地netlink socket信息
 struct sockaddr_nl peer;   // 对端的netlink socket信息
 u_int32_t  subscriptions;
 u_int32_t  seq;    // 序号
 u_int32_t  dump;  
 struct nlmsghdr  *last_nlhdr; // 上一个消息
 struct nfnl_subsys_handle subsys[NFNL_MAX_SUBSYS+1]; // 各子系统的handle
};
/*linux_nfnetlink_queue.h */
/* nfqnl是netfilter queue netlink的缩写 */
// nfqueue_netlink消息类型
enum nfqnl_msg_types {
 NFQNL_MSG_PACKET,  /* packet from kernel to userspace */
 NFQNL_MSG_VERDICT,  /* verdict from userspace to kernel */
 NFQNL_MSG_CONFIG,  /* connect to a particular queue */
 NFQNL_MSG_MAX
};
// nfqueue_netlink消息包头结构
struct nfqnl_msg_packet_hdr {
 u_int32_t packet_id; /* unique ID of packet in queue */
 u_int16_t hw_protocol; /* hw protocol (network order) */
 u_int8_t hook;  /* netfilter hook */
} __attribute__ ((packed));
// nfqueue_netlink消息包头的硬件地址信息
struct nfqnl_msg_packet_hw {
 u_int16_t hw_addrlen;
 u_int16_t _pad;
 u_int8_t hw_addr[8];
} __attribute__ ((packed));
// nfqueue_netlink消息数据包时间戳,都是64位的
struct nfqnl_msg_packet_timestamp {
 aligned_u64 sec;
 aligned_u64 usec;
} __attribute__ ((packed));
// nfqueue_netlink属性类型
enum nfqnl_attr_type {
 NFQA_UNSPEC,
 NFQA_PACKET_HDR,
 NFQA_VERDICT_HDR,  /* nfqnl_msg_verdict_hrd */
 NFQA_MARK,   /* u_int32_t nfmark */
 NFQA_TIMESTAMP,   /* nfqnl_msg_packet_timestamp */
 NFQA_IFINDEX_INDEV,  /* u_int32_t ifindex */
 NFQA_IFINDEX_OUTDEV,  /* u_int32_t ifindex */
 NFQA_IFINDEX_PHYSINDEV,  /* u_int32_t ifindex */
 NFQA_IFINDEX_PHYSOUTDEV, /* u_int32_t ifindex */
 NFQA_HWADDR,   /* nfqnl_msg_packet_hw */
 NFQA_PAYLOAD,   /* opaque data payload */
 __NFQA_MAX
};
#define NFQA_MAX (__NFQA_MAX - 1)
// nfqueue_netlink数据包的裁定结果头结构
struct nfqnl_msg_verdict_hdr {
 u_int32_t verdict;
 u_int32_t id;
} __attribute__ ((packed));

// nfqueue_netlink消息的配置命令类型
enum nfqnl_msg_config_cmds {
 NFQNL_CFG_CMD_NONE,
 NFQNL_CFG_CMD_BIND,   // 和队列绑定
 NFQNL_CFG_CMD_UNBIND, // 取消和队列的绑定
 NFQNL_CFG_CMD_PF_BIND,  // 和协议族绑定
 NFQNL_CFG_CMD_PF_UNBIND, // 取消和协议族的绑定
};
// nfqueue_netlink消息的配置命令结构
struct nfqnl_msg_config_cmd {
 u_int8_t command; /* nfqnl_msg_config_cmds */
 u_int8_t _pad;
 u_int16_t pf;  /* AF_xxx for PF_[UN]BIND */
} __attribute__ ((packed));
// nfqueue_netlink消息的配置模式类型
enum nfqnl_config_mode {
 NFQNL_COPY_NONE,  // 不拷贝
 NFQNL_COPY_META,  // 只拷贝头部信息
 NFQNL_COPY_PACKET, // 拷贝整个数据包
};
// nfqueue_netlink消息的配置结构
struct nfqnl_msg_config_params {
 u_int32_t copy_range;
 u_int8_t copy_mode; /* enum nfqnl_config_mode */
} __attribute__ ((packed));

// nfqueue_netlink属性类型
enum nfqnl_attr_config {
 NFQA_CFG_UNSPEC,
 NFQA_CFG_CMD,   /* nfqnl_msg_config_cmd */
 NFQA_CFG_PARAMS,  /* nfqnl_msg_config_params */
 __NFQA_CFG_MAX
};
#define NFQA_CFG_MAX (__NFQA_CFG_MAX-1)

2.1.4
/* libnetfilter_queue.c */
// netfilter queue的handle结构
struct nfq_handle
{
 struct nfnl_handle *nfnlh;  // nf netlink handle
 struct nfnl_subsys_handle *nfnlssh; // 子系统的handle
 struct nfq_q_handle *qh_list; //
};
// netfilter queue的节点队列结构
struct nfq_q_handle
{
// 下一个节点
 struct nfq_q_handle *next;
// 该队列的handle
 struct nfq_handle *h;
// id号,每个queue有唯一ID,一共可支持65536个queue
 u_int16_t id;
// typedef int  nfq_callback(struct nfq_q_handle *gh, struct nfgenmsg *nfmsg,
//         struct nfq_data *nfad, void *data);
// nf queue的回调函数
 nfq_callback *cb;
// nf queue的回调函数输入数据指针
 void *data;
};
struct nfq_data {
 struct nfattr **data;
};

2.2 接口函数声明
2.2.1 libnfnetlink
实际上这些函数和宏都是被netfilter_queue的接口函数所包装,一般用户应用程序中不用直接调用这些函数或宏。
/* libnfnetlink.h */
extern int nfnl_fd(struct nfnl_handle *h);
/* get a new library handle */
extern struct nfnl_handle *nfnl_open(void);
extern int nfnl_close(struct nfnl_handle *);
extern struct nfnl_subsys_handle *nfnl_subsys_open(struct nfnl_handle *,
         u_int8_t, u_int8_t,
         unsigned int);
extern void nfnl_subsys_close(struct nfnl_subsys_handle *);
/* sending of data */
extern int nfnl_send(struct nfnl_handle *, struct nlmsghdr *);
extern int nfnl_sendmsg(const struct nfnl_handle *, const struct msghdr *msg,
   unsigned int flags);
extern int nfnl_sendiov(const struct nfnl_handle *nfnlh,
   const struct iovec *iov, unsigned int num,
   unsigned int flags);
extern void nfnl_fill_hdr(struct nfnl_subsys_handle *, struct nlmsghdr *,
     unsigned int, u_int8_t, u_int16_t, u_int16_t,
     u_int16_t);
extern int nfnl_talk(struct nfnl_handle *, struct nlmsghdr *, pid_t,
                     unsigned, struct nlmsghdr *,
                     int (*)(struct sockaddr_nl *, struct nlmsghdr *, void *),
                     void *);
/* simple challenge/response */
extern int nfnl_listen(struct nfnl_handle *,
                      int (*)(struct sockaddr_nl *, struct nlmsghdr *, void *),
                      void *);
/* receiving */
extern ssize_t nfnl_recv(const struct nfnl_handle *h, unsigned char *buf, size_t len);
extern int nfnl_callback_register(struct nfnl_subsys_handle *,
      u_int8_t type, struct nfnl_callback *cb);
extern int nfnl_callback_unregister(struct nfnl_subsys_handle *, u_int8_t type);
extern int nfnl_handle_packet(struct nfnl_handle *, char *buf, int len);
/* parsing */
extern struct nfattr *nfnl_parse_hdr(const struct nfnl_handle *nfnlh,
         const struct nlmsghdr *nlh,
         struct nfgenmsg **genmsg);
extern int nfnl_check_attributes(const struct nfnl_handle *nfnlh,
     const struct nlmsghdr *nlh,
     struct nfattr *tb[]);
extern struct nlmsghdr *nfnl_get_msg_first(struct nfnl_handle *h,
        const unsigned char *buf,
        size_t len);
extern struct nlmsghdr *nfnl_get_msg_next(struct nfnl_handle *h,
       const unsigned char *buf,
       size_t len);
#define nfnl_attr_present(tb, attr)   /
 (tb[attr-1])
#define nfnl_get_data(tb, attr, type)   /
 ({ type __ret = 0;    /
  if (tb[attr-1])    /
  __ret = *(type *)NFA_DATA(tb[attr-1]);  /
  __ret;      /
  })
#define nfnl_get_pointer_to_data(tb, attr, type) /
 ({ type *__ret = NULL;   /
  if (tb[attr-1])    /
  __ret = NFA_DATA(tb[attr-1]);   /
  __ret;      /
  })
/* nfnl attribute handling functions */
extern int nfnl_addattr_l(struct nlmsghdr *, int, int, void *, int);
extern int nfnl_addattr16(struct nlmsghdr *, int, int, u_int16_t);
extern int nfnl_addattr32(struct nlmsghdr *, int, int, u_int32_t);
extern int nfnl_nfa_addattr_l(struct nfattr *, int, int, void *, int);
extern int nfnl_nfa_addattr16(struct nfattr *, int, int, u_int16_t);
extern int nfnl_nfa_addattr32(struct nfattr *, int, int, u_int32_t);
extern int nfnl_parse_attr(struct nfattr **, int, struct nfattr *, int);
#define nfnl_parse_nested(tb, max, nfa) /
 nfnl_parse_attr((tb), (max), NFA_DATA((nfa)), NFA_PAYLOAD((nfa)))
#define nfnl_nest(nlh, bufsize, type)     /
({ struct nfattr *__start = NLMSG_TAIL(nlh);  /
 nfnl_addattr_l(nlh, bufsize, (NFNL_NFA_NEST | type), NULL, 0);  /
 __start; })
#define nfnl_nest_end(nlh, tail)     /
({ (tail)->nfa_len = (void *) NLMSG_TAIL(nlh) - (void *) tail; })
extern void nfnl_build_nfa_iovec(struct iovec *iov, struct nfattr *nfa,
     u_int16_t type, u_int32_t len,
     unsigned char *val);
extern unsigned int nfnl_rcvbufsiz(struct nfnl_handle *h, unsigned int size);

extern void nfnl_dump_packet(struct nlmsghdr *, int, char *);

2.2.2 libnetfilter_queue
/* libnetfilter_queue.h */
// 打开一个nfqueue的handle,返回NULL表示失败
extern struct nfq_handle *nfq_open(void);
// 打开nf netlink handle对应的nfqueue
extern struct nfq_handle *nfq_open_nfnl(struct nfnl_handle *nfnlh);
// 关闭nfqueue
extern int nfq_close(struct nfq_handle *h);
// 对nfqueue绑定协议族
extern int nfq_bind_pf(struct nfq_handle *h, u_int16_t pf);
// 对nfqueue取消协议族绑定
extern int nfq_unbind_pf(struct nfq_handle *h, u_int16_t pf);
// 建立具体的queue的handle,由num指定queue的序号, 返回NULL失败
extern struct nfq_q_handle *nfq_create_queue(struct nfq_handle *h,
             u_int16_t num,
       nfq_callback *cb,
       void *data);
// 释放队列
extern int nfq_destroy_queue(struct nfq_q_handle *qh);
// 处理队列的数据包
extern int nfq_handle_packet(struct nfq_handle *h, char *buf, int len);

// 设置queue handle的数据拷贝模式
extern int nfq_set_mode(struct nfq_q_handle *qh,
     u_int8_t mode, unsigned int len);
// 设置数据包的判定结果, id用于指定具体的包, buf和data_len用于传递修改后的数据
extern int nfq_set_verdict(struct nfq_q_handle *qh,
        u_int32_t id,
        u_int32_t verdict,
        u_int32_t data_len,
        unsigned char *buf);
// 设置数据包的mark值
extern int nfq_set_verdict_mark(struct nfq_q_handle *qh,
      u_int32_t id,
         u_int32_t verdict,
      u_int32_t mark,
         u_int32_t datalen,
      unsigned char *buf);
/* message parsing function */
// 从缓冲区原始数据中返回消息头结构
extern struct nfqnl_msg_packet_hdr *
    nfq_get_msg_packet_hdr(struct nfq_data *nfad);
// 获取数据的mark信息
extern u_int32_t nfq_get_nfmark(struct nfq_data *nfad);
extern int nfq_get_timestamp(struct nfq_data *nfad, struct timeval *tv);
/* return 0 if not set */
// 返回数据包进入网卡的索引号
extern u_int32_t nfq_get_indev(struct nfq_data *nfad);
// 返回数据包进入的物理网卡的索引号
extern u_int32_t nfq_get_physindev(struct nfq_data *nfad);
// 返回数据包发出网卡的索引号
extern u_int32_t nfq_get_outdev(struct nfq_data *nfad);
// 返回数据包发出的物理网卡的索引号
extern u_int32_t nfq_get_physoutdev(struct nfq_data *nfad);
// 返回数据包硬件地址
extern struct nfqnl_msg_packet_hw *nfq_get_packet_hw(struct nfq_data *nfad);
/* return -1 if problem, length otherwise */
// 获取数据包中载荷地址
extern int nfq_get_payload(struct nfq_data *nfad, char **data);

2.3 netfilter queue接口函数的实现
/* libnetfilter_queue.c */
// 删除一个queue节点
// 各个nfq_q_handle结构都是其nfq_handle中的qh_list链表中的一个节点
// 所以删除节点就是将其从链表中移出即可,该函数不进行内存释放操作
// 结构可表示如下:
//   nfq_handle -> qh_list
//       ^            |
//       |            V
//       |         nfq_q_handle -> nfq_q_handle -> ...
//       |              |               |
//       |______________|_______________|_________________

static void del_qh(struct nfq_q_handle *qh)
{
 struct nfq_q_handle *cur_qh, *prev_qh = NULL;
 for (cur_qh = qh->h->qh_list; cur_qh; cur_qh = cur_qh->next) {
  if (cur_qh == qh) {
   if (prev_qh)
    prev_qh->next = qh->next;
   else
    qh->h->qh_list = qh->next;
   return;
  }
  prev_qh = cur_qh;
 }
}
// 把一个nfq_q_handle结构添加到链表中
static void add_qh(struct nfq_q_handle *qh)
{
 qh->next = qh->h->qh_list;
 qh->h->qh_list = qh;
}
// 根据ID号找nfq_q_handle节点
static struct nfq_q_handle *find_qh(struct nfq_handle *h, u_int16_t id)
{
 struct nfq_q_handle *qh;
 for (qh = h->qh_list; qh; qh = qh->next) {
  if (qh->id == id)
   return qh;
 }
 return NULL;
}
/* build a NFQNL_MSG_CONFIG message */
// 向netlink socket发送配置信息,该函数是static的,外部函数不可见
 static int
__build_send_cfg_msg(struct nfq_handle *h, u_int8_t command,
  u_int16_t queuenum, u_int16_t pf)
{
 char buf[NFNL_HEADER_LEN
  +NFA_LENGTH(sizeof(struct nfqnl_msg_config_cmd))];
 struct nfqnl_msg_config_cmd cmd;
 struct nlmsghdr *nmh = (struct nlmsghdr *) buf;
 nfnl_fill_hdr(h->nfnlssh, nmh, 0, AF_UNSPEC, queuenum,
   NFQNL_MSG_CONFIG, NLM_F_REQUEST|NLM_F_ACK);
 cmd.command = command;
 cmd.pf = htons(pf);
 nfnl_addattr_l(nmh, sizeof(buf), NFQA_CFG_CMD, &cmd, sizeof(cmd));
 return nfnl_talk(h->nfnlh, nmh, 0, 0, NULL, NULL, NULL);
}
// 接收netlink数据包,该函数是也static的,外部函数不可见
static int __nfq_rcv_pkt(struct nlmsghdr *nlh, struct nfattr *nfa[],
  void *data)
{
 struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
 struct nfq_handle *h = data;
 u_int16_t queue_num = ntohs(nfmsg->res_id);
// 根据ID找到nfq_q_handle
 struct nfq_q_handle *qh = find_qh(h, queue_num);
 struct nfq_data nfqa;
 if (!qh)
  return -ENODEV;
 if (!qh->cb)
  return -ENODEV;
 nfqa.data = nfa;
// 调用nfq_q_handle的回调函数
 return qh->cb(qh, nfmsg, &nfqa, qh->data);
}
// 固定的回调结构
static struct nfnl_callback pkt_cb = {
 .call  = &__nfq_rcv_pkt,
 .attr_count = NFQA_MAX,
};
/* public interface */
// 返回nfq_handle的netlink handle
struct nfnl_handle *nfq_nfnlh(struct nfq_handle *h)
{
 return h->nfnlh;
}
 
// 返回nfq_handle的netlink handle的netlink套接字
int nfq_fd(struct nfq_handle *h)
{
 return nfnl_fd(nfq_nfnlh(h));
}
struct nfq_handle *nfq_open(void)
{
// 先打开netlink handle
 struct nfnl_handle *nfnlh = nfnl_open();
 struct nfq_handle *qh;
 if (!nfnlh)
  return NULL;
// 再调用nfq_open_nfnl()打开nf queue handle
 qh = nfq_open_nfnl(nfnlh);
 if (!qh)
  nfnl_close(nfnlh);
 return qh;
}
// 已存在netlink handle时打开nfq_handle
struct nfq_handle *nfq_open_nfnl(struct nfnl_handle *nfnlh)
{
 struct nfq_handle *h;
 int err;
// 分配内存
 h = malloc(sizeof(*h));
 if (!h)
  return NULL;
 memset(h, 0, sizeof(*h));
// 把nfq_handle和netlink handle连接起来
 h->nfnlh = nfnlh;
// 打开NFNL_SUBSYS_QUEUE类型的子系统
 h->nfnlssh = nfnl_subsys_open(h->nfnlh, NFNL_SUBSYS_QUEUE,
          NFQNL_MSG_MAX, 0);
 if (!h->nfnlssh) {
  /* FIXME: nfq_errno */
  goto out_free;
 }
// 登记回调处理函数
 pkt_cb.data = h;
 err = nfnl_callback_register(h->nfnlssh, NFQNL_MSG_PACKET, &pkt_cb);
 if (err < 0) {
  nfq_errno = err;
  goto out_close;
 }
 return h;
out_close:
 nfnl_subsys_close(h->nfnlssh);
out_free:
 free(h);
 return NULL;
}
int nfq_close(struct nfq_handle *h)
{
 int ret;
// 关闭子系统 
 nfnl_subsys_close(h->nfnlssh);
// 关闭netlink handle
 ret = nfnl_close(h->nfnlh);
 if (ret == 0)
  free(h);
 return ret;
}
/* bind nf_queue from a specific protocol family */
// 以下函数均是调用__build_send_cfg_msg()函数向内核发送消息命令
int nfq_bind_pf(struct nfq_handle *h, u_int16_t pf)
{
 return __build_send_cfg_msg(h, NFQNL_CFG_CMD_PF_BIND, 0, pf);
}
/* unbind nf_queue from a specific protocol family */
int nfq_unbind_pf(struct nfq_handle *h, u_int16_t pf)
{
 return __build_send_cfg_msg(h, NFQNL_CFG_CMD_PF_UNBIND, 0, pf);
}
/* bind this socket to a specific queue number */
// 生成一个号码为num的队列
struct nfq_q_handle *nfq_create_queue(struct nfq_handle *h,
  u_int16_t num,
  nfq_callback *cb,
  void *data)
{
 int ret;
 struct nfq_q_handle *qh;
 if (find_qh(h, num))
  return NULL;
// 分配queue节点空间, 设置相应参数
 qh = malloc(sizeof(*qh));
 memset(qh, 0, sizeof(*qh));
 qh->h = h;
 qh->id = num;
 qh->cb = cb;
 qh->data = data;
 
 ret = __build_send_cfg_msg(h, NFQNL_CFG_CMD_BIND, num, 0);
 if (ret < 0) {
  nfq_errno = ret;
  free(qh);
  return NULL;
 }
// 添加到队列中
 add_qh(qh);
 return qh;
}
/* unbind this socket from a specific queue number */
// 释放队列
int nfq_destroy_queue(struct nfq_q_handle *qh)
{
 int ret = __build_send_cfg_msg(qh->h, NFQNL_CFG_CMD_UNBIND, qh->id, 0);
 if (ret == 0) {
  del_qh(qh);
  free(qh);
 }
 return ret;
}
int nfq_handle_packet(struct nfq_handle *h, char *buf, int len)
{
// 实际就是netlink处理包
 return nfnl_handle_packet(h->nfnlh, buf, len);
}
int nfq_set_mode(struct nfq_q_handle *qh,
  u_int8_t mode, u_int32_t range)
{
 char buf[NFNL_HEADER_LEN
  +NFA_LENGTH(sizeof(struct nfqnl_msg_config_params))];
 struct nfqnl_msg_config_params params;
 struct nlmsghdr *nmh = (struct nlmsghdr *) buf;
 nfnl_fill_hdr(qh->h->nfnlssh, nmh, 0, AF_UNSPEC, qh->id,
   NFQNL_MSG_CONFIG, NLM_F_REQUEST|NLM_F_ACK);
 params.copy_range = htonl(range);
 params.copy_mode = mode;
 nfnl_addattr_l(nmh, sizeof(buf), NFQA_CFG_PARAMS, &params,
   sizeof(params));
 return nfnl_talk(qh->h->nfnlh, nmh, 0, 0, NULL, NULL, NULL);
}
static int __set_verdict(struct nfq_q_handle *qh, u_int32_t id,
  u_int32_t verdict, u_int32_t mark, int set_mark,
  u_int32_t data_len, unsigned char *data)
{
 struct nfqnl_msg_verdict_hdr vh;
 char buf[NFNL_HEADER_LEN
  +NFA_LENGTH(sizeof(mark))
  +NFA_LENGTH(sizeof(vh))];
 struct nlmsghdr *nmh = (struct nlmsghdr *) buf;
 struct iovec iov[3];
 int nvecs;
 /* This must be declared here (and not inside the data
  * handling block) because the iovec points to this. */
 struct nfattr data_attr;
 memset(iov, 0, sizeof(iov));
// 设置裁定结果头
 vh.verdict = htonl(verdict);
 vh.id = htonl(id);
 nfnl_fill_hdr(qh->h->nfnlssh, nmh, 0, AF_UNSPEC, qh->id,
   NFQNL_MSG_VERDICT, NLM_F_REQUEST);
 /* add verdict header */
 nfnl_addattr_l(nmh, sizeof(buf), NFQA_VERDICT_HDR, &vh, sizeof(vh));
// 设置数据包的mark值
 if (set_mark)
  nfnl_addattr32(nmh, sizeof(buf), NFQA_MARK, mark);
 iov[0].iov_base = nmh;
 iov[0].iov_len = NLMSG_TAIL(nmh) - (void *)nmh;
 nvecs = 1;
 if (data_len) {
// 如果数据进行修改要传回内核,相应将数据添加到要发送到内核的数据向量中
  nfnl_build_nfa_iovec(&iov[1], &data_attr, NFQA_PAYLOAD,
    data_len, data);
  nvecs += 2;
  /* Add the length of the appended data to the message
   * header.  The size of the attribute is given in the
   * nfa_len field and is set in the nfnl_build_nfa_iovec()
   * function. */
  nmh->nlmsg_len += data_attr.nfa_len;
 }
// 向内核发送数据向量
 return nfnl_sendiov(qh->h->nfnlh, iov, nvecs, 0);
}
int nfq_set_verdict(struct nfq_q_handle *qh, u_int32_t id,
  u_int32_t verdict, u_int32_t data_len,
  unsigned char *buf)
{
 return __set_verdict(qh, id, verdict, 0, 0, data_len, buf);
int nfq_set_verdict_mark(struct nfq_q_handle *qh, u_int32_t id,
  u_int32_t verdict, u_int32_t mark,
  u_int32_t datalen, unsigned char *buf)
{
 return __set_verdict(qh, id, verdict, mark, 1, datalen, buf);
}
/*************************************************************
 * Message parsing functions
 *************************************************************/
// 以下函数均是调用nfnl_get_pointer_to_data()和nfnl_get_data()函数获取
// 指定数据
struct nfqnl_msg_packet_hdr *nfq_get_msg_packet_hdr(struct nfq_data *nfad)
{
 return nfnl_get_pointer_to_data(nfad->data, NFQA_PACKET_HDR,
     struct nfqnl_msg_packet_hdr);
}
uint32_t nfq_get_nfmark(struct nfq_data *nfad)
{
 return ntohl(nfnl_get_data(nfad->data, NFQA_MARK, u_int32_t));
}
int nfq_get_timestamp(struct nfq_data *nfad, struct timeval *tv)
{
 struct nfqnl_msg_packet_timestamp *qpt;
 qpt = nfnl_get_pointer_to_data(nfad->data, NFQA_TIMESTAMP,
     struct nfqnl_msg_packet_timestamp);
 if (!qpt)
  return -1;
 tv->tv_sec = __be64_to_cpu(qpt->sec);
 tv->tv_usec = __be64_to_cpu(qpt->usec);
 return 0;
}
/* all nfq_get_*dev() functions return 0 if not set, since linux学习 only allows
 * ifindex >= 1, see net/core/dev.c:2600  (in 2.6.13.1) */
u_int32_t nfq_get_indev(struct nfq_data *nfad)
{
 return ntohl(nfnl_get_data(nfad->data, NFQA_IFINDEX_INDEV, u_int32_t));
}
u_int32_t nfq_get_physindev(struct nfq_data *nfad)
{
 return ntohl(nfnl_get_data(nfad->data, NFQA_IFINDEX_PHYSINDEV, u_int32_t));
}
u_int32_t nfq_get_outdev(struct nfq_data *nfad)
{
 return ntohl(nfnl_get_data(nfad->data, NFQA_IFINDEX_OUTDEV, u_int32_t));
}
u_int32_t nfq_get_physoutdev(struct nfq_data *nfad)
{
 return ntohl(nfnl_get_data(nfad->data, NFQA_IFINDEX_PHYSOUTDEV, u_int32_t));
}
struct nfqnl_msg_packet_hw *nfq_get_packet_hw(struct nfq_data *nfad)
{
 return nfnl_get_pointer_to_data(nfad->data, NFQA_HWADDR,
     struct nfqnl_msg_packet_hw);
}
int nfq_get_payload(struct nfq_data *nfad, char **data)
{
 *data = nfnl_get_pointer_to_data(nfad->data, NFQA_PAYLOAD, char);
 if (*data)
  return NFA_PAYLOAD(nfad->data[NFQA_PAYLOAD-1]);
 return -1;
}

2.4 程序实例
/* nfqnl_test.c */

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <netinet/in.h>
#include <linux/netfilter.h>        /* for NF_ACCEPT */
#include <libnetfilter_queue/libnetfilter_queue.h>
/* returns packet id */
// 对数据包的处理函数, 本示例仅用于打印数据包的信息
static u_int32_t print_pkt (struct nfq_data *tb)
{
    int id = 0;
    struct nfqnl_msg_packet_hdr *ph;
    u_int32_t mark,ifi;
    int ret;
    char *data;
// 提取数据包头信息,包括id,协议和hook点信息
    ph = nfq_get_msg_packet_hdr(tb);
    if (ph){
        id = ntohl(ph->packet_id);
        printf("hw_protocol=0x%04x hook=%u id=%u ",
            ntohs(ph->hw_protocol), ph->hook, id);
    }
// 获取数据包的mark值, 也就是内核skb的nfmark值
    mark = nfq_get_nfmark(tb);
    if (mark)
        printf("mark=%u ", mark);
// 获取数据包的进入网卡的索引号
    ifi = nfq_get_indev(tb);
    if (ifi)
        printf("indev=%u ", ifi);
// 获取数据包的发出网卡的索引号
    ifi = nfq_get_outdev(tb);
    if (ifi)
        printf("outdev=%u ", ifi);
// 获取数据包载荷,data指针指向载荷,从实际的IP头开始
    ret = nfq_get_payload(tb, &data);
    if (ret >= 0)
        printf("payload_len=%d ", ret);
    fputc('/n', stdout);
   
    return id;
}  
   
// 回调函数定义, 基本结构是先处理包,然后返回裁定
static int cb(struct nfq_q_handle *qh, struct nfgenmsg *nfmsg,
          struct nfq_data *nfa, void *data)
{      
// 数据包处理
    u_int32_t id = print_pkt(nfa);
    printf("entering callback/n");
// 设置裁定
    return nfq_set_verdict(qh, id, NF_ACCEPT, 0, NULL);
}
   
int main(int argc, char **argv)
{
    struct nfq_handle *h;
    struct nfq_q_handle *qh;
    struct nfnl_handle *nh;
    int fd;
    int rv;
    char buf[4096];
    printf("opening library handle/n");
// 打开nfq_handle
    h = nfq_open();
    if (!h) {
        fprintf(stderr, "error during nfq_open()/n");
        exit(1);
    }
    printf("unbinding existing nf_queue handler for AF_INET (if any)/n");
// 先解开和AF_INET的绑定
    if (nfq_unbind_pf(h, AF_INET) < 0) {
        fprintf(stderr, "error during nfq_unbind_pf()/n");
        exit(1);
    }
    printf("binding nfnetlink_queue as nf_queue handler for AF_INET/n");
// 绑定到AF_INET
    if (nfq_bind_pf(h, AF_INET) < 0) {
        fprintf(stderr, "error during nfq_bind_pf()/n");
        exit(1);
    }
    printf("binding this socket to queue '0'/n");
// 建立nfq_q_handle, 号码是0, 回调函数是cb
// 可建立多个queue,用不同的号码区分即可
    qh = nfq_create_queue(h,  0, &cb, NULL);
    if (!qh) {
        fprintf(stderr, "error during nfq_create_queue()/n");
        exit(1);
    }
   
    printf("setting copy_packet mode/n");
// 设置数据拷贝模式, 全包拷贝
    if (nfq_set_mode(qh, NFQNL_COPY_PACKET, 0xffff) < 0) {
        fprintf(stderr, "can't set packet_copy mode/n");
        exit(1);
    }
   
    nh = nfq_nfnlh(h);
    fd = nfnl_fd(nh);
// 从netlink套接字接收数据
    while ((rv = recv(fd, buf, sizeof(buf), 0)) && rv >= 0) {
        printf("pkt received/n");
// 处理数据,最终会调用到相应的回调函数
        nfq_handle_packet(h, buf, rv);
    }  
       
    printf("unbinding from queue 0/n");
// 释放队列
    nfq_destroy_queue(qh);
   
#ifdef INSANE
    /* normally, applications SHOULD NOT issue this command, since
     * it detaches other programs/sockets from AF_INET, too ! */
    printf("unbinding from AF_INET/n");
    nfq_unbind_pf(h, AF_INET);
#endif
   
    printf("closing library handle/n");
// 关闭nfq_handle
    nfq_close(h);
    exit(0);
}

2.4 包装libipq
可用netlink_queue包装libipq,ipq就相当于是号码为0的一个nfqueue而已:
/* libipq_compat.c */
struct ipq_handle *ipq_create_handle(u_int32_t flags, u_int32_t protocol)
{
 int status;
 struct ipq_handle *h;
 h = (struct ipq_handle *)malloc(sizeof(struct ipq_handle));
 if (h == NULL) {
  ipq_errno = IPQ_ERR_HANDLE;
  return NULL;
 }
 
 memset(h, 0, sizeof(struct ipq_handle));
// 打开ipq的nfqueue handle
 h->nfqnlh = nfq_open();
 if (!h->nfqnlh) {
  ipq_errno = IPQ_ERR_SOCKET;
  goto err_free;
 }
// 绑定到PF_INET或PF_INET6 
        if (protocol == PF_INET)
  status = nfq_bind_pf(h->nfqnlh, PF_INET);
        else if (protocol == PF_INET6)
  status = nfq_bind_pf(h->nfqnlh, PF_INET6);
        else {
  ipq_errno = IPQ_ERR_PROTOCOL;
  goto err_close;
        }
 h->family = protocol;
 if (status < 0) {
  ipq_errno = IPQ_ERR_BIND;
  goto err_close;
 }
// 按号码0建立queue,无回调函数,数据包由ipq直接读后处理
 h->qh = nfq_create_queue(h->nfqnlh, 0, NULL, NULL);
 if (!h->qh) {
  ipq_errno = IPQ_ERR_BIND;
  goto err_close;
 }
 return h;
err_close:
 nfq_close(h->nfqnlh);
err_free:
 free(h);
 return NULL;
}
/*
 * No error condition is checked here at this stage, but it may happen
 * if/when reliable messaging is implemented.
 */
int ipq_destroy_handle(struct ipq_handle *h)
{
 if (h) {
  nfq_close(h->nfqnlh);
  free(h);
 }
 return 0;
}
int ipq_set_mode(const struct ipq_handle *h,
                 u_int8_t mode, size_t range)
{
 return nfq_set_mode(h->qh, mode, range);
}
/*
 * timeout is in microseconds (1 second is 1000000 (1 million) microseconds)
 *
 */
// ipq_read包装得有点疑问,实际没进行接收操作,需要显式的recv接收数据包
// 现在的ipq_read只是对接收的数据进行解析
ssize_t ipq_read(const struct ipq_handle *h,
                 unsigned char *buf, size_t len, int timeout)
{
 struct nfattr *tb[NFQA_MAX];
 struct nlmsghdr *nlh = (struct nlmsghdr *)buf;
 struct nfgenmsg *msg = NULL;
 struct nfattr *nfa;
 //return ipq_netlink_recvfrom(h, buf, len, timeout);
 
 /* This really sucks.  We have to copy the whole packet
  * in order to build a data structure that is compatible to
  * the old ipq interface... */
 nfa = nfnl_parse_hdr(nfq_nfnlh(h->nfqnlh), nlh, &msg);
 if (!msg || !nfa)
  return 0;
 if (msg->nfgen_family != h->family)
  return 0;
 
 nfnl_parse_attr(tb, NFQA_MAX, nfa, 0xffff);

 return 0;
}
int ipq_message_type(const unsigned char *buf)
{
 return ((struct nlmsghdr*)buf)->nlmsg_type;
}
int ipq_get_msgerr(const unsigned char *buf)
{
 struct nlmsghdr *h = (struct nlmsghdr *)buf;
 struct nlmsgerr *err = (struct nlmsgerr*)NLMSG_DATA(h);
 return -err->error;
}
ipq_packet_msg_t *ipq_get_packet(const unsigned char *buf)
{
 return NLMSG_DATA((struct nlmsghdr *)(buf));
}
int ipq_set_verdict(const struct ipq_handle *h,
                    ipq_id_t id,
                    unsigned int verdict,
                    size_t data_len,
                    unsigned char *buf)
{
 return nfq_set_verdict(h->qh, id, verdict, data_len, buf);
}
/* Not implemented yet */
int ipq_ctl(const struct ipq_handle *h, int request, ...)
{
 return 1;
}
char *ipq_errstr(void)
{
 return ipq_strerror(ipq_errno);
}
void ipq_perror(const char *s)
{
 if (s)
  fputs(s, stderr);
 else
  fputs("ERROR", stderr);
 if (ipq_errno)
  fprintf(stderr, ": %s", ipq_errstr());
 if (errno)
  fprintf(stderr, ": %s", strerror(errno));
 fputc('/n', stderr);
}

...... 待续 ......

发表于: 2006-11-13,修改于: 2006-11-13 09:27,已浏览1646次,有评论2条 推荐 投诉
网友: wolf_jack@163.com 时间:2007-10-16 17:09:52 IP地址:203.187.169.★
 
 
 
如文,从用户空间到内核的路还是只有一条,请问,nf_queue和ip_queue的关系到底是怎样的?2.6.14仍然支持ipq,并可用libipq开发用户空间程序,那么nf_queue的架构在其中做了什么呢?非常感谢你在BLOG做作的精彩评述:)

 
网友: yfydz 时间:2007-10-17 08:48:03 IP地址:218.247.216.★
 
 
 
本blog有专门文章比较这两个的,自己找吧
 
  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值