iOS利用摄像头获取环境光感参数

 
 

  
  
不多说，代码如下：   

  
  
#import "LightSensitiveViewController.h"

@import AVFoundation;

#import <ImageIO/ImageIO.h>

@interface LightSensitiveViewController ()< AVCaptureVideoDataOutputSampleBufferDelegate>

@property (nonatomic, strong) AVCaptureSession *session;

@end

@implementation LightSensitiveViewController

- (void)viewDidLoad {
    [super viewDidLoad];
    // Do any additional setup after loading the view.
    self.view.backgroundColor = [UIColor whiteColor];

    self.navigationItem.title = @"光感";
    [self lightSensitive];
}

- (void)didReceiveMemoryWarning {
    [super didReceiveMemoryWarning];
    // Dispose of any resources that can be recreated.
}

#pragma mark- 光感
- (void)lightSensitive {

    // 1.获取硬件设备
    AVCaptureDevice *device = [AVCaptureDevice defaultDeviceWithMediaType:AVMediaTypeVideo];

    // 2.创建输入流
    AVCaptureDeviceInput *input = [[AVCaptureDeviceInput alloc]initWithDevice:device error:nil];

    // 3.创建设备输出流
    AVCaptureVideoDataOutput *output = [[AVCaptureVideoDataOutput alloc] init];
    [output setSampleBufferDelegate:self queue:dispatch_get_main_queue()];


    // AVCaptureSession属性
    self.session = [[AVCaptureSession alloc]init];
    // 设置为高质量采集率
    [self.session setSessionPreset:AVCaptureSessionPresetHigh];
    // 添加会话输入和输出
    if ([self.session canAddInput:input]) {
        [self.session addInput:input];
    }
    if ([self.session canAddOutput:output]) {
        [self.session addOutput:output];
    }

    // 9.启动会话
    [self.session startRunning];

}

#pragma mark- AVCaptureVideoDataOutputSampleBufferDelegate的方法
- (void)captureOutput:(AVCaptureOutput *)captureOutput didOutputSampleBuffer:(CMSampleBufferRef)sampleBuffer fromConnection:(AVCaptureConnection *)connection {

    CFDictionaryRef metadataDict = CMCopyDictionaryOfAttachments(NULL,sampleBuffer, kCMAttachmentMode_ShouldPropagate);
    NSDictionary *metadata = [[NSMutableDictionary alloc] initWithDictionary:(__bridge NSDictionary*)metadataDict];
    CFRelease(metadataDict);
    NSDictionary *exifMetadata = [[metadata objectForKey:(NSString *)kCGImagePropertyExifDictionary] mutableCopy];
    float brightnessValue = [[exifMetadata objectForKey:(NSString *)kCGImagePropertyExifBrightnessValue] floatValue];

    NSLog(@"%f",brightnessValue);


    // 根据brightnessValue的值来打开和关闭闪光灯
    AVCaptureDevice *device = [AVCaptureDevice defaultDeviceWithMediaType:AVMediaTypeVideo];
    BOOL result = [device hasTorch];// 判断设备是否有闪光灯
    if ((brightnessValue < 0) && result) {// 打开闪光灯

        [device lockForConfiguration:nil];

        [device setTorchMode: AVCaptureTorchModeOn];//开

        [device unlockForConfiguration];

    }else if((brightnessValue > 0) && result) {// 关闭闪光灯

        [device lockForConfiguration:nil];
        [device setTorchMode: AVCaptureTorchModeOff];//关
        [device unlockForConfiguration];

    }

}

@end
  
  
  注意点：   
  
  
首先引入AVFoundation框架和ImageIO/ImageIO.h声明文件   
遵循AVCaptureVideoDataOutputSampleBufferDelegate协议  
AVCaptureSession对象要定义为属性，确保有对象在一直引用AVCaptureSession对象；否则如果在lightSensitive方法中定义并初始化AVCaptureSession对象，会造成AVCaptureSession对象提前释放，    [self.session startRunning];会失效   
实现AVCaptureVideoDataOutputSampleBufferDelegate的代理方法，参数brightnessValue就是周围环境的亮度参数了，范围大概在-5~~12之间,参数数值越大，环境越亮