Integrating Visual Studio Team System 2008 Unit Tests with CruiseControl.NET

 

转自:http://www.codeproject.com/KB/tips/VSTS2008_Tests_With_CCNET.aspx

Introduction

Recently I had to work on a project that used VSTS unit tests and we needed to integrate the tests into our continuous integration process. We were using cruise control.NET. After doing a lot of research on the Web, I decided to write this small article since there is little information on the subject. This article assumes that you have already created a working continuous integration environment with CCNET for your Visual Studio 2008 project.

Executing the Unit Tests

You can use the command line test runner tool MSTest.exe to run your unit tests from CCNET. This requires that you install Visual Studio 2008 on the continuous integration server.

For example, the following command line can be used to execute the unit tests contained in the TestAssembly.dll and store the test results into results.xml.

Collapse Copy Code
MSTest.exe /testcontainer:TestAssembly.dll
/resultsfile:results.xml 

One problem with MSTest is that it complains if the results file already exists. To avoid this, you have to delete the results file before calling MSTest. We can create a batch file in the projects working directory to do this, let’s call it RunTests.bat.

Collapse Copy Code
del results.xml
MSTest.exe /testcontainer:<PathtoTestProject>/Bin/Debug/TestAssembly.dll
/resultsfile:results.xml

You need to replace <PathToTestProject> with the absolute path of your unit test project and make sure the path to MSTest.exe is added to the system path. Everytime this batch file runs, it will delete the results.xml in the working directory and call MSTest that in turn will run the tests and create a new results file.

Now we need to call this batch file from CCNET. Open your ccnet.config file and insert an exec task just after the msbuild task that builds your project as given below:

Collapse Copy Code
<tasks>
    <msbuild>...</msbuild>
    <exec> 
        <executable>{WorkingDirectory}/RunTests.bat</executable>
        <baseDirectory>{WorkingDirectory}</baseDirectory>
    </exec>
</tasks>

Including the Results in the Build Report

First we need to merge the results.xml file to the build log. To do that, update the publishers section of the ccnet.config file as given below:

Collapse Copy Code
<publishers> 
    <merge>
    <files>
        <file>{WorkingDirectory}/results.xml</file>
    </files> 
    </merge>
    ... 
</publishers> 

To include the unit test results in the build report, we need XSL files to generate the appropriate HTML. Unfortunately the XSL files supplied with CruiseControl as of version 1.4.0.3172 do not support the output format generated by MSTest version 9. I have created 2 XSL files called MSTest9Report.xsl and MSTest9Summary.xsl that are available in the download. These files are based on the MSTestReport.xsl and MSTestSummary.xsl distributed with CCNET version 1.4.0.3172.

Download and copy the files to the /CruiseControl.NET/server/xsl folder and /CruiseControl.NET/webdashboard/xsl folders. Then modify the ccservice.exe.config (or ccnet.exe.config if you use ccnet.exe instead of the ccservice) file by modifying the xslFiles section as given below:

Collapse Copy Code
<xslFiles>
    <file name="xsl/header.xsl"/>
    <file name="xsl/compile.xsl"/>
    <file name="xsl/mstest9summary.xsl"/>
    <file name="xsl/modifications.xsl"/>
</xslFiles>

In the above section, I have removed the unittests.xsl which is there by default and added mstest9summary.xsl instead.

Now we need to configure the Web dashboard. Open the dashboard.config file and update the buildPlugins section as given below:

Collapse Copy Code
   <buildPlugins>
      <buildReportBuildPlugin>
        <xslFileNames>
          <xslFile>xsl/header.xsl</xslFile>
          <xslFile>xsl/modifications.xsl</xslFile>
          <xslFile>xsl/compile.xsl</xslFile>
          <xslFile>xsl/MsTest9Summary.xsl</xslFile>
          <xslFile>xsl/fxcop-summary.xsl</xslFile>
          <xslFile>xsl/NCoverSummary.xsl</xslFile>
          <xslFile>xsl/SimianSummary.xsl</xslFile>
          <xslFile>xsl/fitnesse.xsl</xslFile>
        </xslFileNames>
      </buildReportBuildPlugin>
      <buildLogBuildPlugin />

      <xslReportBuildPlugin description="MSTest Report" actionName="MSTESTReport" 
            xslFileName="xsl/MsTestReport.xsl"/>  

Again, I have removed the unittestsummary.xsl and added mstest9summary instead. The new xslReportBuildPlugin element causes a link to be displayed on the left side called “MSTest Report”, and when clicked it will display the detailed test results in a table.

Conclusion

That's it, now restart your ccservice and your VSTS unit tests should be fully integrated with cruise control. The XSL files supplied displays the Test Name, Outcome, Duration, Message and the Stack Trace but they can be easily modified to display additional information available in the test results.

History

  • 17th April, 2008: Initial post

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)

About the Author

chamindu



Occupation: Software Developer
Location: Sri Lanka Sri Lanka

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值