Linux编程之错误码

在CentOS系统下,

vi /usr/include/asm-generic/errno-base.h

#define	EPERM		 1	/* Operation not permitted */
#define	ENOENT		 2	/* No such file or directory */
#define	ESRCH		 3	/* No such process */
#define	EINTR		 4	/* Interrupted system call */
#define	EIO		 5	/* I/O error */
#define	ENXIO		 6	/* No such device or address */
#define	E2BIG		 7	/* Argument list too long */
#define	ENOEXEC		 8	/* Exec format error */
#define	EBADF		 9	/* Bad file number */
#define	ECHILD		10	/* No child processes */
#define	EAGAIN		11	/* Try again */
#define	ENOMEM		12	/* Out of memory */
#define	EACCES		13	/* Permission denied */
#define	EFAULT		14	/* Bad address */
#define	ENOTBLK		15	/* Block device required */
#define	EBUSY		16	/* Device or resource busy */
#define	EEXIST		17	/* File exists */
#define	EXDEV		18	/* Cross-device link */
#define	ENODEV		19	/* No such device */
#define	ENOTDIR		20	/* Not a directory */
#define	EISDIR		21	/* Is a directory */
#define	EINVAL		22	/* Invalid argument */
#define	ENFILE		23	/* File table overflow */
#define	EMFILE		24	/* Too many open files */
#define	ENOTTY		25	/* Not a typewriter */
#define	ETXTBSY		26	/* Text file busy */
#define	EFBIG		27	/* File too large */
#define	ENOSPC		28	/* No space left on device */
#define	ESPIPE		29	/* Illegal seek */
#define	EROFS		30	/* Read-only file system */
#define	EMLINK		31	/* Too many links */
#define	EPIPE		32	/* Broken pipe */
#define	EDOM		33	/* Math argument out of domain of func */
#define	ERANGE		34	/* Math result not representable */

vi /usr/include/asm-generic/errno.h

#define	EDEADLK		35	/* Resource deadlock would occur */
#define	ENAMETOOLONG	36	/* File name too long */
#define	ENOLCK		37	/* No record locks available */
#define	ENOSYS		38	/* Function not implemented */
#define	ENOTEMPTY	39	/* Directory not empty */
#define	ELOOP		40	/* Too many symbolic links encountered */
#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
#define	ENOMSG		42	/* No message of desired type */
#define	EIDRM		43	/* Identifier removed */
#define	ECHRNG		44	/* Channel number out of range */
#define	EL2NSYNC	45	/* Level 2 not synchronized */
#define	EL3HLT		46	/* Level 3 halted */
#define	EL3RST		47	/* Level 3 reset */
#define	ELNRNG		48	/* Link number out of range */
#define	EUNATCH		49	/* Protocol driver not attached */
#define	ENOCSI		50	/* No CSI structure available */
#define	EL2HLT		51	/* Level 2 halted */
#define	EBADE		52	/* Invalid exchange */
#define	EBADR		53	/* Invalid request descriptor */
#define	EXFULL		54	/* Exchange full */
#define	ENOANO		55	/* No anode */
#define	EBADRQC		56	/* Invalid request code */
#define	EBADSLT		57	/* Invalid slot */

#define	EDEADLOCK	EDEADLK

#define	EBFONT		59	/* Bad font file format */
#define	ENOSTR		60	/* Device not a stream */
#define	ENODATA		61	/* No data available */
#define	ETIME		62	/* Timer expired */
#define	ENOSR		63	/* Out of streams resources */
#define	ENONET		64	/* Machine is not on the network */
#define	ENOPKG		65	/* Package not installed */
#define	EREMOTE		66	/* Object is remote */
#define	ENOLINK		67	/* Link has been severed */
#define	EADV		68	/* Advertise error */
#define	ESRMNT		69	/* Srmount error */
#define	ECOMM		70	/* Communication error on send */
#define	EPROTO		71	/* Protocol error */
#define	EMULTIHOP	72	/* Multihop attempted */
#define	EDOTDOT		73	/* RFS specific error */
#define	EBADMSG		74	/* Not a data message */
#define	EOVERFLOW	75	/* Value too large for defined data type */
#define	ENOTUNIQ	76	/* Name not unique on network */
#define	EBADFD		77	/* File descriptor in bad state */
#define	EREMCHG		78	/* Remote address changed */
#define	ELIBACC		79	/* Can not access a needed shared library */
#define	ELIBBAD		80	/* Accessing a corrupted shared library */
#define	ELIBSCN		81	/* .lib section in a.out corrupted */
#define	ELIBMAX		82	/* Attempting to link in too many shared libraries */
#define	ELIBEXEC	83	/* Cannot exec a shared library directly */
#define	EILSEQ		84	/* Illegal byte sequence */
#define	ERESTART	85	/* Interrupted system call should be restarted */
#define	ESTRPIPE	86	/* Streams pipe error */
#define	EUSERS		87	/* Too many users */
#define	ENOTSOCK	88	/* Socket operation on non-socket */
#define	EDESTADDRREQ	89	/* Destination address required */
#define	EMSGSIZE	90	/* Message too long */
#define	EPROTOTYPE	91	/* Protocol wrong type for socket */
#define	ENOPROTOOPT	92	/* Protocol not available */
#define	EPROTONOSUPPORT	93	/* Protocol not supported */
#define	ESOCKTNOSUPPORT	94	/* Socket type not supported */
#define	EOPNOTSUPP	95	/* Operation not supported on transport endpoint */
#define	EPFNOSUPPORT	96	/* Protocol family not supported */
#define	EAFNOSUPPORT	97	/* Address family not supported by protocol */
#define	EADDRINUSE	98	/* Address already in use */
#define	EADDRNOTAVAIL	99	/* Cannot assign requested address */
#define	ENETDOWN	100	/* Network is down */
#define	ENETUNREACH	101	/* Network is unreachable */
#define	ENETRESET	102	/* Network dropped connection because of reset */
#define	ECONNABORTED	103	/* Software caused connection abort */
#define	ECONNRESET	104	/* Connection reset by peer */
#define	ENOBUFS		105	/* No buffer space available */
#define	EISCONN		106	/* Transport endpoint is already connected */
#define	ENOTCONN	107	/* Transport endpoint is not connected */
#define	ESHUTDOWN	108	/* Cannot send after transport endpoint shutdown */
#define	ETOOMANYREFS	109	/* Too many references: cannot splice */
#define	ETIMEDOUT	110	/* Connection timed out */
#define	ECONNREFUSED	111	/* Connection refused */
#define	EHOSTDOWN	112	/* Host is down */
#define	EHOSTUNREACH	113	/* No route to host */
#define	EALREADY	114	/* Operation already in progress */
#define	EINPROGRESS	115	/* Operation now in progress */
#define	ESTALE		116	/* Stale NFS file handle */
#define	EUCLEAN		117	/* Structure needs cleaning */
#define	ENOTNAM		118	/* Not a XENIX named type file */
#define	ENAVAIL		119	/* No XENIX semaphores available */
#define	EISNAM		120	/* Is a named type file */
#define	EREMOTEIO	121	/* Remote I/O error */
#define	EDQUOT		122	/* Quota exceeded */

#define	ENOMEDIUM	123	/* No medium found */
#define	EMEDIUMTYPE	124	/* Wrong medium type */
#define	ECANCELED	125	/* Operation Canceled */
#define	ENOKEY		126	/* Required key not available */
#define	EKEYEXPIRED	127	/* Key has expired */
#define	EKEYREVOKED	128	/* Key has been revoked */
#define	EKEYREJECTED	129	/* Key was rejected by service */

/* for robust mutexes */
#define	EOWNERDEAD	130	/* Owner died */
#define	ENOTRECOVERABLE	131	/* State not recoverable */

#define ERFKILL		132	/* Operation not possible due to RF-kill */

#define EHWPOISON	133	/* Memory page has hardware error */


  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
线程概念 什么是线程 LWP:light weight process 轻量级的进程,本质仍是进程(在Linux环境下) 进程:独立地址空间,拥有PCB 线程:也有PCB,但没有独立的地址空间(共享) 区别:在于是否共享地址空间。 独居(进程);合租(线程)。 Linux下: 线程:最小的执行单位 进程:最小分配资源单位,可看成是只有一个线程的进程。 Linux内核线程实现原理 类Unix系统中,早期是没有“线程”概念的,80年代才引入,借助进程机制实现出了线程的概念。因此在这类系统中,进程和线程关系密切。 1. 轻量级进程(light-weight process),也有PCB,创建线程使用的底层函数和进程一样,都是clone 2. 从内核里看进程和线程是一样的,都有各自不同的PCB,但是PCB中指向内存资源的三级页表是相同的 3. 进程可以蜕变成线程 4. 线程可看做寄存器和栈的集合 5. 在linux下,线程最是小的执行单位;进程是最小的分配资源单位 察看LWP号:ps –Lf pid 查看指定线程的lwp号。 三级映射:进程PCB --> 页目录(可看成数组,首地址位于PCB中) --> 页表 --> 物理页面 --> 内存单元 参考:《Linux内核源代码情景分析》 ----毛德操 对于进程来说,相同的地址(同一个虚拟地址)在不同的进程中,反复使用而不冲突。原因是他们虽虚拟址一样,但,页目录、页表、物理页面各不相同。相同的虚拟址,映射到不同的物理页面内存单元,最终访问不同的物理页面。 但!线程不同!两个线程具有各自独立的PCB,但共享同一个页目录,也就共享同一个页表和物理页面。所以两个PCB共享一个地址空间。 实际上,无论是创建进程的fork,还是创建线程的pthread_create,底层实现都是调用同一个内核函数clone。 如果复制对方的地址空间,那么就产出一个“进程”;如果共享对方的地址空间,就产生一个“线程”。 因此:Linux内核是不区分进程和线程的。只在用户层面上进行区分。所以,线程所有操作函数 pthread_* 是库函数,而非系统调用。 线程共享资源 1.文件描述符表 2.每种信号的处理方式 3.当前工作目录 4.用户ID和组ID 5.内存地址空间 (.text/.data/.bss/heap/共享库) 线程非共享资源 1.线程id 2.处理器现场和栈指针(内核栈) 3.独立的栈空间(用户空间栈) 4.errno变量 5.信号屏蔽字 6.调度优先级 线程优、缺点 优点: 1. 提高程序并发性 2. 开销小 3. 数据通信、共享数据方便 缺点: 1. 库函数,不稳定 2. 调试、编写困难、gdb不支持 3. 对信号支持不好 优点相对突出,缺点均不是硬伤。Linux下由于实现方法导致进程、线程差别不是很大。 线程控制原语 pthread_self函数 获取线程ID。其作用对应进程中 getpid() 函数。 pthread_t pthread_self(void); 返回值:成功:0; 失败:无! 线程ID:pthread_t类型,本质:在Linux下为无符号整数(%lu),其他系统中可能是结构体实现 线程ID是进程内部,识别标志。(两个进程间,线程ID允许相同) 注意:不应使用全局变量 pthread_t tid,在子线程中通过pthread_create传出参数来获取线程ID,而应使用pthread_self。 pthread_create函数 创建一个新线程。 其作用,对应进程中fork() 函数。 int pthread_create(pthread_t *thread, const pthread_attr_t *attr, void *(*start_routine) (void *), void *arg); 返回值:成功:0; 失败:错误号 -----Linux环境下,所有线程特点,失败均直接返回错误号。 参数: pthread_t:当前Linux中可理解为:typedef unsigned long int pthread_t; 参数1:传出参数,保存系统为我们分配好的线程ID 参数2:通常传NULL,表示使用线程默认属性。若想使用具体属性也可以修改该参数。 参数3:函数指针,指向线程主函数(线程体),该函数运行结束,则线程结束。 参数4:线程主函数执行期间所使用的参数。 在一个线程中调用pthread_create()创建新的线程后,当前线程从pthread_create()返回继续往下执行,而新的线程所执行的代码由我们传给pthread_create的函数指针start_routine决定。star

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值