自定义博客皮肤VIP专享

*博客头图:

格式为PNG、JPG,宽度*高度大于1920*100像素,不超过2MB,主视觉建议放在右侧,请参照线上博客头图

请上传大于1920*100像素的图片!

博客底图:

图片格式为PNG、JPG,不超过1MB,可上下左右平铺至整个背景

栏目图:

图片格式为PNG、JPG,图片宽度*高度为300*38像素,不超过0.5MB

主标题颜色:

RGB颜色,例如:#AFAFAF

Hover:

RGB颜色,例如:#AFAFAF

副标题颜色:

RGB颜色,例如:#AFAFAF

自定义博客皮肤

-+
  • 博客(65)
  • 收藏
  • 关注

原创 ESP8266 固件模型(AP模式 、STA模式 )

ESP8266 固件模型(AP模式、STA模式)

2024-07-12 00:28:21 710

原创 ESP8266 Soft WDT reset

ESP8266 Soft WDT reset

2024-07-10 00:14:38 250

原创 Mini2440 start.s 修改支持串口输出,方便调试 (四)

经常会遇到点板子的时候,板子没有任何反应!怎么知道板子有没有在正常启动,在uboot阶段 start.s 中加入串口打印信息是很有必要的!

2024-06-20 23:23:28 740

原创 Qemu 模拟 Mini2440 扩展SDRAM 64M 到 128M,256M(三)

​MINI2440 板子的内存是由两片64M大小的SDRAM组成,所以实际内存有128M。分别连接到芯片的BANK6和BANK7。从这个图可以看出Mini2440 最大支持的SDRAM 是128M+128M,我们能不能利用 QEMU 直接给你模拟干满到 256M呢?各位看官看我的操作!

2024-06-19 00:38:43 617

原创 Qemu 模拟 Mini2440 修改uboot分区大小、增加分区并成功启动(二)

Qemu 模拟 Mini2440 修改uboot分区大小并成功启动(二)

2024-06-17 23:37:35 613

原创 如何让 uboot启动时自动执行指令?(执行“mtdparts default”命令)

如何让 uboot启动时自动执行指令?(执行“mtdparts default”命令)

2024-06-12 21:30:43 367

原创 uboot 移植显示FCLK、HCLK、PCLK 信息?

uboot 移植显示FCLK、HCLK、PCLK 信息?

2024-06-04 23:44:33 222

原创 CONFIG_BOOTCOMMAND “nboot kernel; bootm“ 如何实现开机自启动?

CONFIG_BOOTCOMMAND "nboot kernel; bootm"

2024-06-03 22:24:43 418

原创 Qemu源码是如何 模拟 Mini2440 硬件资源分析(一)

Qemu Mini2440 源码分析

2024-05-30 23:58:07 140

原创 u-boot: could not find output section .gnu.hash

u-boot: could not find output section .gnu.hash final link failed: Nonrepresentable section on output

2024-05-21 23:53:34 811

原创 有用的C 预定义的宏:__DATE__,__TIME__,__FILE__,__LINE__

有用的C 预定义的宏:__DATE__,__TIME__,__FILE__,__LINE__

2024-05-07 22:01:09 370

原创 如此建立网络根文件系统 Mount NFS RootFS

如此建立网络根文件系统 Mount NFS RootFS

2024-04-27 18:54:11 269

原创 error while loading shared libraries: libstdc++.so.6

error while loading shared libraries: libstdc++.so.6

2024-04-27 18:04:22 376

原创 qemu: fatal: RAM or ROM at 0x34000000?将编译好的 u-boot.bin 拷贝到 qemu/mini2440 的文件夹中去?

将编译好的 u-boot.bin 拷贝到 qemu/mini2440 的文件夹中去, 否则以后执行。

2024-04-25 00:08:47 184

原创 移植 rootfs_qtopia_qt4-20100816 报错 Try to bring eth0 interface up......

移植 rootfs_qtopia_qt4-20100816 报错 Try to bring eth0 interface up......

2024-04-23 22:02:57 555

原创 移植 rootfs_qtopia_qt4-20100816 报错 nfs: server 10.10.10.1 not responding, still trying

移植 rootfs_qtopia_qt4-20100816 报错 nfs: server 10.10.10.1 not responding, still trying

2024-04-23 21:58:14 236

原创 Could not initialize device ‘tap‘

Could not initialize device 'tap'

2024-04-22 21:30:23 193

原创 warning: could not configure /dev/net/tun: no virtual network emulationCould not initialize device

warning: could not configure /dev/net/tun: no virtual network emulationCould not initialize device 'tap'

2024-04-18 22:47:39 155

原创 三个晚上!给干废了!MINI2440 挂载 NFS

虚拟机执行:sudo ifconfig tap0 10.10.10.1 up。

2024-04-16 22:51:07 189

原创 s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapterAdvanced Linux Sound Architecture Driver Version 1.0.24.

目前是更换版本:arm-linux-gcc-4.9.3 --> arm-linux-gcc-4.4.3。

2024-04-16 20:01:12 373

原创 /usr/bin/ld: cannot find -lqt /usr/bin/ld: cannot find -lXext/usr/bin/ld: cannot find -lX11

办法:

2024-04-16 00:28:39 734

原创 /bin/sh: 1: arm-linux-g++: not found

/bin/sh: 1: arm-linux-g++: not found

2024-04-15 23:07:36 381

原创 QEMU MINI2440 如何设置显示分辨率?

QEMU MINI2440 如何设置显示分辨率?

2024-04-12 00:26:15 225

原创 MINI2440 开发板 给他干出来了

MINI2440 开发板 启动信息

2024-04-11 22:21:26 236

原创 Perhaps the file system was created with the wrong erase size? jffs2_scan_eraseblock(): 编译报错

Perhaps the file system was created with the wrong erase size? jffs2_scan_eraseblock(): 编译报错

2024-04-11 22:19:16 741

原创 “mkimage“ command not found - U-Boot images will not be built

"mkimage" command not found - U-Boot images will not be built

2024-04-10 23:23:18 172

原创 /usr/bin/ld: vl.o: undefined reference to symbol ‘timer_settime@@GLIBC_2.3.3‘

/usr/bin/ld: vl.o: undefined reference to symbol 'timer_settime@@GLIBC_2.3.3'

2024-04-09 23:24:26 135

原创 make[2]: texi2dvi: Command not found

make[2]: texi2dvi: Command not found

2024-04-08 23:31:50 258

原创 ubuntu 14.04 配置samba共享服务

ubuntu 14.04 配置samba共享服务

2024-04-08 22:25:10 316

原创 GIT fatal: The remote end hung up unexpectedly

GIT fatal: The remote end hung up unexpectedly

2024-04-08 21:46:34 250

原创 C/C++ __FILE__路径,只保留文件名

C/C++ __FILE__路径,只保留文件名

2024-04-01 21:08:51 277

原创 C/C++ kernel 文件读写 filp_open、file_write file_read

C/C++ kernel 文件读写 filp_open、file_write file_read

2023-12-28 19:05:14 327

原创 Android源码 native InputManager 与window窗体输入事件分析(完整版)

Android源码 native InputManager 与window窗体输入事件分析(完整版)

2023-10-20 18:45:48 319 1

原创 Android Camera2 流程解密

Android Camera2 流程解密

2023-10-18 19:09:37 145

原创 Kernel panic - not syncing: CFI failure

Kernel panic - not syncing: CFI failure

2023-09-15 16:15:23 1150 1

原创 一文明白 Android Camera2 启动、预览、拍照

https://liuhongwei.blog.csdn.net/article/details/109173826?spm=1001.2014.3001.5502

2023-09-12 15:18:15 372

转载 一文明白 Android JNI C/C++ 访问Java的属性、方法

一文明白 Android JNI C/C++ 访问Java的属性、方法

2023-09-01 14:44:46 106

转载 一文搞明白 Android R Input按键事件 前世今生

一文搞明白 Android R Input按键事件 前世今生

2023-08-28 18:46:59 234

转载 Android UI 对 SF Vsync注册与接收、SurfaceFlinger 对 Hwc2 Vsync接收与分发

Android UI 对 Vsync注册与接收、SurfaceFlinger 对 Vsync接收与分发

2023-08-15 19:29:21 242

转载 Android application 接受按键分发 流程分析

上面的方法主要作用就是将mClientChannel的mPtr属性赋值给outInputChannel,并将mClientChannel的mPtr赋值为NULL,这样就实现了将mClientChannel与outInputChannel互换,outInputChannel是ViewRootImpl的传递过来的mInputChannel,达到了将mClientChannel传递个应用客户端的目的。,应用端窗口处理完输入事件之后回调此方法。从java层传下来的。

2023-08-15 17:38:04 74

Android上层与驱动交互完整篇(APK->JNI->HAL->DRV)

直通式

2023-12-14

Android 调试背光亮度曲线-斜线

Android 调试背光亮度曲线-斜线

2023-07-04

Android13 增加 APP->JNI ->HAL

Android13 增加 APP->JNI ->HAL

2023-07-03

空空如也

TA创建的收藏夹 TA关注的收藏夹

TA关注的人

提示
确定要删除当前文章?
取消 删除