semget函数报错，errno设置为28

在函数运行时出错，查找日志发现semget函数报错，errno设置为28。遇到系统调用发生错误的情况，可以尝试以下几种思路：

1. 使用strerror函数或者perror函数输出错误说明。

2. 如果第一步还不是很清楚，可以根据errno的值找出对应的错误标示，然后再详细查阅出错系统函数的man手册，找到对应错误标示的含义。

PS：大部分时候还是需要采用方法2，例如这次semget函数报错，errno设置为28，我一开始根本不记得28的错误标示是什么，采用strerror函数返回的错误说明为“No space left on device”，我还误以为系统内存不够。最后通过查看errno.h头文件才发现28的错误标示是ENOSPC，再去查semget函数的man手册，查看ENOSPC的具体含义是信号量超出系统限制：A semaphore set has to be created but the system limit for the  maximum  number of  semaphore  sets  (SEMMNI),  or the system wide maximum number of semaphores。

解决办法：可以临时修改内核参数（当然这只是权宜之计，我们最好是找到为什么信号量会超出系统限制，因为正常情况下可能性不大。）

1）sysctl命令可以查看和设置系统内核参数

sysctl -a | grep sem        #查看系统信号量的设置值

kernel.sem = 250        32000   32      128

对应的4个值从左到右分别为SEMMSL、SEMMNS、SEMOPM和SEMMNI。

2）修改方法有三种：数字只作为参考

方法一：echo 610 86620 100 142 > /proc/sys/kernel/sem

方法二：sysctl -w kernel.sem="610 86620 100 142"

方法三：echo "kernel.sem=610 86620 100 142" >> /etc/sysctl.conf

errno的值对应的错误标示，定义在/usr/include/errno.h头文件中,但是该头文件也是包含其他头文件的。这些标示实际上是定义在下面两个头文件中：

/usr/include/asm-generic/errno-base.h

/usr/include/asm-generic/errno.h

这里列出部分errno的错误定义如下：

#define EPERM            1      /* Operation not permitted */
#define ENOENT           2      /* No such file or directory */
#define ESRCH            3      /* No such process */
#define EINTR            4      /* Interrupted system call */
#define EIO              5      /* I/O error */
#define ENXIO            6      /* No such device or address */
#define E2BIG            7      /* Argument list too long */
#define ENOEXEC          8      /* Exec format error */
#define EBADF            9      /* Bad file number */
#define ECHILD          10      /* No child processes */
#define EAGAIN          11      /* Try again */
#define ENOMEM          12      /* Out of memory */
#define EACCES          13      /* Permission denied */
#define EFAULT          14      /* Bad address */
#define ENOTBLK         15      /* Block device required */
#define EBUSY           16      /* Device or resource busy */
#define EEXIST          17      /* File exists */
#define EXDEV           18      /* Cross-device link */
#define ENODEV          19      /* No such device */
#define ENOTDIR         20      /* Not a directory */
#define EISDIR          21      /* Is a directory */
#define EINVAL          22      /* Invalid argument */
#define ENFILE          23      /* File table overflow */
#define EMFILE          24      /* Too many open files */
#define ENOTTY          25      /* Not a typewriter */
#define ETXTBSY         26      /* Text file busy */
#define EFBIG           27      /* File too large */
#define ENOSPC          28      /* No space left on device */
#define ESPIPE          29      /* Illegal seek */
#define EROFS           30      /* Read-only file system */
#define EMLINK          31      /* Too many links */
#define EPIPE           32      /* Broken pipe */
#define EDOM            33      /* Math argument out of domain of func */
#define ERANGE          34      /* Math result not representable */

#define EDEADLK         35      /* Resource deadlock would occur */
#define ENAMETOOLONG    36      /* File name too long */
#define ENOLCK          37      /* No record locks available */
#define ENOSYS          38      /* Function not implemented */
#define ENOTEMPTY       39      /* Directory not empty */
#define ELOOP           40      /* Too many symbolic links encountered */
#define EWOULDBLOCK     EAGAIN  /* Operation would block */
#define ENOMSG          42      /* No message of desired type */
#define EIDRM           43      /* Identifier removed */
#define ECHRNG          44      /* Channel number out of range */
#define EL2NSYNC        45      /* Level 2 not synchronized */
#define EL3HLT          46      /* Level 3 halted */
#define EL3RST          47      /* Level 3 reset */
#define ELNRNG          48      /* Link number out of range */
#define EUNATCH         49      /* Protocol driver not attached */
#define ENOCSI          50      /* No CSI structure available */
#define EL2HLT          51      /* Level 2 halted */
#define EBADE           52      /* Invalid exchange */
#define EBADR           53      /* Invalid request descriptor */
#define EXFULL          54      /* Exchange full */
#define ENOANO          55      /* No anode */
#define EBADRQC         56      /* Invalid request code */
#define EBADSLT         57      /* Invalid slot */

#define EDEADLOCK       EDEADLK

#define EBFONT          59      /* Bad font file format */
#define ENOSTR          60      /* Device not a stream */
#define ENODATA         61      /* No data available */
#define ETIME           62      /* Timer expired */
#define ENOSR           63      /* Out of streams resources */
#define ENONET          64      /* Machine is not on the network */
#define ENOPKG          65      /* Package not installed */
#define EREMOTE         66      /* Object is remote */
#define ENOLINK         67      /* Link has been severed */
#define EADV            68      /* Advertise error */
#define ESRMNT          69      /* Srmount error */
#define ECOMM           70      /* Communication error on send */
#define EPROTO          71      /* Protocol error */
#define EMULTIHOP       72      /* Multihop attempted */
#define EDOTDOT         73      /* RFS specific error */
#define EBADMSG         74      /* Not a data message */
#define EOVERFLOW       75      /* Value too large for defined data type */
#define ENOTUNIQ        76      /* Name not unique on network */
#define EBADFD          77      /* File descriptor in bad state */
#define EREMCHG         78      /* Remote address changed */
#define ELIBACC         79      /* Can not access a needed shared library */
#define ELIBBAD         80      /* Accessing a corrupted shared library */
#define ELIBSCN         81      /* .lib section in a.out corrupted */
#define ELIBMAX         82      /* Attempting to link in too many shared libraries */
#define ELIBEXEC        83      /* Cannot exec a shared library directly */
#define EILSEQ          84      /* Illegal byte sequence */
#define ERESTART        85      /* Interrupted system call should be restarted */
#define ESTRPIPE        86      /* Streams pipe error */
#define EUSERS          87      /* Too many users */
#define ENOTSOCK        88      /* Socket operation on non-socket */
#define EDESTADDRREQ    89      /* Destination address required */
#define EMSGSIZE        90      /* Message too long */
#define EPROTOTYPE      91      /* Protocol wrong type for socket */
#define ENOPROTOOPT     92      /* Protocol not available */
#define EPROTONOSUPPORT 93      /* Protocol not supported */
#define ESOCKTNOSUPPORT 94      /* Socket type not supported */
#define EOPNOTSUPP      95      /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT    96      /* Protocol family not supported */
#define EAFNOSUPPORT    97      /* Address family not supported by protocol */
#define EADDRINUSE      98      /* Address already in use */
#define EADDRNOTAVAIL   99      /* Cannot assign requested address */
#define ENETDOWN        100     /* Network is down */

#define ENETUNREACH     101     /* Network is unreachable */
#define ENETRESET       102     /* Network dropped connection because of reset */
#define ECONNABORTED    103     /* Software caused connection abort */
#define ECONNRESET      104     /* Connection reset by peer */
#define ENOBUFS         105     /* No buffer space available */
#define EISCONN         106     /* Transport endpoint is already connected */
#define ENOTCONN        107     /* Transport endpoint is not connected */
#define ESHUTDOWN       108     /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS    109     /* Too many references: cannot splice */
#define ETIMEDOUT       110     /* Connection timed out */
#define ECONNREFUSED    111     /* Connection refused */
#define EHOSTDOWN       112     /* Host is down */
#define EHOSTUNREACH    113     /* No route to host */
#define EALREADY        114     /* Operation already in progress */
#define EINPROGRESS     115     /* Operation now in progress */
#define ESTALE          116     /* Stale NFS file handle */
#define EUCLEAN         117     /* Structure needs cleaning */
#define ENOTNAM         118     /* Not a XENIX named type file */
#define ENAVAIL         119     /* No XENIX semaphores available */
#define EISNAM          120     /* Is a named type file */
#define EREMOTEIO       121     /* Remote I/O error */
#define EDQUOT          122     /* Quota exceeded */

#define ENOMEDIUM       123     /* No medium found */
#define EMEDIUMTYPE     124     /* Wrong medium type */
#define ECANCELED       125     /* Operation Canceled */
#define ENOKEY          126     /* Required key not available */
#define EKEYEXPIRED     127     /* Key has expired */
#define EKEYREVOKED     128     /* Key has been revoked */
#define EKEYREJECTED    129     /* Key was rejected by service */

/* for robust mutexes */
#define EOWNERDEAD      130     /* Owner died */
#define ENOTRECOVERABLE 131     /* State not recoverable */

#define ERFKILL         132     /* Operation not possible due to RF-kill */