MGRE环境下OFPS实验

题目

 

实验完成步骤

步骤一：

配置ip如下：

环回：

        AR1：192.168.1.1/24

        AR2：192.168.2.1/24

        AR3：192.168.3.1/24

        AR4：192.168.4.1/24

        AR5：192.168.5.1/24

网段：

        AR1-AR6:16.0.0.1/24

        AR1-AR6:61.0.0.1/24

        AR2-AR6:26.0.0.1/24

        AR3-AR6:36.0.0.1/24

        AR4-AR6:46.0.0.1/24

        AR5-AR6:56.0.0.1/24

虚拟网段：

        1.AR1-AR4-AR5：192.168.6.0/24

        2.AR1-AR2-AR3：192.168.7.0/24

步骤二：

配置缺省与nat：

AR1配置如下：

ip route-static 0.0.0.0 0 16.0.0.2
ip route-static 0.0.0.0 0 61.0.0.2
acl 2000
rule permit source 192.168.0.0 0.0.255.255
q
int g 0/0/0
nat outbound 2000
q
int g 0/0/1
nat outbound 2000

AR2配置：

ip route-static 0.0.0.0 0 26.0.0.2
acl 2000
rule permit source 192.168.0.0 0.0.255.255
q
int g 0/0/0
nat outbound 2000

AR3,AR4,AR5缺省指向分别为36.0.0.0        46.0.0.0       56.0.0.0其余指令一致

步骤三：

MGRE配置：

1，封装：

AR1:

int tunnel 0/0/0
ip ad 192.168.6.1 24
tunnel-protocol gre p2mp                        #定义封装类型
source 16.0.0.1                                       #出接口
nhrp network-id 100                                #创建域自动获取
nhrp entry multicast dynamic                 #开启微网络

AR4:

int tunnel 0/0/0
ip ad 192.168.6.2 24
tunnel-protocol gre p2mp
source 46.0.0.1
nhrp network-id 100
nhrp entry multicast dynamic

AR5:

int tunnel 0/0/0
ip ad 192.168.6.3 24
tunnel-protocol gre p2mp
source 56.0.0.1
nhrp network-id 100
nhrp entry multicast dynamic

配置完成图：

 

 

 

AR1:

int tunnel 0/0/0
nhrp entry 192.168.6.2 46.0.0.1 register
nhrp entry 192.168.6.3 56.0.0.1 register

AR2:

int tunnel 0/0/0
nhrp entry 192.168.6.1 16.0.0.1 register
nhrp entry 192.168.6.3 56.0.0.1 register

AR3:

int tunnel 0/0/0
nhrp entry 192.168.6.2 46.0.0.1 register
nhrp entry 192.168.6.1 16.0.0.1 register

2，AR1-AR2-AR3：

AR1:

int tunnel 0/0/1
ip ad 192.168.7.1 24
tunnel-protocol gre p2mp
source 61.0.0.1
nhrp network-id 101
nhrp entry multicast dynamic

AR2:

int tunnel 0/0/0
ip ad 192.168.7.2 24
tunnel-protocol gre p2mp
source g 0/0/0
nhrp network-id 101
nhrp entry 192.168.7.1 61.0.0.1

AR3:

int tunnel 0/0/0
ip ad 192.168.7.3 24
tunnel-protocol gre p2mp
source g 0/0/0
nhrp network-id 101
nhrp entry 192.168.7.1 61.0.0.1

配置完成如下：

 

 

 步骤三：

OSPF配置：

对AR1-AR4-AR3配置

AR1:

ospf 1 router-id 1.1.1.1
area 0
network 192.168.1.0 0.0.0.255
network 192.168.6.0 0.0.0.255
network 192.168.7.0 0.0.0.255
q
q
int tunnel 0/0/0
ospf network-type broadcast

AR4:

ospf 1 router-id 4.4.4.4
area 0
network 192.168.4.0 0.0.0.255
network 192.168.6.0 0.0.0.255
q
q
int tunnel 0/0/0
ospf network-type broadcast

AR5:

ospf 1 router-id 5.5.5.5
area 0
network 192.168.5.0 0.0.0.255
network 192.168.6.0 0.0.0.255
q
q
int tunnel 0/0/0
ospf network-type broadcast

再对AR1-AR2-AR3配置

AR1:

int tunnel 0/0/1
ospf network-type p2mp

AR2:

ospf 1 router-id 2.2.2.2
area 0
network 192.168.2.0 0.0.0.255
network 192.168.7.0 0.0.0.255
q
q
int tunnel 0/0/0
ospf network-type p2mp

AR3:

ospf 1 router-id 3.3.3.3
area 0
network 192.168.3.0 0.0.0.255
network 192.168.7.0 0.0.0.255
q
q
int tunnel 0/0/0
ospf network-type p2mp

完成图例：