Chapter 1. Overview
The JL5104B/JL5105B/JL5106B is a 4-port, 5-port, and 6-port Fast Ethernet (FE) switch , respectively,
with the JL5104B having 1 RMII interface, the儿5106B having 1 MII/ RMII interface, and the JL5105B not
having MII/RMII interface. They support Quality of Service (QoS) functions with 4-level priority queues .
that ensure the performance of a number of real-time network applications.
The JL5104B/JL5105B/JL5106B integrates a 2K-entry address lookup table and a 4-way associative hash
algorithm to validate input values, avoid hash collisions, and maintain forwarding performance. The
supported maximum length of a data packet is 4096 bytes. With three types of independent storm filters,
the JL5104B/JL5105B/JL5106B can filter packet storms. The JL5104B/JL5105B/儿L 5106B also integrates
an intelligent switch engine that solves the Head-of-Line (HOL) blocking problems.
The JL5104B/儿L 5105B/JL5106B supports 16 VLAN groups that can be configured as port-based VLANs
and/ or 802.1Q tag-based VL ANs.
1.1. Feature List
●Basic Switch Functions
。JL5104B has up to 3x10BASE-T/100BASE-TX Ethernet ports + 1 RMII port
。JL5105B has up to 5x10BASE-T/ 100BASE-TX Ethernet ports
。JL5106B has up to 5x10BASE-T/1OOBASE-TX Ethernet ports + 1 MII/RMII port
■Complies with IEEE 802.3/ 802.3u Auto-Negotiation
■Flow control in half-duplex and full-duplex modes
。Non-blocking wire-speed reception and transmission and non-HOL forwarding
。L2 switching with 2K-entry L2 MAC table, hash-based 4-way, 16-entry hash collision CAM, and 64-
entry L2 multicast table
。Jumbo frame support, up to 4096 bytes
。570K bits packet buffer and supports full mesh test from 64B to 1518B
。MIBs cover TX/ RX packet/bytes counter, UC/MC/Flood packet/bytes counter, packet CRC error
counter, and drop counter
●Quality of Service (QoS)
。Supports high-performance QoS function on each port
■4-level Priority Queues
■Weighted Round Robin service and Strict Priority
■1Q-based, Port-based, DSCP-based priority assignments
。Supports Queue Management Operations
■Disables scheduling of packets on a port
" Disables queuing new packets to a port
. Allows a port to be drained without sending out packets
■Allows one port traffic to be sent out to another port
●Allows checking whether a port is empty or not
●VLAN Functions
。16-entry VLAN groups
。Flexible 802.1Q port/tag-based VLAN
。16 VLANs are selected from a "cam-type-matching"
●Diagnostic Functions
。Supports hardware loop detection function with LEDs and buzzer to indicate the existence of a loop
。Flexible LED indicators
■Loop status indication
■LEDs blink upon reset for LED diagnostics
●Other Functions
。Supports Ingress/Egress port mirror
。Multicast/ Broadcast storm control with separate token buckets for flooding, broadcast, and
multicast packets
。Multicast/Broadcast storm control is either packet or byte-based, configurable per egress port
。32-entry L2 classification table for advanced application
。Physical layer port Polarity Detection and Correction function
,。Single 3.3V power input can be transformed by integrating LDO regulator to generate 1.1V from
3.3V via a low-cost external Diode
。25-MHz crystal or 3.3V OSC input
。JL5106B is provided in 64-pin QFN package for 6-port FE Switch.
。JL5104B/JL5105B is provided in 48-pin QFN package for 4-port/5-port FE Switch respectively.
1.2. Applications
●SOHO FE Switch
。JL5104B: 4-Port Switch (10BASE-T and 100BASE-TX)
。JL5105B: 5-Port Switch (10BASE-T and 100BASE-TX)
。JL5106B: 6-Port Switch (10BASE-T and 100BASE-TX)
●HomePNA/ HomePlug bridge
●Set-Top Box/TV