NOTE: This document is provided as legacy information from the Oracle 8i-9i Timeframe. Although commands in this document may still function, you are recommended to use articles designed specifically for later versions (if available).PURPOSE ------- The purpose of this document is to provide a few OS commands for UNIX operating systems to gather information about Physical Memory (RAM), swap memory,CPU usage and idle percentage, whether lots of processes are in the process run queue and whether too much paging and swapping going on in the server or not so that we can use the information along with Statspack report to help diagnose the Database Performance issues. Sometimes, the information gathered using these commands will be helpful in finding the most OS resource consuming database or non-database processes and will help in identifying the processes to further investigations about why the processes are consuming so much resources and whether the corresponding query or application needs to be tuned. SCOPE & APPLICATION ------------------- This document can be used by anyone with moderate expertise to run UNIX OS commands in various operating systems like Solaris, HP-UX, AIX, TRU64, Linux, etc. The commands will help us collect OS related information to verify whether overuse of any of the OS resources can be affecting the database performance or not. This document does not deal with OS Kernel tuning. How to use OS commands to diagnose Database Performance issues? ---------------------------------------------------------------- You want to gather data for Physical memory, Swap space, CPU % usage and idle, IO usage in the server in general and also to find a few most OS resouce consuming processes to get better understanding about how the UNIX server is performing and whether any of these resources are causing a bottleck in the database performance or not. Since the popular UNIX systems do not support the same commands or even same options for a command, we are proving different commands for different OS in the following section. Please refer to the corresponding OS man pages for detailed information about each UNIX command mentioned in this document. Solaris: ========= $ /usr/sbin/prtconf |grep -i "Memory size" $ swap -s $ df -k $ /usr/local/bin/top $ vmstat 5 100 $ sar -u 2 100 $ iostat -D 2 100 $ mpstat 5 100 Out of these commands, top command may not be installed in your server by default. In that case,you can get it for free from www.sunfreeware.com and install it preferably under /usr/local/bin directory and then use it. Please take a few snpshots of the top command output and store it in a file.It refreshes the output screen every 5 sec. Prtconf command will show how much Physical Memory (RAM) the Solaris server has. Swap command will provide us with the usage of swap space including the RAM. Df command will indicate how much space is free in each mount point and also provides information about swap space(s). Top command wil provide the above information plus information about top CPU consuming processes, CPU usage in the system, etc. Vmstat will provide information about process run queue, memory usage, paging and swapping and CPU % usage in the server. Different options in vmstat can provide more specific information, if required. Iostat provides IO usage by Disk, CPU % usage, etc. depending on the options used. Sar command with "-u" option also provides CPU usage and idle time information. Mpstat will provide CPU usage stats for a Solaris server with 1 or more CPUs. This command is very useful for multi-processor system to provide details about the CPU usage by every CPU in the server. For example: $ man vmstat Here is some sample output from these commands: $ prtconf |grep -i "Memory size" Memory size: 4096 Megabytes $ swap -s total: 7443040k bytes allocated + 997240k reserved = 8440280k used, 2777096k available $ df -k Filesystem kbytes used avail capacity Mounted on /dev/dsk/c0t0d0s0 4034392 2171569 1822480 55% / /proc 0 0 0 0% /proc fd 0 0 0 0% /dev/fd mnttab 0 0 0 0% /etc/mnttab /dev/dsk/c0t0d0s3 493688 231339 212981 53% /var swap 2798624 24 2798600 1% /var/run swap 6164848 3366248 2798600 55% /tmp /dev/vx/dsk/dcdg01/vol01 25165824 23188748 1970032 93% /u01 /dev/vx/dsk/dcdg01/vol02 33554432 30988976 2565456 93% /u02 ... $ top last pid: 29570; load averages: 1.00, 0.99, 0.95 10:19:19 514 processes: 503 sleeping, 4 zombie, 6 stopped, 1 on cpu CPU states: 16.5% idle, 17.9% user, 9.8% kernel, 55.8% iowait, 0.0% swap Memory: 4096M real, 46M free, 4632M swap in use, 3563M swap free PID USERNAME THR PRI NICE SIZE RES STATE TIME CPU COMMAND 29543 usupport 1 35 0 2240K 1480K cpu2 0:00 0.64% top-3.5b8-sun4u 13638 usupport 11 48 0 346M 291M sleep 14:00 0.28% oracle 13432 usupport 1 58 0 387M 9352K sleep 3:56 0.17% oracle 29285 usupport 10 59 0 144M 5088K sleep 0:04 0.15% java 13422 usupport 11 58 0 391M 3968K sleep 1:10 0.07% oracle 6532 usupport 1 58 0 105M 4600K sleep 0:33 0.06% oracle ... $ vmstat 5 100 procs memory page disk faults cpu r b w swap free re mf pi po fr de sr f0 s1 s1 s1 in sy cs us sy id 0 1 72 5746176 222400 0 0 0 0 0 0 0 0 11 9 9 4294967196 0 0 -19 -6 -103 0 0 58 2750504 55120 346 1391 491 1171 3137 0 36770 0 37 39 5 1485 4150 2061 18 8 74 0 0 58 2765520 61208 170 272 827 523 1283 0 3904 0 36 40 2 1445 2132 1880 1 3 96 0 0 58 2751440 58232 450 1576 424 1027 3073 0 12989 0 22 26 3 1458 4372 2035 17 7 76 0 3 58 2752312 51272 770 1842 1248 1566 4556 0 19121 0 67 66 12 2390 4408 2533 13 11 75 ... $ iostat -c 2 100 cpu us sy wt id 15 5 13 67 19 11 52 18 19 8 44 29 12 10 48 30 19 7 40 34 ... $ iostat -D 2 100 sd15 sd16 sd17 sd18 rps wps util rps wps util rps wps util rps wps util 7 4 9.0 6 3 8.6 5 3 8.1 0 0 0.0 4 22 16.5 8 41 37.9 0 0 0.7 0 0 0.0 19 34 37.0 20 24 37.0 12 2 10.8 0 0 0.0 20 20 29.4 24 37 51.3 3 2 5.3 0 0 0.0 28 20 40.8 24 20 42.3 1 0 1.7 0 0 0.0 ... $ mpstat 2 100 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 0 115 3 255 310 182 403 38 72 82 0 632 16 6 12 66 1 135 4 687 132 100 569 40 102 68 0 677 14 5 13 68 2 130 4 34 320 283 552 43 94 63 0 34 15 5 13 67 3 129 4 64 137 101 582 44 103 66 0 51 15 5 13 67 ... HP-UX 11.0: ============ $ grep Physical /var/adm/syslog/syslog.log $ df -k $ sar -w 2 100 $ sar -u 2 100 $ /bin/top $ vmstat -n 5 100 $ iostat 2 100 $ top For example: $ grep Physical /var/adm/syslog/syslog.log Nov 13 17:43:28 rmtdchp5 vmunix: Physical: 16777216 Kbytes, lockable: 13405388 Kbytes, available: 15381944 Kbytes $ sar -w 1 100 HP-UX rmtdchp5 B.11.00 A 9000/800 12/20/02 14:47:20 swpin/s bswin/s swpot/s bswot/s pswch/s 14:47:21 0.00 0.0 0.00 0.0 1724 14:47:22 0.00 0.0 0.00 0.0 1458 14:47:23 0.00 0.0 0.00 0.0 1999 14:47:24 0.00 0.0 0.00 0.0 1846 ... $ sar -u 2 100 # This command generates CPU % usage information. HP-UX rmtdchp5 B.11.00 A 9000/800 12/20/02 14:48:02 %usr %sys %wio %idle 14:48:04 20 2 1 77 14:48:06 1 1 0 98 ... $ iostat 2 100 device bps sps msps c1t2d0 36 7.4 1.0 c2t2d0 32 5.6 1.0 c1t0d0 0 0.0 1.0 c2t0d0 0 0.0 1.0 ... AIX: ======= $ /usr/sbin/lsattr -E -l sys0 -a realmem $ /usr/sbin/lsps -s $ vmstat 5 100 $ iostat 2 100 $ /usr/local/bin/top # May not be installed by default in the server For example: $ /usr/sbin/lsattr -E -l sys0 -a realmem realmem 33554432 Amount of usable physical memory in Kbytes False NOTE: This is the total Physical + Swap memory in the system. Use top or monitor command to get better breakup of the memory. $ /usr/sbin/lsps -s Total Paging Space Percent Used 30528MB 1% Linux [RedHat 7.1 and RedHat AS 2.1]: ======================================= $ dmesg | grep Memory $ vmstat 5 100 $ /usr/bin/top For example: $ dmesg | grep Memory Memory: 1027812k/1048568k available (1500k kernel code, 20372k reserved, 103k d)$ /sbin/swapon -s Tru64: ======== $ vmstat -P| grep -i "Total Physical Memory =" $ /sbin/swapon -s $ vmstat 5 100 For example: $ vmstat -P| grep -i "Total Physical Memory =" Total Physical Memory = 8192.00 M $ /sbin/swapon -s Swap partition /dev/disk/dsk1g (default swap): Allocated space: 2072049 pages (15.81GB) In-use space: 1 pages ( 0%) Free space: 2072048 pages ( 99%) Total swap allocation: Allocated space: 2072049 pages (15.81GB) Reserved space: 864624 pages ( 41%) In-use space: 1 pages ( 0%) Available space: 1207425 pages ( 58%) Please take at least 10 snapshots of the "top" command to get an idea aboud most OS resource comsuming processes in the server and the different snapshot might contain a few different other processes and that will indicate that the use of resouces are varying pretty quickly amound many processes. RELATED DOCUMENTS ----------------- Note:1016233.6 : How to Display the Amount of Physical Memory and Swap Space on UNIX Systems Man pages on vmstat, iostat, mpstat, sar, df, dmesg, perfstat, lsps, lsattr, swapon, etc. from relevant OS manuals. @NOTE to reviewer: This note has been created as part of PAA Perf. action ID: 21175. @This note will complete this PAA action.
How to use OS commands to diagnose Database Performance issues? (文档 ID 224176.1)
最新推荐文章于 2020-07-14 14:12:41 发布
扫一扫
883
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
