# Other default tuning values #其他默认调优值
# MySQL Server Instance Configuration File #MySQL服务器实例配置文件
# ----------------------------------------------------------------------
# Generated by the MySQL Server Instance Configuration Wizard #由MySQL服务器实例配置向导生成
# Installation Instructions 安装说明
# ----------------------------------------------------------------------
# On Linux you can copy this file to /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options
# (@localstatedir@ for this installation) or to
# ~/.my.cnf to set user-specific options.
#在Linux上，您可以将该文件复制到/etc/my.cnf来设置全局选项，mysql-data-dir/my.cnf来设置特定于服务器的选项(此安装的@localstatedir@)，或者~/.my.cnf来设置特定于用户的选项。
# On Windows you should keep this file in the installation directory
# of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To
# make sure the server reads the config file use the startup option
# "--defaults-file".
##在Windows上你应该保持这个文件在服务器的安装目录(例如C:\Program Files\MySQL\MySQL服务器X.Y)。要确保服务器读取配置文件，请使用启动选项“——default -file”。
# To run the server from the command line, execute this in a
# command line shell, e.g.
# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
##要从命令行运行服务器，请在命令行shell中执行，例如mysqld——default -file="C:\Program Files\MySQL\MySQL server X.Y\my.ini"
# To install the server as a Windows service manually, execute this in a
# command line shell, e.g.
# mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#要手动将服务器安装为Windows服务，请在命令行shell中执行此操作，例如mysqld——install MySQLXY——default -file="C:\Program Files\MySQL\MySQL server X.Y\my.ini"
# And then execute this in a command line shell to start the server, e.g.
# net start MySQLXY
#然后在命令行shell中执行这个命令来启动服务器，例如net start MySQLXY
#
# Guidelines for editing this file编辑此文件的指南
# ----------------------------------------------------------------------
#
# In this file, you can use all long options that the program supports.
# If you want to know the options a program supports, start the program
# with the "--help" option.
#在这个文件中，您可以使用程序支持的所有长选项。如果您想知道程序支持的选项，请使用“——help”选项启动程序。
# More detailed information about the individual options can also be
# found in the manual.
# For advice on how to change settings please see
# https://dev.mysql.com/doc/refman/8.0/en/server-configuration-defaults.html
#有关各个选项的更详细信息也可以在手册中找到。有关如何更改设置的建议，请参见https://dev.mysql.com/doc/refman/8.0/en/server-configuration-defaults.html
#
# CLIENT SECTION 客户端部分
# ----------------------------------------------------------------------
#
# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
MySQL客户机应用程序将读取以下选项。注意，只有MySQL提供的客户端应用程序才能阅读本节。如果您希望自己的MySQL客户机程序遵守这些值，您需要在初始化MySQL客户机库时将其指定为一个选项。
#
[client]
# pipe=
# socket=MYSQL
port=3306
[mysql]
no-beep
# default-character-set=
# SERVER SECTION 服务器部分
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
# file.
#MySQL服务器将读取以下选项。确保您已经正确安装了服务器(参见上面)，以便它读取这个文件。
# server_type=3
[mysqld]
# The next three options are mutually exclusive to SERVER_PORT below.
#下面的三个选项对SERVER_PORT是互斥的。skip-networking enable-named-pipe 共享内存
# skip-networking
# enable-named-pipe
# shared-memory
# shared-memory-base-name=MYSQL
# The Pipe the MySQL Server will use
# socket=MYSQL
# The TCP/IP Port the MySQL Server will listen on
port=3306
# Path to installation directory. All paths are usually resolved relative to this.
# basedir="C:/Program Files/MySQL/MySQL Server 8.0/"
# Path to the database root
datadir=C:/ProgramData/MySQL/MySQL Server 8.0/Data
# The default character set that will be used when a new schema or table is
# created and no character set is defined 创建新模式或表时使用的默认字符集，并且没有定义字符集
# character-set-server=
# The default authentication plugin to be used when connecting to the server 连接到服务器时使用的默认身份验证插件
default_authentication_plugin=caching_sha2_password
# The default storage engine that will be used when create new tables when 当创建新表时将使用的默认存储引擎
default-storage-engine=INNODB
# Set the SQL mode to strict 将SQL模式设置为strict
sql-mode="STRICT_TRANS_TABLES,NO_ENGINE_SUBSTITUTION"
# General and Slow logging. 一般和缓慢的日志。
log-output=NONE
general-log=0
general_log_file="DESKTOP-NF9QETB.log"
slow-query-log=0
slow_query_log_file="DESKTOP-NF9QETB-slow.log"
long_query_time=10
# Binary Logging. 二进制日志。
# log-bin
# Error Logging. 错误日志记录。
log-error="DESKTOP-NF9QETB.err"
# Server Id.
server-id=1
# Indicates how table and database names are stored on disk and used in MySQL. 指示表名和数据库名如何存储在磁盘上并在MySQL中使用。
# Value = 0: Table and database names are stored on disk using the lettercase specified in the
# CREATE TABLE or CREATE DATABASE statement. Name comparisons are case sensitive.
# You should not set this variable to 0 if you are running MySQL on a system that has
# case-insensitive file names (such as Windows or macOS). #Value = 0:表名和数据库名使用CREATE Table或CREATE database语句中指定的lettercase存储在磁盘上。名称比较区分大小写。如果您在一个具有不区分大小写文件名(如Windows或macOS)的系统上运行MySQL，则不应将该变量设置为0。
# Value = 1: Table names are stored in lowercase on disk and name comparisons are not
# case-sensitive. MySQL converts all table names to lowercase on storage and lookup.
# This behavior also applies to database names and table aliases. #表名以小写存储在磁盘上，并且名称比较不区分大小写。MySQL在存储和查找时将所有表名转换为小写。此行为也适用于数据库名称和表别名。
# Value = 3, Table and database names are stored on disk using the lettercase specified in the
# CREATE TABLE or CREATE DATABASE statement, but MySQL converts them to lowercase on
# lookup. Name comparisons are not case sensitive. This works only on file systems
# that are not case-sensitive! InnoDB table names and view names are stored in
# lowercase, as for Value = 1.#表名和数据库名使用CREATE Table或CREATE database语句中指定的lettercase存储在磁盘上，但是MySQL在查找时将它们转换为小写。名称比较不区分大小写。这只适用于不区分大小写的文件系统!InnoDB表名和视图名以小写存储，Value = 1。
# NOTE: lower_case_table_names can only be configured when initializing the server.
# Changing the lower_case_table_names setting after the server is initialized is prohibited.
lower_case_table_names=1
# Secure File Priv.# 权限安全文件
secure-file-priv="C:/ProgramData/MySQL/MySQL Server 8.0/Uploads"
# The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached. #MySQL服务器允许的最大并发会话量。这些连接中的一个将保留给具有超级特权的用户，以便允许管理员登录，即使已经达到连接限制。
max_connections=151
# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in 为所有线程打开的表的数量。增加这个值会增加mysqld需要的文件描述符的数量。因此，您必须确保在[mysqld_safe]节中的变量“open-files-limit”中将允许打开的文件数量至少设置为4096
# section [mysqld_safe]
table_open_cache=2000
# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them. #内部(内存)临时表的最大大小。如果一个表比这个值大，那么它将自动转换为基于磁盘的表。可以有很多。
tmp_table_size=94M
# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before. This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.) #我们应该在缓存中保留多少线程以供重用。当客户机断开连接时，如果之前的线程数不超过thread_cache_size，则将客户机的线程放入缓存。如果您有很多新连接，这将大大减少所需的线程创建量(通常，如果您有一个良好的线程实现，这不会带来显著的性能改进)。
thread_cache_size=10
#*** MyISAM Specific options
# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower). #MySQL允许在重新创建索引时(在修复、修改表或加载数据时)使用临时文件的最大大小。如果文件大小大于这个值，那么索引将通过键缓存创建(这比较慢)。
myisam_max_sort_file_size=100G
# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method. This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=179M
# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables. # 如果用于快速创建索引的临时文件比这里指定的使用键缓存的文件大，则首选键缓存方法。这主要用于强制大型表中的长字符键使用较慢的键缓存方法来创建索引。
key_buffer_size=8M
# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed. 用于对MyISAM表执行全表扫描的缓冲区的大小。如果需要完整的扫描，则为每个线程分配。
read_buffer_size=256K
read_rnd_buffer_size=512K
#*** INNODB Specific options *** INNODB特定选项
# innodb_data_home_dir=
# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things. 如果您启用了一个支持InnoDB的MySQL服务器，但是您不打算使用它，那么可以使用这个选项。这将节省内存和磁盘空间，并加快一些事情。skip-innodb
# skip-innodb
# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second. 如果设置为1,InnoDB将在每次提交时将事务日志刷新(fsync)到磁盘，这将提供完整的ACID行为。如果您愿意牺牲这种安全性，并且正在运行小型事务，您可以将其设置为0或2，以将磁盘I/O减少到日志。值0表示日志仅写入日志文件，日志文件大约每秒刷新一次磁盘。值2表示日志在每次提交时写入日志文件，但是日志文件大约每秒只刷新一次磁盘。
innodb_flush_log_at_trx_commit=1
# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).InnoDB用于缓冲日志数据的缓冲区大小。一旦它满了，InnoDB就必须将它刷新到磁盘。由于它无论如何每秒刷新一次，所以将它设置为非常大的值是没有意义的(即使是长事务)。
innodb_log_buffer_size=5M
# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system. Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high. #与MyISAM不同，InnoDB使用缓冲池来缓存索引和行数据。设置的值越大，访问表中的数据所需的磁盘I/O就越少。在专用数据库服务器上，可以将该参数设置为机器物理内存大小的80%。但是，不要将它设置得太大，因为物理内存的竞争可能会导致操作系统中的分页。注意，在32位系统上，每个进程的用户级内存可能被限制在2-3.5G，所以不要设置得太高。
innodb_buffer_pool_size=20M
# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process. 日志组中每个日志文件的大小。您应该将日志文件的合并大小设置为缓冲池大小的25%-100%，以避免在覆盖日志文件时出现不必要的缓冲池刷新活动。但是，请注意，较大的日志文件大小将增加恢复过程所需的时间。
innodb_log_file_size=48M
# Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing. #InnoDB内核中允许的线程数。最优值在很大程度上取决于应用程序、硬件以及OS调度程序属性。过高的值可能导致线程抖动。
innodb_thread_concurrency=9
# The increment size (in MB) for extending the size of an auto-extend InnoDB system tablespace file when it becomes full. #增量大小(以MB为单位)，用于在表空间满时扩展自动扩展的InnoDB系统表空间文件的大小。
innodb_autoextend_increment=128
# The number of regions that the InnoDB buffer pool is divided into.
# For systems with buffer pools in the multi-gigabyte range, dividing the buffer pool into separate instances can improve concurrency,
# by reducing contention as different threads read and write to cached pages. #InnoDB缓冲池划分的区域数。对于具有多gb缓冲池的系统，将缓冲池划分为单独的实例可以提高并发性，因为不同的线程对缓存页面的读写会减少争用。
innodb_buffer_pool_instances=8
# Determines the number of threads that can enter InnoDB concurrently. #确定可以同时进入InnoDB的线程数
innodb_concurrency_tickets=5000
# Specifies how long in milliseconds (ms) a block inserted into the old sublist must stay there after its first access before
# it can be moved to the new sublist. #指定插入到旧子列表中的块必须在第一次访问之后停留多长时间(毫秒)，然后才能移动到新子列表。
innodb_old_blocks_time=1000
# It specifies the maximum number of .ibd files that MySQL can keep open at one time. The minimum value is 10. #它指定MySQL一次可以打开的.ibd文件的最大数量。最小值是10。
innodb_open_files=300
# When this variable is enabled, InnoDB updates statistics during metadata statements. #当启用此变量时，InnoDB会在元数据语句期间更新统计信息。
innodb_stats_on_metadata=0
# When innodb_file_per_table is enabled (the default in 5.6.6 and higher), InnoDB stores the data and indexes for each newly created table
# in a separate .ibd file, rather than in the system tablespace. #当启用innodb_file_per_table(5.6.6或更高版本的默认值)时，InnoDB将每个新创建的表的数据和索引存储在单独的.ibd文件中，而不是系统表空间中。
innodb_file_per_table=1
# Use the following list of values: 0 for crc32, 1 for strict_crc32, 2 for innodb, 3 for strict_innodb, 4 for none, 5 for strict_none. #使用以下值列表:0表示crc32, 1表示strict_crc32, 2表示innodb, 3表示strict_innodb, 4表示none, 5表示strict_none。
innodb_checksum_algorithm=0
# The number of outstanding connection requests MySQL can have.
# This option is useful when the main MySQL thread gets many connection requests in a very short time.
# It then takes some time (although very little) for the main thread to check the connection and start a new thread.
# The back_log value indicates how many requests can be stacked during this short time before MySQL momentarily
# stops answering new requests.
# You need to increase this only if you expect a large number of connections in a short period of time. ## MySQL可以有多少未完成连接请求。当MySQL主线程在很短的时间内收到许多连接请求时，这个选项非常有用。然后，主线程需要一些时间(尽管很少)来检查连接并启动一个新线程。back_log值表示在MySQL暂时停止响应新请求之前的短时间内可以堆多少个请求。只有当您预期在短时间内会有大量连接时，才需要增加这个值。
back_log=80
# If this is set to a nonzero value, all tables are closed every flush_time seconds to free up resources and
# synchronize unflushed data to disk.
# This option is best used only on systems with minimal resources. #如果将该值设置为非零值，则每隔flush_time秒关闭所有表，以释放资源并将未刷新的数据同步到磁盘。这个选项最好只在资源最少的系统上使用。
flush_time=0
# The minimum size of the buffer that is used for plain index scans, range index scans, and joins that do not use #用于普通索引扫描、范围索引扫描和不使用索引执行全表扫描的连接的缓冲区的最小大小。
# indexes and thus perform full table scans.
join_buffer_size=200M
# The maximum size of one packet or any generated or intermediate string, or any parameter sent by the
# mysql_stmt_send_long_data() C API function. #由mysql_stmt_send_long_data() C API函数发送的一个包或任何生成的或中间字符串或任何参数的最大大小
max_allowed_packet=500M
# If more than this many successive connection requests from a host are interrupted without a successful connection,
# the server blocks that host from performing further connections. #如果在没有成功连接的情况下中断了来自主机的多个连续连接请求，则服务器将阻止主机执行进一步的连接。
max_connect_errors=100
# Changes the number of file descriptors available to mysqld.
# You should try increasing the value of this option if mysqld gives you the error "Too many open files". #更改mysqld可用的文件描述符的数量。如果mysqld给您的错误是“打开的文件太多”，您应该尝试增加这个选项的值。
open_files_limit=4161
# If you see many sort_merge_passes per second in SHOW GLOBAL STATUS output, you can consider increasing the
# sort_buffer_size value to speed up ORDER BY or GROUP BY operations that cannot be improved with query optimization
# or improved indexing. #如果在SHOW GLOBAL STATUS输出中每秒看到许多sort_merge_passes，可以考虑增加sort_buffer_size值，以加快ORDER BY或GROUP BY操作的速度，这些操作无法通过查询优化或改进索引来改进。
sort_buffer_size=1M
# The number of table definitions (from .frm files) that can be stored in the definition cache.
# If you use a large number of tables, you can create a large table definition cache to speed up opening of tables.
# The table definition cache takes less space and does not use file descriptors, unlike the normal table cache.
# The minimum and default values are both 400. #可以存储在定义缓存中的表定义的数量(来自.frm文件)。如果使用大量表，可以创建一个大型表定义缓存来加速表的打开。与普通的表缓存不同，表定义缓存占用更少的空间，并且不使用文件描述符。最小值和默认值都是400。
table_definition_cache=1400
# Specify the maximum size of a row-based binary log event, in bytes.
# Rows are grouped into events smaller than this size if possible. The value should be a multiple of 256. #指定基于行的二进制日志事件的最大大小，单位为字节。如果可能，将行分组为小于此大小的事件。这个值应该是256的倍数。
binlog_row_event_max_size=8K
# If the value of this variable is greater than 0, a replication slave synchronizes its master.info file to disk.
# (using fdatasync()) after every sync_master_info events. #如果该变量的值大于0，则复制奴隶将其主.info文件同步到磁盘。(在每个sync_master_info事件之后使用fdatasync())。
sync_master_info=10000
# If the value of this variable is greater than 0, the MySQL server synchronizes its relay log to disk.
# (using fdatasync()) after every sync_relay_log writes to the relay log. #如果这个变量的值大于0,MySQL服务器将其中继日志同步到磁盘。(在每个sync_relay_log写入到中继日志之后使用fdatasync())。
sync_relay_log=10000
# If the value of this variable is greater than 0, a replication slave synchronizes its relay-log.info file to disk.
# (using fdatasync()) after every sync_relay_log_info transactions. #如果该变量的值大于0，则复制奴隶将其中继日志.info文件同步到磁盘。(在每个sync_relay_log_info事务之后使用fdatasync())。
sync_relay_log_info=10000
# Load mysql plugins at start."plugin_x ; plugin_y". #开始时加载mysql插件。“plugin_x;plugin_y”
# plugin_load
# The TCP/IP Port the MySQL Server X Protocol will listen on. #MySQL服务器X协议将监听TCP/IP端口。
loose_mysqlx_port=33060
948
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
