- 博客(2)
- 资源 (7)
- 收藏
- 关注
RSS订阅原创 CRC3代码整理
CRC3代码在做SPI通信时用到了CRC3校验看了很多代码终于整理出一版。u1 crc3_high_first2(u4 spi_frame){u1 i;u4 crc=spi_frame; /* 计算的初始crc值 /u4 chk = 0x08;u4 poly = 0x0B; / 多项式1011 */chk <<= 20;poly<<= 20;fo...
2018-12-03 16:12:23
4233
原创 不能正确安装PEMicro/Freescale – CDC serial Port 驱动的解决办法
不能正确安装PEMicro/Freescale – CDC serial Port 驱动的解决办法本文主要内容参考重复的内容不再多嘴： http://bbs.21ic.com/icview-1213638-1-1.html参考完上文后，如果看过上文问题已经解决，就不需要往下看了。 如果像楼主一样还是没有解决问题，楼主搞了2天也是要疯了，最后发现设备管理器中提到的驱动文件和实际我们下载的...
2018-07-31 18:54:48
6584
3
Unalbe to load DLL 不能加载dll解决思路
Unalbe to load DLL:由于应用程序配置不正确，应用程序未能启动。重新安装应用程序可能会纠正这个问题。（Exception from HRESULT:0x800736B1）.
解决思路。
2016-07-06
SAE J2716_201604 (SENT英文).pdf
1. SCOPE
This document defines a level of standardization in the implementation of the digital pulse scheme for reporting sensor information via Single Edge Nibble Transmission (SENT) encoding. This standard will allow ECU and tool manufacturers to satisfy the needs of multiple end users with minimum modifications to the basic design. This standard will benefit vehicle Original Equipment Manufacturers (OEMs) by achieving lower ECU costs due to higher industry volumes of the basic design.
Requirements stated in this document provide a minimum standard level of performance to which all compatible ECUs and media shall be designed. This assures data communication among all connected devices regardless of supplier.
This document is a communication interface specification and no to be treated as product specification.
The intended audience includes, but is not limited to, ECU suppliers, sensor suppliers, component release engineers and vehicle system engineers.
2020-06-12
空空如也
TA创建的收藏夹 TA关注的收藏夹
TA关注的人