Oracle性能监控脚本

 

Oracle性能监控脚本

1. 监控事例的等待

select event,sum(decode(wait_Time,0,0,1)) "Prev",
sum(decode(wait_Time,0,1,0)) "Curr",count(*) "Tot"
from v$session_Wait
group by event order by 4;

2. 回滚段的争用情况

select name, waits, gets, waits/gets "Ratio"
from v$rollstat a, v$rollname b
where a.usn = b.usn;

3. 监控表空间的 I/O 比例

select df.tablespace_name name,df.file_name "file",f.phyrds pyr,
f.phyblkrd pbr,f.phywrts pyw, f.phyblkwrt pbw
from v$filestat f, dba_data_files df
where f.file# = df.file_id
order by df.tablespace_name;

4. 监控文件系统的 I/O 比例

select substr(a.file#,1,2) "#", substr(a.name,1,30) "Name",
a.status, a.bytes, b.phyrds, b.phywrts
from v$datafile a, v$filestat b
where a.file# = b.file#;

5.在某个用户下找所有的索引

select user_indexes.table_name, user_indexes.index_name,uniqueness, column_name
from user_ind_columns, user_indexes
where user_ind_columns.index_name = user_indexes.index_name
and user_ind_columns.table_name = user_indexes.table_name
order by user_indexes.table_type, user_indexes.table_name,
user_indexes.index_name, column_position;

6. 监控 SGA 的命中率

select a.value + b.value "logical_reads", c.value "phys_reads",
round(100 * ((a.value+b.value)-c.value) / (a.value+b.value)) "BUFFER HIT RATIO"
from v$sysstat a, v$sysstat b, v$sysstat c
where a.statistic# = 38 and b.statistic# = 39
and c.statistic# = 40;

7. 监控 SGA 中字典缓冲区的命中率

select parameter, gets,Getmisses , getmisses/(gets+getmisses)*100 "miss ratio",
(1-(sum(getmisses)/ (sum(gets)+sum(getmisses))))*100 "Hit ratio"
from v$rowcache
where gets+getmisses <>0
group by parameter, gets, getmisses;

8. 监控 SGA 中共享缓存区的命中率，应该小于1%

select sum(pins) "Total Pins", sum(reloads) "Total Reloads",
sum(reloads)/sum(pins) *100 libcache
from v$librarycache;

select sum(pinhits-reloads)/sum(pins) "hit radio",sum(reloads)/sum(pins) "reload percent"
from v$librarycache;

9. 显示所有数据库对象的类别和大小

select count(name) num_instances ,type ,sum(source_size) source_size ,
sum(parsed_size) parsed_size ,sum(code_size) code_size ,sum(error_size) error_size,
sum(source_size) +sum(parsed_size) +sum(code_size) +sum(error_size) size_required
from dba_object_size
group by type order by 2;

10. 监控 SGA 中重做日志缓存区的命中率，应该小于1%

SELECT name, gets, misses, immediate_gets, immediate_misses,
Decode(gets,0,0,misses/gets*100) ratio1,
Decode(immediate_gets+immediate_misses,0,0,
immediate_misses/(immediate_gets+immediate_misses)*100) ratio2
FROM v$latch WHERE name IN ('redo allocation', 'redo copy');

11. 监控内存和硬盘的排序比率，最好使它小于 .10，增加 sort_area_size

SELECT name, value FROM v$sysstat WHERE name IN ('sorts (memory)', 'sorts (disk)');

12. 监控当前数据库谁在运行什么SQL语句

SELECT osuser, username, sql_text from v$session a, v$sqltext b
where a.sql_address =b.address order by address, piece;

13. 监控字典缓冲区

SELECT (SUM(PINS - RELOADS)) / SUM(PINS) "LIB CACHE" FROM V$LIBRARYCACHE;
SELECT (SUM(GETS - GETMISSES - USAGE - FIXED)) / SUM(GETS) "ROW CACHE" FROM V$ROWCACHE;
SELECT SUM(PINS) "EXECUTIONS", SUM(RELOADS) "CACHE MISSES WHILE EXECUTING" FROM V$LIBRARYCACHE;

后者除以前者,此比率小于1%,接近0%为好。

SELECT SUM(GETS) "DICTIONARY GETS",SUM(GETMISSES) "DICTIONARY CACHE GET MISSES"
FROM V$ROWCACHE

14. 找ORACLE字符集

select * from sys.props$ where name='NLS_CHARACTERSET';

15. 监控 MTS

select busy/(busy+idle) "shared servers busy" from v$dispatcher;

此值大于0.5时，参数需加大

select sum(wait)/sum(totalq) "dispatcher waits" from v$queue where type='dispatcher';
select count(*) from v$dispatcher;
select servers_highwater from v$mts;

servers_highwater接近mts_max_servers时，参数需加大

16. 碎片程度

select tablespace_name,count(tablespace_name) from dba_free_space group by tablespace_name
having count(tablespace_name)>10;

alter tablespace name coalesce;
alter table name deallocate unused;

create or replace view ts_blocks_v as
select tablespace_name,block_id,bytes,blocks,'free space' segment_name from dba_free_space
union all
select tablespace_name,block_id,bytes,blocks,segment_name from dba_extents;

select * from ts_blocks_v;

select tablespace_name,sum(bytes),max(bytes),count(block_id) from dba_free_space
group by tablespace_name;

查看碎片程度高的表

SELECT segment_name table_name , COUNT(*) extents
FROM dba_segments WHERE owner NOT IN ('SYS', 'SYSTEM') GROUP BY segment_name
HAVING COUNT(*) = (SELECT MAX( COUNT(*) ) FROM dba_segments GROUP BY segment_name);

17. 表、索引的存储情况检查

select segment_name,sum(bytes) space,count(*) ext_quan from dba_extents where
tablespace_name='&tablespace_name' and segment_type='TABLE' group by tablespace_name,segment_name;

select segment_name,count(*) from dba_extents where segment_type='INDEX' and owner='&owner'
group by segment_name;
18、表空间使用情况

       Ａ：oracle 10g之前的版本

SELECT UPPER(F.TABLESPACE_NAME) "表空间名", D.TOT_GROOTTE_MB "表空间大小(M)", D.TOT_GROOTTE_MB - F.TOTAL_BYTES "已使用空间(M)", TO_CHAR(ROUND((D.TOT_GROOTTE_MB - F.TOTAL_BYTES) / D.TOT_GROOTTE_MB * 100, 2), '990.99') "使用比", F.TOTAL_BYTES "空闲空间(M)", F.MAX_BYTES "最大块(M)" FROM (SELECT TABLESPACE_NAME, ROUND(SUM(BYTES) / (1024 * 1024), 2) TOTAL_BYTES, ROUND(MAX(BYTES) / (1024 * 1024), 2) MAX_BYTES FROM SYS.DBA_FREE_SPACE GROUP BY TABLESPACE_NAME) F, (SELECT DD.TABLESPACE_NAME, ROUND(SUM(DD.BYTES) / (1024 * 1024), 2) TOT_GROOTTE_MB FROM SYS.DBA_DATA_FILES DD GROUP BY DD.TABLESPACE_NAME) D WHERE D.TABLESPACE_NAME = F.TABLESPACE_NAME ORDER BY F.TABLESPACE_NAME;

 

　　Ｂ：10g提供了很好的查询表空间使用率的方法，不需要再去生成复杂的SQL，在DBA权限下使用：

SQL> Select * from sys.DBA_TABLESPACE_USAGE_METRICS;

TABLESPACE_NAME                USED_SPACE TABLESPACE_SIZE USED_PERCENT
------------------------------ ---------- --------------- ------------
TS_ORABPEL                        3137056        47640820   6.58480689
TS_ORABPEL_LOB                    1663552         8982524   18.5198726
TS_ORABPEL_MOVE                   3176104        31074302   10.2209987
TS_PRODUCT                         167952        12582906   1.33476321
UNDOTBS1                             6736         2621440   .256958008
USERS                                1688         4452094   .037914743

.......

即可

 

表空间是否达到阈值，可以查询

SQL> SELECT * FROM dba_outstanding_alerts;

看到数据库的严重告警