U-Boot 2010.03 ( 4月 18 2010 - 21:39:25) modified by tekkamanninja (tekkamanninja@163.com) Love Linux I2C: ready DRAM: 64 MB Flash: 2 MB NAND: 128 MiB Video: 240x320x16 20kHz 62Hz In: serial Out: serial Err: serial USB slave is Net: dm9000 U-Boot 2010.03 ( 4月 18 2010 - 21:39:25) modified by tekkamanninja (tekkamanninja@163.com) Love Linux Hit any key to stop autoboot: 0 [u-boot@MINI2440]# tftp zImage.img dm9000 i/o: 0x20000300, id: 0x90000a46 DM9000: running in 16 bit mode MAC: 08:08:11:18:12:27 operating at 100M full duplex mode Using dm9000 device TFTP from server 192.168.1.100; our IP address is 192.168.1.101 Filename 'zImage.img'. Load address: 0x30008000 Loading: T ################################################################# ################################################################# ################ done Bytes transferred = 2141940 (20aef4 hex) [u-boot@MINI2440]# nand erase 0x80000 0x500000;nand write 0x30008000 0x80000 0x300000 NAND erase: device 0 offset 0x80000, size 0x500000 Erasing at 0x56000002800000 -- 0% complete. OK NAND write: device 0 offset 0x80000, size 0x300000 Writing at 0x36000000020000 -- 100% is complete. 3145728 bytes written: OK [u-boot@MINI2440]# boot NAND read: device 0 offset 0x80000, size 0x500000 5242880 bytes read: OK ## Booting kernel from Legacy Image at 30008000 ... Image Name: tekkaman Created: 2010-04-28 16:30:31 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2141876 Bytes = 2 MB Load Address: 30008000 Entry Point: 30008040 Verifying Checksum ... OK XIP Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.33.3 (tekkaman@MAGI-Linux) (gcc version 4.3.2 (crosstool-NG-1.6.1-tekkaman) ) #1 Thu Apr 29 00:28:12 CST 2010 CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 CPU: VIVT data cache, VIVT instruction cache Machine: MINI2440 Memory policy: ECC disabled, Data cache writeback CPU S3C2440A (id 0x32440001) S3C24XX Clocks, Copyright 2004 Simtec Electronics S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: noinitrd root=/dev/mtdblock3 rootfstype=yaffs2 rw console=ttySAC0,115200 init=/linuxrc mem=64M PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 60432KB available (3768K code, 412K data, 140K init, 0K highmem) SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:85 irq: clearing pending status 02000000 irq: clearing subpending status 00000003 irq: clearing subpending status 00000002 Console: colour dummy device 80x30 console [ttySAC0] enabled Calibrating delay loop... 201.93 BogoMIPS (lpj=504832) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 MINI2440: Option string mini2440=0t MINI2440: 't' ignored, touchscreen not compiled in MINI2440: LCD [0:240x320] 1:800x480 2:1024x768 S3C2440: Initialising architecture S3C2440: IRQ Support S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics DMA channel 0 at c4808000, irq 33 DMA channel 1 at c4808040, irq 34 DMA channel 2 at c4808080, irq 35 DMA channel 3 at c48080c0, irq 36 S3C244X: Clock Support, DVS off bio: create slab <bio-0> at 0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb s3c-i2c s3c2440-i2c: slave address 0x10 s3c-i2c s3c2440-i2c: bus frequency set to 98 KHz s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter Advanced Linux Sound Architecture Driver Version 1.0.21. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. ROMFS MTD (C) 2007 Red Hat, Inc. yaffs Apr 29 2010 00:16:46 Installing. msgmni has been set to 118 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Console: switching to colour frame buffer device 60x53 fb0: s3c2410fb frame buffer device s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440 s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440 s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440 brd: module loaded at24 0-0050: 1024 byte 24c08 EEPROM (writable) S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns s3c24xx-nand s3c2440-nand: NAND soft ECC NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) Creating 4 MTD partitions on "NAND 128MiB 3,3V 8-bit": 0x000000000000-0x000000060000 : "u-boot" ftl_cs: FTL header not found. 0x000000060000-0x000000080000 : "u-boot-env" ftl_cs: FTL header not found. 0x000000080000-0x000000580000 : "kernel" ftl_cs: FTL header not found. 0x000000580000-0x000008000000 : "root" ftl_cs: FTL header not found. dm9000 Ethernet Driver, V1.31 eth0: dm9000e at c486e300,c4872304 IRQ 51 MAC: 08:08:11:18:12:27 (chip) ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver s3c2410-ohci s3c2410-ohci: S3C24XX OHCI s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new interface driver libusual s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes mice: PS/2 mouse device common for all mice input: gpio-keys as /devices/platform/gpio-keys/input/input0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 i2c /dev entries driver S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled cpuidle: using governor ladder sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman s3c-sdi s3c2440-sdi: powered down. s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ Registered led device: led1 Registered led device: led2 Registered led device: led3 Registered led device: led4 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver No device for DAI UDA134X No device for DAI s3c24xx-i2s S3C24XX_UDA134X SoC Audio driver UDA134X SoC Audio Codec asoc: UDA134X <-> s3c24xx-i2s mapping ok ALSA device list: #0: S3C24XX_UDA134X (UDA134X) TCP cubic registered NET: Registered protocol family 17 s3c2410-rtc s3c2410-rtc: setting system clock to 2010-04-29 00:25:10 UTC (1272500710) yaffs: dev is 32505859 name is "mtdblock3" yaffs: passed flags "" yaffs: Attempting MTD mount on 31.3, "mtdblock3" yaffs: restored from checkpoint yaffs_read_super: isCheckpointed 1 VFS: Mounted root (yaffs2 filesystem) on device 31:3. Freeing init memory: 140K ----------mount all ----------Starting mdev...... ******************************************** Tekkaman Ninja mini2440 Rootfs(nfs) 2010.3 Love Linux ! ! @@ Love Ke Ke ! ! ******************************************** (none) login: |