standard method to install openstack by packstack

Step 0: Prerequisites
Software

Red Hat Enterprise Linux (RHEL) 7 is the minimum recommended version, or the equivalent version of one of the RHEL-based Linux distributions such as CentOS, Scientific Linux, and so on. x86_64 is currently the only supported architecture.

See RDO repositories for details on required repositories.

Name the host with a fully qualified domain name rather than a short-form name to avoid DNS issues with Packstack.
Hardware

Machine with at least 16GB RAM, processors with hardware virtualization extensions, and at least one network adapter.
Network

If you plan on having external network access to the server and instances, this is a good moment to properly configure your network settings. A static IP address to your network card, and disabling NetworkManager are good ideas.

$ sudo systemctl disable firewalld
$ sudo systemctl stop firewalld
$ sudo systemctl disable NetworkManager
$ sudo systemctl stop NetworkManager
$ sudo systemctl enable network
$ sudo systemctl start network

If you are planning on something fancier, read the document on advanced networking before proceeding.
Step 1: Software repositories

On RHEL, download and install the RDO repository RPM to set up the OpenStack repository:

$ sudo yum install -y https://rdoproject.org/repos/rdo-release.rpm

On CentOS, the Extras repository provides the RPM that enables the OpenStack repository. Extras is enabled by default on CentOS 7, so you can simply install the RPM to set up the OpenStack repository.

$ sudo yum install -y centos-release-openstack-stein

Make sure the repository is enabled:

sudo yum-config-manager --enable openstack-stein

Update your current packages:

$ sudo yum update -y

Looking for an older version? See http://rdoproject.org/repos/ for the full listing.
Step 2: Install Packstack Installer

$ sudo yum install -y openstack-packstack

Step 3: Run Packstack to install OpenStack

Packstack takes the work out of manually setting up OpenStack. For a single node OpenStack deployment, run the following command:

$ sudo packstack --allinone

If you encounter failures, see the Workarounds page for tips.

If you have run Packstack previously, there will be a file in your home directory named something like packstack-answers-20130722-153728.txt You will probably want to use that file again, using the --answer-file option, so that any passwords you have already set (for example, mysql) will be reused.

The installer will ask you to enter the root password for each host node you are installing on the network, to enable remote configuration of the host so it can remotely configure each node using Puppet.

Once the process is complete, you can log in to the OpenStack web interface Horizon by going to http://$YOURIP/dashboard. The user name is admin. The password can be found in the file keystonerc_admin in the /root directory of the control node.