思科C3750端口汇聚聚合

1.进入端口配置#interface range GigabitEthernet1/1/1-4

创建虚拟通道并配置trunk

#channel-group 2 mode auto   模式为auto

#switchport trunk encapsulation dot1q

#switchport mode trunk


生成如下配置:

interface GigabitEthernet1/1/1

 switchport trunk encapsulation dot1q
 switchport mode trunk
 channel-group 2 mode auto
!
interface GigabitEthernet1/1/2
 switchport trunk encapsulation dot1q
 switchport mode trunk
 channel-group 2 mode auto
!
interface GigabitEthernet1/1/3
 switchport trunk encapsulation dot1q
 switchport mode trunk
 channel-group 2 mode auto
!
interface GigabitEthernet1/1/4
 switchport trunk encapsulation dot1q
 switchport mode trunk
 channel-group 2 mode auto

!

同时在全局模式下,自动生成

!
interface Port-channel2
 switchport trunk encapsulation dot1q
 switchport mode trunk

!

2.同样方法在另一台交换机相应的端口上做如上同样的配置


3.在交换机上查看聚合信息

NST3750#sh etherchannel summary 
Flags:  D - down        P - bundled in port-channel
        I - stand-alone s - suspended
        H - Hot-standby (LACP only)
        R - Layer3      S - Layer2
        U - in use      f - failed to allocate aggregator

        M - not in use, minimum links not met
        u - unsuitable for bundling
        w - waiting to be aggregated
        d - default port

Number of channel-groups in use: 1

Number of aggregators:           1

Group  Port-channel  Protocol    Ports
------+-------------+-----------+-----------------------------------------------
2      Po2(SU)         PAgP      Gi1/1/1(P)  Gi1/1/2(P)  Gi1/1/3(D)  
                                 Gi1/1/4(D)  


NST3750#sh etherchannel port-channel 


Channel-group listing: 

----------------------
Group: 2 
----------
Port-channels in the group: 
---------------------------
Port-channel: Po2
------------

Age of the Port-channel   = 8d:19h:28m:54s
Logical slot/port   = 10/2          Number of ports = 2
GC                  = 0x00020001      HotStandBy port = null
Port state          = Port-channel Ag-Inuse 
Protocol            =   PAgP
Port security       = Disabled


Ports in the Port-channel: 


Index   Load   Port     EC state        No of bits
------+------+------+------------------+-----------
  0     00     Gi1/1/1  Automatic-Sl       0
  0     00     Gi1/1/2  Automatic-Sl       0


Time since last port bundled:    0d:00h:05m:01s    Gi1/1/2
Time since last port Un-bundled: 0d:00h:05m:27s    Gi1/1/2


聚合模式选择:



  • 0
    点赞
  • 5
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
目录: 01 H3C S5500与思科3750对接二层链路聚合的典型组网配置案例 02 H3C S5500与思科2960对接二层链路聚合的典型组网配置案例 03 H3C S6800与思科3560对接二层链路聚合典型组网配置案例 04 H3C S6800与思科2960对接二层链路聚合典型组网配置案例 05 H3C S5820与思科2960对接二层链路聚合典型组网配置案例 06 S12508与思科3560对接NTP典型组网配置案例 07 S6520与思科3560对接NTP典型组网配置案例 08 S5820与思科3560对接NTP典型组网配置案例 09 S6800与思科3560对接NTP典型组网配置案例 10 S12508与思科2960对接NTP典型组网配置案例 11 S5500与思科3750对接EBGP典型组网配置案例 12 S6520与思科3925对接NTP典型组网配置案例 13 S5820与思科3925对接NTP典型组网配置案例 14 S6800与思科3925对接NTP典型组网配置案例 15 S6520与思科3750对接NTP典型组网配置案例 16 S6520与思科2960对接NTP典型组网配置案例 17 S5820与思科3750对接NTP典型组网配置案例 18 S5820与思科2960对接NTP典型组网配置案例 19 S6800与思科2960对接NTP典型组网配置案例 20 S6800与思科3750对接NTP典型组网配置案例 21 S5500与思科3750对接RIP典型组网配置案例 22 S5500与思科3750对接IBGP典型组网配置案例 23 H3C ME5000和思科语音系统融合典型配置 24 S6800与思科2960对接PVST典型组网配置案例 25 S6800与思科3560对接PVST典型组网配置案例 26 H3C设备与思科做BFD配置案例 27 S5820与思科2960对接PVST典型组网配置案例 28 S12508与思科3750对接PVST典型组网配置案例 29 S12508与思科2960对接PVST典型组网配置案例 30 S5500与思科3750对接多VPN实例OSPF典型组网配置案例 31 思科语音网关3662语音命令对应的MSR翻译 32 MSR系列路由器FR IPv6和思科互通典型配置 33 H3C VG1040使用SIPLINE方式与思科CallManager5.0.4互通典型配置 34 S5820-52QF-U与思科N5548 FC(NPV方式)互通配置 35 V7防火墙和思科ACS 实现radius认证 36 S9500E配置远程镜像导致网络中断问题解决方法 37 iMC设备定义功能介绍 38 MSR路由器与Cisco36 72系列路由器MPLS VPN跨标签对接案例 39 CE3000-EI与Cisco 4948 PIM-SSM对接配置案例 40 S12500&S9500E&CR16000 CoPP应用案例 41 配合EIA进行iNode批量升级的典型配置 42 H3C XE2000和AVAYA S85对接典型配置案例 43 CAMS设备无关功能特性配置
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值