各厂家网络设备查看端口收发光功率-命令汇总

年底了，博猪很懒，半年都没写几篇像样的技术文章，今天抽风，汇总一下不同厂家设备的端口收发光命令吧，工程上经常用到，也经常容易忘记，备忘。

本文记录的设备型号有：cisco CRS、7609、Nexus7K、华为NE5000E、9312、8512、H3C 12508、中兴8905、Juniper EX8208、上海贝尔（阿尔卡特）OS10K、SR7750。

型号：思科CRS-1    系统版本：IOS XR , Version 4.0.4

CRS-1#show controllers SONET 0/0/1/0

<…>

Optical Power Monitoring (accuracy: +/- 1dB)
  Rx power = 0.0828 mW, -10.8 dBm
  Tx power = 1.0288 mW, 0.1 dBm
  Tx laser current bias = 68.3 mA

!<---------POS口

 

CRS-1#show hw-module subslot 0/10/0 status pluggable-optics 0

SPA 0/10/0 device pluggable-optics 0/0 info:
int Tengige/10/0/0: 
        State: Enabled
        Environmental Information - raw values
                Temperature: 8602
                Tx voltage: 0 in units of 100uVolt
                Tx bias: 63000 uA
                Tx power: 0 dBm (10180 in units of 0.1 uW)
                Rx power: -9 dBm (1126 in units of 0.1 uW)
                (AUX1) +3.3V Supply Voltage: 32324
!<---------GE口

 

型号：思科7609

7609#show interfaces te1/1 transceiver

                                         Optical   Optical
            Temperature  Voltage  Current   Tx Power  Rx Power
Port        (Celsius)    (Volts)  (mA)      (dBm)     (dBm)
----------  -----------  -------  --------  --------  --------
Te1/1