linux3.10 内存管理（二）伙伴系统内存管理详解

最新推荐文章于 2024-02-06 10:28:31 发布

oqqYuJi12345678

最新推荐文章于 2024-02-06 10:28:31 发布

阅读量803

点赞数

分类专栏：内存管理文章标签： linux 伙伴系统内存管理 linux伙伴系统内存管理初始化

本文链接：https://blog.csdn.net/oqqYuJi12345678/article/details/97618343

版权

内存管理专栏收录该内容

9 篇文章 1 订阅

订阅专栏

一：伙伴系统的初始化函数

系统初始化的时候，会进行如下的调用关系来初始化伙伴管理系统：

start_kernel

---------->mm_init

----------->mem_init

在mem_init函数中，会把之前使用的bootmem 里面管理的空闲内存释放到伙伴系统中，初始化完伙伴系统以后，内存管理就由伙伴系统来接管。

void __init mem_init(void)
{
	unsigned long reserved_pages, free_pages;
	struct memblock_region *reg;
	int i;
#ifdef CONFIG_HAVE_TCM
	/* These pointers are filled in on TCM detection */
	extern u32 dtcm_end;
	extern u32 itcm_end;
#endif

	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;

	/* this will put all unused low memory onto the freelists */
	free_unused_memmap(&meminfo);   释放meminfo 中记录的bank的物理内存，这边只初始化了一
                                          个bank，所以其实什么都没做

	totalram_pages += free_all_bootmem();  把bootmem中的内存释放到伙伴系统中
	pr_err("totalram_pages=%lx \n",totalram_pages);

#ifdef CONFIG_SA1111
	/* now that our DMA memory is actually so designated, we can free it */
	free_reserved_area(__va(PHYS_PFN_OFFSET), swapper_pg_dir, 0, NULL);
#endif

	free_highpages();   没有定义high memory

	reserved_pages = free_pages = 0;

	for_each_bank(i, &meminfo) {      这边只是遍历所有的page，查询标志位，对空闲和reserve
的内存做统计
		struct membank *bank = &meminfo.bank[i];
		unsigned int pfn1, pfn2;
		struct page *page, *end;

		pfn1 = bank_pfn_start(bank);
		pfn2 = bank_pfn_end(bank);

		page = pfn_to_page(pfn1);
		end  = pfn_to_page(pfn2 - 1) + 1;

		do {
			if (PageReserved(page))
				reserved_pages++;
			else if (!page_count(page))
				free_pages++;
			page++;
		} while (page < end);
	}

	/*
	 * Since our memory may not be contiguous, calculate the
	 * real number of pages we have in this system
	 */
	printk(KERN_INFO "Memory:");
	num_physpages = 0;
	for_each_memblock(memory, reg) {
		unsigned long pages = memblock_region_memory_end_pfn(reg) -
			memblock_region_memory_base_pfn(reg);
		num_physpages += pages;
		printk(" %ldMB", pages >> (20 - PAGE_SHIFT));
	}
	printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));


}

释放内存，初始化伙伴系统的核心函数是 free_all_bootmem

unsigned long __init free_all_bootmem(void)
{
	unsigned long total_pages = 0;
	bootmem_data_t *bdata;
	struct pglist_data *pgdat;

	for_each_online_pgdat(pgdat)
		reset_node_lowmem_managed_pages(pgdat);把每个zone的managed_pages清零

	list_for_each_entry(bdata, &bdata_list, list)
		total_pages += free_all_bootmem_core(bdata); 释放bootmem到伙伴系统中

	return total_pages;
}

在理解linux的内存管理的时候，应该要对pg_data_t，zone，page等结构有一定的认识，可以参考下面的博文：

http://blog.chinaunix.net/uid-25845340-id-3023037.html

伙伴系统初始化的核心函数就是free_all_bootmem_core，bootmem的管理在bdata结构中，所以需要把它传下去

static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
{
	struct page *page;
	unsigned long start, end, pages, count = 0;

	if (!bdata->node_bootmem_map)  bootmem位图不存在，直接返回
		return 0;

	start = bdata->node_min_pfn;   
	end = bdata->node_low_pfn;

	pr_err("nid=%td start=%lx end=%lx\n",
		bdata - bootmem_node_data, start, end);

	while (start < end) {
		unsigned long *map, idx, vec;
		unsigned shift;

		map = bdata->node_bootmem_map;  获取map位图的首地址
		idx = start - bdata->node_min_pfn;  在map中起始页框的index
		shift = idx & (BITS_PER_LONG - 1); 如果不是32位对其的，则会产生shift
		/*
		 * vec holds at most BITS_PER_LONG map bits,
		 * bit 0 corresponds to start.
		 */
		vec = ~map[idx / BITS_PER_LONG];  map是整形数组，每个数组值能有32位，所以
                                                    在对其的情况下，idx / BITS_PER_LONG
                                                  的值就是32位对其的index值

		if (shift) {
			vec >>= shift;    如果不是32位对其的，需要做处理，这边没弄明白，
                                           感觉shift的位宽代的是那些页表位，把它左移掉是什么操
                                           做？
			if (end - start >= BITS_PER_LONG)
				vec |= ~map[idx / BITS_PER_LONG + 1] <<
					(BITS_PER_LONG - shift);
		}
		/*
		 * If we have a properly aligned and fully unreserved
		 * BITS_PER_LONG block of pages in front of us, free
		 * it in one go.
		 */
		if (IS_ALIGNED(start, BITS_PER_LONG) && vec == ~0UL) {如果32位对其，并且全
			int order = ilog2(BITS_PER_LONG);              是空闲的，则释放掉这
                                                                        32页
			__free_pages_bootmem(pfn_to_page(start), order);
			count += BITS_PER_LONG;
			start += BITS_PER_LONG;
		} else {
			unsigned long cur = start;      如果不全是空闲的，依次释放

			start = ALIGN(start + 1, BITS_PER_LONG);  取下一个32位的起始index
			while (vec && cur != start) {
				if (vec & 1) {
					page = pfn_to_page(cur);
					__free_pages_bootmem(page, 0);
					count++;
				}
				vec >>= 1;
				++cur;
			}
		}
	}

	page = virt_to_page(bdata->node_bootmem_map);  把bootmem中统计的空闲内存释放到
	pages = bdata->node_low_pfn - bdata->node_min_pfn; 伙伴系统以后，bootmem不需要了，把
	pages = bootmem_bootmap_pages(pages);              bootmem位图占用的空间释放掉
	count += pages;
	while (pages--)
		__free_pages_bootmem(page++, 0);

	pr_err("nid=%td released=%lx\n", bdata - bootmem_node_data, count);

	return count;
}

该函数的原理是，以BITS_PER_LONG为一个单位，32位，32个页面一组为单位进行查询，如果32个页面都是空的，则一起把这组页面释放掉，如果不全部是free的，则按个释放。

释放bootmem的函数

__free_pages_bootmem

----------->__free_pages(page, order);

__free_pages_bootmem中会依次调用每个page，把page->_count设为0，然后调用__free_pages，释放掉bootmem

void __free_pages(struct page *page, unsigned int order)
{
	if (put_page_testzero(page)) {
		if (order == 0)
			free_hot_cold_page(page, 0);
		else
			__free_pages_ok(page, order);
	}
}

在__free_pages中，如果只释放一个页，系统会把这个页释放到per_cpu_pages中，对于1页这样的数据，cpu为了加快内存管理速度，会先放入这个列表，如果多个页，则调用__free_pages_ok释放到伙伴管理系统中。先看一下__free_pages_ok如何调用

__free_pages_ok

---------->free_one_page

------------>__free_one_page

__free_one_page 是伙伴系统内存释放管理的核心函数：

static inline void __free_one_page(struct page *page,
		struct zone *zone, unsigned int order,
		int migratetype)
{
	unsigned long page_idx;
	unsigned long combined_idx;
	unsigned long uninitialized_var(buddy_idx);
	struct page *buddy;

	VM_BUG_ON(!zone_is_initialized(zone));

	if (unlikely(PageCompound(page)))
		if (unlikely(destroy_compound_page(page, order)))
			return;

	VM_BUG_ON(migratetype == -1);

	page_idx = page_to_pfn(page) & ((1 << MAX_ORDER) - 1);  找到当前页的页框，这边不明白
为什么还需要和MAX_ORDER与，取低位

	VM_BUG_ON(page_idx & ((1 << order) - 1));
	VM_BUG_ON(bad_range(zone, page));

	while (order < MAX_ORDER-1) {
		buddy_idx = __find_buddy_index(page_idx, order); 找到伙伴页的页框，伙伴页的页框和当前页的页框只有order那一位的值是不一样的
		buddy = page + (buddy_idx - page_idx); 取伙伴的page
		if (!page_is_buddy(page, buddy, order))   如果伙伴页不再当前zone，或者不空闲
			break;                            则返回，不再尝试合并伙伴，释放更大
		/*                                         页
		 * Our buddy is free or it is CONFIG_DEBUG_PAGEALLOC guard page,
		 * merge with it and move up one order.
		 */
		if (page_is_guard(buddy)) {    这个不调用，只有开了page debug才走
			clear_page_guard_flag(buddy);
			set_page_private(page, 0);
			__mod_zone_freepage_state(zone, 1 << order,
						  migratetype);
		} else {
			list_del(&buddy->lru);     释放伙伴，把伙伴页从当前order删除
			zone->free_area[order].nr_free--;
			rmv_page_order(buddy);
		}
		combined_idx = buddy_idx & page_idx;
		page = page + (combined_idx - page_idx);
		page_idx = combined_idx;   把order加1，和伙伴合并以后，变成更大的内存块，
		order++;                   尝试和更大的伙伴块进行合并
	}
	set_page_order(page, order);

	/*
	 * If this is not the largest possible page, check if the buddy
	 * of the next-highest order is free. If it is, it's possible
	 * that pages are being freed that will coalesce soon. In case,
	 * that is happening, add the free page to the tail of the list
	 * so it's less likely to be used soon and more likely to be merged
	 * as a higher order page
	 */
	if ((order < MAX_ORDER-2) && pfn_valid_within(page_to_pfn(buddy))) {
		struct page *higher_page, *higher_buddy;
		combined_idx = buddy_idx & page_idx;
		higher_page = page + (combined_idx - page_idx);
		buddy_idx = __find_buddy_index(combined_idx, order + 1);
		higher_buddy = higher_page + (buddy_idx - combined_idx);
		if (page_is_buddy(higher_page, higher_buddy, order + 1)) {
			list_add_tail(&page->lru,
				&zone->free_area[order].free_list[migratetype]);
			goto out;
		}
	}
        把当前块放入free_list，完成释放
	list_add(&page->lru, &zone->free_area[order].free_list[migratetype]);
out:
	zone->free_area[order].nr_free++;
}

所谓伙伴内存，如果第一块内存为4K，那么紧接着他后面的那块4K 内存，则属于他的伙伴，如果这两块内存都空闲，则可以合并起来，变成一块更大的8K内存，两个伙伴，必然处于2的order次方和2的order+1次方之间。关于伙伴更详细的解释以及伙伴系统对于伙伴的处理，参考下面的链接：

https://blog.csdn.net/geshifei/article/details/81914115

__free_one_page主要完成的功能是，查找当前要释放内存块的伙伴块，判断这两个伙伴块是否可以合并成一个更大的伙伴块，把小的块不断的合并成更大的块，有助于减少内存碎片，直到无法再找到连续的可合并的内存块，则把这个page 内存块挂到当前order级别的free_list中。

再来看一下每次释放一个页时调用的free_hot_cold_page：

void free_hot_cold_page(struct page *page, int cold)
{
	struct zone *zone = page_zone(page);
	struct per_cpu_pages *pcp;
	unsigned long flags;
	int migratetype;

	if (!free_pages_prepare(page, 0))
		return;

	migratetype = get_pageblock_migratetype(page);
	set_freepage_migratetype(page, migratetype);
	local_irq_save(flags);
	__count_vm_event(PGFREE);

	/*
	 * We only track unmovable, reclaimable and movable on pcp lists.
	 * Free ISOLATE pages back to the allocator because they are being
	 * offlined but treat RESERVE as movable pages so we can get those
	 * areas back if necessary. Otherwise, we may have to free
	 * excessively into the page allocator
	 */
	if (migratetype >= MIGRATE_PCPTYPES) {
		if (unlikely(is_migrate_isolate(migratetype))) {
			free_one_page(zone, page, 0, migratetype);
			goto out;
		}
		migratetype = MIGRATE_MOVABLE;
	}

	pcp = &this_cpu_ptr(zone->pageset)->pcp;
	if (cold)
		list_add_tail(&page->lru, &pcp->lists[migratetype]);
	else
		list_add(&page->lru, &pcp->lists[migratetype]);   把当前页挂载
                                                                 到&pcp->lists链表中
	pcp->count++;
	if (pcp->count >= pcp->high) {   如果pcp中挂载的空闲页大于某个值时，则需要回收一部
		free_pcppages_bulk(zone, pcp->batch, pcp);    分页
		pcp->count -= pcp->batch;
	}

out:
	local_irq_restore(flags);
}

可以看到会把要释放的page放入pcp->lists中，而且如果pcp->lists中的页面数量超过某个值，就会调用free_pcppages_bulk回收一部分page，放入伙伴系统中。关于这部分代码，更详细的解释，参考下面的链接：

http://blog.chinaunix.net/uid-25845340-id-3039220.html

二：伙伴系统内存分配

当伙伴系统初始化完毕以后，就可以利用伙伴系统来分配内存了。伙伴系统最外层内存分配函数有好几个api，但是最终都会调用到一个核心函数__alloc_pages_nodemask：

struct page *
__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
			struct zonelist *zonelist, nodemask_t *nodemask)
{
	enum zone_type high_zoneidx = gfp_zone(gfp_mask);
	struct zone *preferred_zone;
	struct page *page = NULL;
	int migratetype = allocflags_to_migratetype(gfp_mask);
	unsigned int cpuset_mems_cookie;
	int alloc_flags = ALLOC_WMARK_LOW|ALLOC_CPUSET;
	struct mem_cgroup *memcg = NULL;

	gfp_mask &= gfp_allowed_mask;

	lockdep_trace_alloc(gfp_mask);

	might_sleep_if(gfp_mask & __GFP_WAIT);

	if (should_fail_alloc_page(gfp_mask, order))
		return NULL;

	/*
	 * Check the zones suitable for the gfp_mask contain at least one
	 * valid zone. It's possible to have an empty zonelist as a result
	 * of GFP_THISNODE and a memoryless node
	 */
	if (unlikely(!zonelist->_zonerefs->zone))
		return NULL;

	/*
	 * Will only have any effect when __GFP_KMEMCG is set.  This is
	 * verified in the (always inline) callee
	 */
	if (!memcg_kmem_newpage_charge(gfp_mask, &memcg, order))
		return NULL;

retry_cpuset:
	cpuset_mems_cookie = get_mems_allowed();

	/* The preferred zone is used for statistics later */
	first_zones_zonelist(zonelist, high_zoneidx,
				nodemask ? : &cpuset_current_mems_allowed,
				&preferred_zone);  选取一个合适的zonelist，进行分配
	if (!preferred_zone)
		goto out;

#ifdef CONFIG_CMA
	if (allocflags_to_migratetype(gfp_mask) == MIGRATE_MOVABLE)
		alloc_flags |= ALLOC_CMA;
#endif
	/* First allocation attempt */
	page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, nodemask, order,
			zonelist, high_zoneidx, alloc_flags,
			preferred_zone, migratetype);  第一次尝试分配
	if (unlikely(!page)) {
		/*
		 * Runtime PM, block IO and its error handling path
		 * can deadlock because I/O on the device might not
		 * complete.
		 */
		gfp_mask = memalloc_noio_flags(gfp_mask);
		page = __alloc_pages_slowpath(gfp_mask, order,
				zonelist, high_zoneidx, nodemask,
				preferred_zone, migratetype);  如果第一次尝试分配失败，
	}                                                      则使用慢速分配的方式再进行
                                                                尝试分配
	trace_mm_page_alloc(page, order, gfp_mask, migratetype);

out:
	/*
	 * When updating a task's mems_allowed, it is possible to race with
	 * parallel threads in such a way that an allocation can fail while
	 * the mask is being updated. If a page allocation is about to fail,
	 * check if the cpuset changed during allocation and if so, retry.
	 */
	if (unlikely(!put_mems_allowed(cpuset_mems_cookie) && !page))
		goto retry_cpuset;

	memcg_kmem_commit_charge(page, memcg, order);

	return page;
}

上面函数主要比较重要的是两个函数，get_page_from_freelist和__alloc_pages_slowpath，称为快速分配和慢速分配，所谓的快速分配就是直接从现有的内存中去分配，如果不成功，再去尝试慢速分配。慢速分配把会进行内存压缩，回收，然后再去尝试分配内存。先看get_page_from_freelist

static struct page *
get_page_from_freelist(gfp_t gfp_mask, nodemask_t *nodemask, unsigned int order,
		struct zonelist *zonelist, int high_zoneidx, int alloc_flags,
		struct zone *preferred_zone, int migratetype)
{
	struct zoneref *z;
	struct page *page = NULL;
	int classzone_idx;
	struct zone *zone;
	nodemask_t *allowednodes = NULL;/* zonelist_cache approximation */
	int zlc_active = 0;		/* set if using zonelist_cache */
	int did_zlc_setup = 0;		/* just call zlc_setup() one time */

	classzone_idx = zone_idx(preferred_zone);
zonelist_scan:
	/*
	 * Scan zonelist, looking for a zone with enough free.
	 * See also cpuset_zone_allowed() comment in kernel/cpuset.c.
	 */
        遍历zonelist中的zone
	for_each_zone_zonelist_nodemask(zone, z, zonelist,
						high_zoneidx, nodemask) { 
		if (IS_ENABLED(CONFIG_NUMA) && zlc_active &&
			!zlc_zone_worth_trying(zonelist, z, allowednodes))
				continue;
		if ((alloc_flags & ALLOC_CPUSET) &&
			!cpuset_zone_allowed_softwall(zone, gfp_mask))
				continue;
		/*
		 * When allocating a page cache page for writing, we
		 * want to get it from a zone that is within its dirty
		 * limit, such that no single zone holds more than its
		 * proportional share of globally allowed dirty pages.
		 * The dirty limits take into account the zone's
		 * lowmem reserves and high watermark so that kswapd
		 * should be able to balance it without having to
		 * write pages from its LRU list.
		 *
		 * This may look like it could increase pressure on
		 * lower zones by failing allocations in higher zones
		 * before they are full.  But the pages that do spill
		 * over are limited as the lower zones are protected
		 * by this very same mechanism.  It should not become
		 * a practical burden to them.
		 *
		 * XXX: For now, allow allocations to potentially
		 * exceed the per-zone dirty limit in the slowpath
		 * (ALLOC_WMARK_LOW unset) before going into reclaim,
		 * which is important when on a NUMA setup the allowed
		 * zones are together not big enough to reach the
		 * global limit.  The proper fix for these situations
		 * will require awareness of zones in the
		 * dirty-throttling and the flusher threads.
		 */
		if ((alloc_flags & ALLOC_WMARK_LOW) &&
		    (gfp_mask & __GFP_WRITE) && !zone_dirty_ok(zone))
			goto this_zone_full;

		BUILD_BUG_ON(ALLOC_NO_WATERMARKS < NR_WMARK);
		if (!(alloc_flags & ALLOC_NO_WATERMARKS)) {
			unsigned long mark;
			int ret;

			mark = zone->watermark[alloc_flags & ALLOC_WMARK_MASK];
			if (zone_watermark_ok(zone, order, mark,
				    classzone_idx, alloc_flags))
				goto try_this_zone;
                        检查当前zone的水位是否符合分配条件，如果符合，则在这个zone中尝试分配
			if (IS_ENABLED(CONFIG_NUMA) &&
					!did_zlc_setup && nr_online_nodes > 1) {
				/*
				 * we do zlc_setup if there are multiple nodes
				 * and before considering the first zone allowed
				 * by the cpuset.
				 */
				allowednodes = zlc_setup(zonelist, alloc_flags);
				zlc_active = 1;
				did_zlc_setup = 1;
			}

			if (zone_reclaim_mode == 0 ||
			    !zone_allows_reclaim(preferred_zone, zone))
				goto this_zone_full;

			/*
			 * As we may have just activated ZLC, check if the first
			 * eligible zone has failed zone_reclaim recently.
			 */
			if (IS_ENABLED(CONFIG_NUMA) && zlc_active &&
				!zlc_zone_worth_trying(zonelist, z, allowednodes))
				continue;
                        如果走到这个地方，说明当前的内存已经不多了，需要回收
			ret = zone_reclaim(zone, gfp_mask, order);
			switch (ret) {
			case ZONE_RECLAIM_NOSCAN:
				/* did not scan */
				continue;
			case ZONE_RECLAIM_FULL:
				/* scanned but unreclaimable */
				continue;
			default:
				/* did we reclaim enough */
				if (zone_watermark_ok(zone, order, mark,
						classzone_idx, alloc_flags))
					goto try_this_zone;
                                回收完以后，满足水位，则再次尝试分配
				/*
				 * Failed to reclaim enough to meet watermark.
				 * Only mark the zone full if checking the min
				 * watermark or if we failed to reclaim just
				 * 1<<order pages or else the page allocator
				 * fastpath will prematurely mark zones full
				 * when the watermark is between the low and
				 * min watermarks.
				 */
				if (((alloc_flags & ALLOC_WMARK_MASK) == ALLOC_WMARK_MIN) ||
				    ret == ZONE_RECLAIM_SOME)
					goto this_zone_full;

				continue;
			}
		}

try_this_zone:
                真正的内存分配函数
		page = buffered_rmqueue(preferred_zone, zone, order,
						gfp_mask, migratetype);
		if (page)
			break;
this_zone_full:
		if (IS_ENABLED(CONFIG_NUMA))
			zlc_mark_zone_full(zonelist, z);
	}

	if (unlikely(IS_ENABLED(CONFIG_NUMA) && page == NULL && zlc_active)) {
		/* Disable zlc cache for second zonelist scan */
		zlc_active = 0;
		goto zonelist_scan;
	}

	if (page)
		/*
		 * page->pfmemalloc is set when ALLOC_NO_WATERMARKS was
		 * necessary to allocate the page. The expectation is
		 * that the caller is taking steps that will free more
		 * memory. The caller should avoid the page being used
		 * for !PFMEMALLOC purposes.
		 */
		page->pfmemalloc = !!(alloc_flags & ALLOC_NO_WATERMARKS);

	return page;
}

上面函数会检查当前区的水位，如果满足分配条件，则直接调用buffered_rmqueue进行分配，否则可能则需要调用内存回收函数，然后再尝试分配。

static inline
struct page *buffered_rmqueue(struct zone *preferred_zone,
			struct zone *zone, int order, gfp_t gfp_flags,
			int migratetype)
{
	unsigned long flags;
	struct page *page;
	int cold = !!(gfp_flags & __GFP_COLD);

again:
	if (likely(order == 0)) {
		struct per_cpu_pages *pcp;
		struct list_head *list;

		local_irq_save(flags);先尝试从cpu缓存链表中进行分配
		pcp = &this_cpu_ptr(zone->pageset)->pcp;
		list = &pcp->lists[migratetype];
		if (list_empty(list)) {缓存链表为空，尝试从zone中分配一些空间给缓存链表
			pcp->count += rmqueue_bulk(zone, 0,
					pcp->batch, list,
					migratetype, cold);
			if (unlikely(list_empty(list)))
				goto failed;
		}

		if (cold)  重新从缓存链表中取页
			page = list_entry(list->prev, struct page, lru);
		else
			page = list_entry(list->next, struct page, lru);

		list_del(&page->lru);
		pcp->count--;
	} else {
		if (unlikely(gfp_flags & __GFP_NOFAIL)) {
			/*
			 * __GFP_NOFAIL is not to be used in new code.
			 *
			 * All __GFP_NOFAIL callers should be fixed so that they
			 * properly detect and handle allocation failures.
			 *
			 * We most definitely don't want callers attempting to
			 * allocate greater than order-1 page units with
			 * __GFP_NOFAIL.
			 */
			WARN_ON_ONCE(order > 1);
		}
		spin_lock_irqsave(&zone->lock, flags);当分配大于一页的时候，调用如下函数
		page = __rmqueue(zone, order, migratetype);
		spin_unlock(&zone->lock);
		if (!page)
			goto failed;
		__mod_zone_freepage_state(zone, -(1 << order),
					  get_pageblock_migratetype(page));
	}

	__count_zone_vm_events(PGALLOC, zone, 1 << order);
	zone_statistics(preferred_zone, zone, gfp_flags);
	local_irq_restore(flags);

	VM_BUG_ON(bad_range(zone, page));
	if (prep_new_page(page, order, gfp_flags))
		goto again;
	return page;

failed:
	local_irq_restore(flags);
	return NULL;
}

当order为0，只分配一页的时候，直接尝试从cpu缓存链表中去取，如果cpu缓存链表为空，则从zone中取出pcp->batch页放到cpu缓存链表中，再用该内存进行分配，如果大于一页，则直接调用__rmqueue从zone中分配内存。

释放内存到cpu缓存链表中的函数为rmqueue_bulk，调用关系

rmqueue_bulk

-------->__rmqueue

rmqueue_bulk只是对__rmqueue的封装，在order为0的情况下分配多个页给cpu缓存链表。

static struct page *__rmqueue(struct zone *zone, unsigned int order,
						int migratetype)
{
	struct page *page;

retry_reserve:  先尝试用指定migratetype进行分配
	page = __rmqueue_smallest(zone, order, migratetype);

	if (unlikely(!page) && migratetype != MIGRATE_RESERVE) {
		page = __rmqueue_fallback(zone, order, migratetype);
再尝试用migratetype表进行分配
		/*
		 * Use MIGRATE_RESERVE rather than fail an allocation. goto
		 * is used because __rmqueue_smallest is an inline function
		 * and we want just one call site
		 */
		if (!page) {
			migratetype = MIGRATE_RESERVE;
			goto retry_reserve;
		}
	}

	trace_mm_page_alloc_zone_locked(page, order, migratetype);
	return page;
}

先尝试用指定的migratetype类型取分配，如果不行，再尝试用其他的migratetype表进行分配。

static inline
struct page *__rmqueue_smallest(struct zone *zone, unsigned int order,
						int migratetype)
{
	unsigned int current_order;
	struct free_area * area;
	struct page *page;

	/* Find a page of the appropriate size in the preferred list */
	for (current_order = order; current_order < MAX_ORDER; ++current_order) {
		area = &(zone->free_area[current_order]);
		if (list_empty(&area->free_list[migratetype]))
			continue;

		page = list_entry(area->free_list[migratetype].next,
							struct page, lru);
		list_del(&page->lru);找到可以分配的order，从当前链表中删除该order
		rmv_page_order(page); 取消分配的内存的order值
		area->nr_free--;
		expand(zone, page, order, current_order, area, migratetype);
                如果分配的order比较大，把order再分成几块，空闲order继续放入伙伴系统中
		return page;
	}

	return NULL;
}

在调用__rmqueue_smallest进行分配的时候，有可能找不到指定order值的内存块，那么则需要找更大的order值的内存块来进行分配。而更大的order值。必定会产生小的空闲的内存块，所以调用expand把空闲的内存继续放到伙伴系统中。

static inline void expand(struct zone *zone, struct page *page,
	int low, int high, struct free_area *area,
	int migratetype)
{       low为需要分配的内存块大小，high当前分配的内存块大小
	unsigned long size = 1 << high;

	while (high > low) {  high大于low，必然会出现空闲内存
		area--;
		high--;
		size >>= 1;
		VM_BUG_ON(bad_range(zone, &page[size]));

#ifdef CONFIG_DEBUG_PAGEALLOC
		if (high < debug_guardpage_minorder()) {
			/*
			 * Mark as guard pages (or page), that will allow to
			 * merge back to allocator when buddy will be freed.
			 * Corresponding page table entries will not be touched,
			 * pages will stay not present in virtual address space
			 */
			INIT_LIST_HEAD(&page[size].lru);
			set_page_guard_flag(&page[size]);
			set_page_private(&page[size], high);
			/* Guard pages are not available for any usage */
			__mod_zone_freepage_state(zone, -(1 << high),
						  migratetype);
			continue;
		}
#endif
                page偏移size，放入伙伴系统
		list_add(&page[size].lru, &area->free_list[migratetype]);
		area->nr_free++;
		set_page_order(&page[size], high);
	}
}

__rmqueue_fallback函数也是很清晰的，从fallbacks链表中取出不同的migratetype，然后查找zone的不同MIGRATE域的free_list来分配内存，如果分配成功大内存，则使用expand再回收一部分内存。这部分代码更详细的说明，参考如下博文：

http://blog.chinaunix.net/uid-25845340-id-3039220.html

回过来再看__alloc_pages_slowpath函数：

static inline struct page *
__alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
	struct zonelist *zonelist, enum zone_type high_zoneidx,
	nodemask_t *nodemask, struct zone *preferred_zone,
	int migratetype)
{
	const gfp_t wait = gfp_mask & __GFP_WAIT;
	struct page *page = NULL;
	int alloc_flags;
	unsigned long pages_reclaimed = 0;
	unsigned long did_some_progress;
	bool sync_migration = false;
	bool deferred_compaction = false;
	bool contended_compaction = false;

	/*
	 * In the slowpath, we sanity check order to avoid ever trying to
	 * reclaim >= MAX_ORDER areas which will never succeed. Callers may
	 * be using allocators in order of preference for an area that is
	 * too large.
	 */
	if (order >= MAX_ORDER) {
		WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN));
		return NULL;
	}

	/*
	 * GFP_THISNODE (meaning __GFP_THISNODE, __GFP_NORETRY and
	 * __GFP_NOWARN set) should not cause reclaim since the subsystem
	 * (f.e. slab) using GFP_THISNODE may choose to trigger reclaim
	 * using a larger set of nodes after it has established that the
	 * allowed per node queues are empty and that nodes are
	 * over allocated.
	 */
	if (IS_ENABLED(CONFIG_NUMA) &&
			(gfp_mask & GFP_THISNODE) == GFP_THISNODE)
		goto nopage;

restart:
	if (!(gfp_mask & __GFP_NO_KSWAPD))
		wake_all_kswapd(order, zonelist, high_zoneidx,
						zone_idx(preferred_zone));

	/*
	 * OK, we're below the kswapd watermark and have kicked background
	 * reclaim. Now things get more complex, so set up alloc_flags according
	 * to how we want to proceed.
	 */
	alloc_flags = gfp_to_alloc_flags(gfp_mask);

	/*
	 * Find the true preferred zone if the allocation is unconstrained by
	 * cpusets.
	 */
	if (!(alloc_flags & ALLOC_CPUSET) && !nodemask)
		first_zones_zonelist(zonelist, high_zoneidx, NULL,
					&preferred_zone);

rebalance:
	/* This is the last chance, in general, before the goto nopage. */
        尝试进行内存分配
	page = get_page_from_freelist(gfp_mask, nodemask, order, zonelist,
			high_zoneidx, alloc_flags & ~ALLOC_NO_WATERMARKS,
			preferred_zone, migratetype);
	if (page)
		goto got_pg;

	/* Allocate without watermarks if the context allows */
	if (alloc_flags & ALLOC_NO_WATERMARKS) {
		/*
		 * Ignore mempolicies if ALLOC_NO_WATERMARKS on the grounds
		 * the allocation is high priority and these type of
		 * allocations are system rather than user orientated
		 */
		zonelist = node_zonelist(numa_node_id(), gfp_mask);
                如果设置了ALLOC_NO_WATERMARKS标志位的前提下，则不会管zone中的水位，再次尝试分配
		page = __alloc_pages_high_priority(gfp_mask, order,
				zonelist, high_zoneidx, nodemask,
				preferred_zone, migratetype);
		if (page) {
			goto got_pg;
		}
	}

	/* Atomic allocations - we can't balance anything */
	if (!wait)
		goto nopage;

	/* Avoid recursion of direct reclaim */
	if (current->flags & PF_MEMALLOC)
		goto nopage;

	/* Avoid allocations with no watermarks from looping endlessly */
	if (test_thread_flag(TIF_MEMDIE) && !(gfp_mask & __GFP_NOFAIL))
		goto nopage;

	/*
	 * Try direct compaction. The first pass is asynchronous. Subsequent
	 * attempts after direct reclaim are synchronous
	 */
        对内存进行压缩。压缩完以后再尝试进行分配
	page = __alloc_pages_direct_compact(gfp_mask, order,
					zonelist, high_zoneidx,
					nodemask,
					alloc_flags, preferred_zone,
					migratetype, sync_migration,
					&contended_compaction,
					&deferred_compaction,
					&did_some_progress);
	if (page)
		goto got_pg;
	sync_migration = true;

	/*
	 * If compaction is deferred for high-order allocations, it is because
	 * sync compaction recently failed. In this is the case and the caller
	 * requested a movable allocation that does not heavily disrupt the
	 * system then fail the allocation instead of entering direct reclaim.
	 */
	if ((deferred_compaction || contended_compaction) &&
						(gfp_mask & __GFP_NO_KSWAPD))
		goto nopage;

	/* Try direct reclaim and then allocating */
        对内存进行回收。回收完以后再尝试进行分配
	page = __alloc_pages_direct_reclaim(gfp_mask, order,
					zonelist, high_zoneidx,
					nodemask,
					alloc_flags, preferred_zone,
					migratetype, &did_some_progress);
	if (page)
		goto got_pg;

	/*
	 * If we failed to make any progress reclaiming, then we are
	 * running out of options and have to consider going OOM
	 */
	if (!did_some_progress) {
		if ((gfp_mask & __GFP_FS) && !(gfp_mask & __GFP_NORETRY)) {
			if (oom_killer_disabled)
				goto nopage;
			/* Coredumps can quickly deplete all memory reserves */
			if ((current->flags & PF_DUMPCORE) &&
			    !(gfp_mask & __GFP_NOFAIL))
				goto nopage;
                        尝试杀死某些进程来回收内存，并再次进行分配
			page = __alloc_pages_may_oom(gfp_mask, order,
					zonelist, high_zoneidx,
					nodemask, preferred_zone,
					migratetype);
			if (page)
				goto got_pg;

			if (!(gfp_mask & __GFP_NOFAIL)) {
				/*
				 * The oom killer is not called for high-order
				 * allocations that may fail, so if no progress
				 * is being made, there are no other options and
				 * retrying is unlikely to help.
				 */
				if (order > PAGE_ALLOC_COSTLY_ORDER)
					goto nopage;
				/*
				 * The oom killer is not called for lowmem
				 * allocations to prevent needlessly killing
				 * innocent tasks.
				 */
				if (high_zoneidx < ZONE_NORMAL)
					goto nopage;
			}

			goto restart;
		}
	}

	/* Check if we should retry the allocation */
	pages_reclaimed += did_some_progress;
	if (should_alloc_retry(gfp_mask, order, did_some_progress,
						pages_reclaimed)) {
		/* Wait for some write requests to complete then retry */
		wait_iff_congested(preferred_zone, BLK_RW_ASYNC, HZ/50);
		goto rebalance;
	} else {
		/*
		 * High-order allocations do not necessarily loop after
		 * direct reclaim and reclaim/compaction depends on compaction
		 * being called after reclaim so call directly if necessary
		 */
		page = __alloc_pages_direct_compact(gfp_mask, order,
					zonelist, high_zoneidx,
					nodemask,
					alloc_flags, preferred_zone,
					migratetype, sync_migration,
					&contended_compaction,
					&deferred_compaction,
					&did_some_progress);
		if (page)
			goto got_pg;
	}

nopage:
	warn_alloc_failed(gfp_mask, order, NULL);
	return page;
got_pg:
	if (kmemcheck_enabled)
		kmemcheck_pagealloc_alloc(page, order, gfp_mask);

	return page;
}

上面的函数在内存可能短缺的情况下，采取多种手段来回收内存，并重新进行分配。更详细的说明，参考如下博文：

http://blog.chinaunix.net/uid-25845340-id-3033899.html

oqqYuJi12345678

关注

0
点赞
踩
1

收藏

觉得还不错? 一键收藏
0
评论
linux3.10 内存管理（二）伙伴系统内存管理详解

一：伙伴系统的初始化函数系统初始化的时候，会进行如下的调用关系来初始化伙伴管理系统：start_kernel ---------->mm_init ----------->mem_init在mem_init函数中，会把之前使用的bootmem 里面管理的空闲内存释放到伙伴系统中，初始化完伙伴系统以后，内存管理就由伙伴系统来接管。voi...
复制链接

扫一扫

专栏目录