peng524542080的专栏

FR586x datasheet MCU :TI MCU FR586x datasheet

树莓派3串口操作例子源码;串口操作例子源码

uCLinux操作系统实验-驱动程序和源代码

imx6-yotco-src/fsl-yocto-L4.1.15_2.1.0-ga/i.MX_Linux_User's_Guide.pdf

功能描述：本例程实验进入停止模式方式，并使用PA9连接的外部中断通道9来唤醒 现 象：上电后，灯闪烁4次后停止，表明进入停止模式，按下按钮，唤醒MCU，灯闪烁8次后又停止进入停止模式。

This is a Kernel module for uClinux 2.4.x . This module let uClinux 2.4.x can use pwm.

For in application programming the IAP routine should be called with a word pointer in register r0 pointing to memory (RAM) containing command code and parameters. Result of the IAP command is returned in the result table pointed to by register r1. The user can reuse the command table for result by passing the same pointer in registers r0 and r1. The parameter table should be big enough to hold all the results in case if number of results are more than number of parameters. Parameter passing is illustrated in the Figure 32–136. The number of parameters and results vary according to the IAP command. The maximum number of parameters is 5, passed to the "Copy RAM to Flash" command. The maximum number of results is 4, returned by the "Read device serial number" command. The command handler sends the status code INVALID_COMMAND when an undefined command is received. The IAP routine resides at 0x1FFF FFF0 location. The IAP function could be called in the following way using C. Define the IAP location entry

MiniGUI项目的最初目标是为基于Linux的实时嵌入式操作系统提供一个轻量级的图形用户界面支持系统，发展到今天，MiniGUI已进入成熟和稳定阶段，并且所支持的操作系统已不仅仅限于Linux，它还可以在uClinux、uC/OS-II、eCos、VxWorks等系统上运行。