THHN vs. XHHW: What Is the Difference?

转贴文章，文章来自：

THHN vs. XHHW: What Is the Difference? | Multicom (multicominc.com)

When designing and building a new facility or machine, engineers need to fully understand the specifications – the strengths and weaknesses of each wire available for the job. The biggest challenge for an engineer is to balance the best wire for the project and the budget.

THHN / THWN / THWN-2 and XHHW / XHHW-2 – are a lot of letters to understand, but they are two common types of building wire, and it’s critical to understand the differences between the two in order to choose the best wire for your application.

Below is a simple chart comparing some of the specifications, and differences:

As you can see, XHHW-2 has a much higher tolerance for heat – an important factor to consider.

THHN / THWN / THWN-2

THHN	THWN	THWN-2
T = Thermoplastic HH = High Heat Resistance N = Nylon Coated Temp Rating: 90° C in dry locations	T = Thermoplastic H = Heat and W = Water Resistance N = Nylon Coated Temp Rating: 90° C in dry locations and 75° C in wet locations	T = Thermoplastic H = Heat and W = Water Resistance N = Nylon Coated Temp Rating: 90° C in both dry and wet locations

The most popular type of building wire used in construction is Thermoplastic High Heat-resistant Nylon coated (THHN) wire. THHN wire is also commonly used in machine tools, control circuits and some appliances.

THHN wire comes in a variety of characteristics:

• Conductors: Depending on the size can be either stranded or solid
• Wire material: Copper or aluminum
• Jacket: Polyvinylchloride (PVC) insulation with a nylon jacket

Aside from the mechanical protection, a nylon jacket protects the wire from abrasion as it’s pulled through conduit. In addition, the jacket protects the wire from hydrocarbons such as oil, gasoline and grease. The tough nylon jacket also protects the wire from being puncture or accidentally cut as it protects the insulation.

THHN wire is approved for up to 600V and is listed by Underwriters Laboratory (UL), as rated for 90° C (194° F) in dry and 75° C (167° F) in wet environments. THHN wire comes with a dual rating: THHN / THWN, which means it’s appropriate for both dry and wet applications.

XHHW and XHHW-2

XHHW	XHHW-2
X = Cross-Linked Polyethylene (XLPE) HH = High Heat-Resistance W = Water Resistance Temp Rating: 90° C in dry locations and 75° C in wet locations	X = Cross-Linked Polyethylene (XLPE) HH = High Heat-Resistance W = Water Resistance Temp Rating: 90° C in both dry and wet locations

XHHW-2 wire is the next generation XHHW wire. While its main use is for residential, commercial and industrial buildings, it is also used in raceways, feeder and circuit wiring.

• Conductors: Copper or aluminum
• Wire: Solid or stranded cable – stranded wire is used to maintain flexibility

XHHW-2 is approved for use up to 600V and is UL Listed for 90° C (194° F), in both dry and wet locations. The previous generation of XHHW had a lower temperature rating, approved up to 75° C in wet environments, making the next generation XHHW-2 wire a more useful and an ‘all environment’-type product.

Comparison:

Wire and Jacket Insulation:

In addition to the specifications noted above, the main difference between THHN / THWN / THWN-2 and XHHW / XHHW-2 and is in the wire’s jacket. The jacket on the THHN family is thinner – this means that while more THHN can be fit through many obstacles, its jacket doesn’t offer as much protection as the XHHW jacket. As well, the coating on the XHHW’s jacket is more resistant to chemicals, ozone and abrasions while THHN’s thinner coating, under extreme conditions, can lead to current leakage and can break down from chemical or environmental exposure, emitting a toxic smoke when burned.

Flexibility:

Surprisingly, even though XHHW has a thicker and more protective jacket, it is also more flexible than THHN wire. This is due to the XLPE insulation of the XHHW allowing the cable to bend and flex more easily than the PVC insulation of the THHN – making XHHW much easier to work with during the installation process.

Final Thoughts:

As always, the decision between using THHN or XHHW comes down to weighing performance versus budget. Our customers often express that the more popular and less expensive THHN wire is perfectly suitable for what they need. On the other hand, XHHW has the additional features that provide increased efficiency and extended longevity.

 

The insulating materials commonly used to cover copper wire (and other) electrical conductors fall into two broad classes: Thermoplasticand Thermoset.

What’s the difference?

If we take a look at our Fundamentals of Rome Wire and Cable Manual (yes, it’s from a long time ago but yes, it’s still entirely applicable), we have the following descriptions:

Thermoplastic: This material is one that will soften and even melt when exposed to a sufficiently high temperature.  In other words, when the material is originally compounded, it becomes relatively hard yet pliable, much like most plastics we encounter in our daily lives.  However, if it is exposed to high temperature at some future time, it softens and melts. The major reason for selecting a thermoplastic material is because it is the most economical type of insulation.

Some of the commonly used thermoplastic insulations used nowadays:

• PVC (Polyvinyl Chloride)
• PE (Polyethylene)
• ECTFE
• PVDF
• Nylon

Thermoset:This material, on the other hand, does not soften when exposed to high temperatures.  Once it’s compounded and cured, it becomes “rubbery” and retains its properties even when exposed to high temperatures….Thermoset insulations are usually used where the wire or cable will be exposed to high temperatures.

Some thermoset insulations often used are:

• XLPE
• CPE
• EPR