为什么继电器用K标识,断路器用Q表示

Item Designations; or "Why are relays called 'K' in schematics? Why are circuit breakers called 'Q'?"

Short answer

The prefixes ‘K’ and ‘Q’ are from standards about ‘item designation’.

Countries using European standards started out using IEC 60750, Item designation in electrotechnology. Countries using American standards use IEEE Std 315-1975 / ANSI Y32.2, Graphic symbols for electrical and electronic diagrams.

Relays are called ‘K’ because IEC 60750 and IEEE 315 say so.

This is a rare case of European standards agreeing with American standards!

I haven’t found any reason why the letter ‘K’ was used in particular. I had guessed the letter ‘K’ was assigned by a German-speaker who pronounced ‘relay coil’ as ‘koil’, and ‘contactor’ as ‘kontaktor’. Unfortunately, ‘relay coil’ translates to ‘relaisspule’ and ‘contactor’ translates to ‘schütz’. Neither of those words start with ‘K’, which sinks my theory.

Similarly, circuit breakers are called ‘Q’ because IEC 60750 says so.

IEEE 315 doesn’t agree with the use of ‘Q’ - the IEEE standard calls circuit breakers ‘CB’, which is arguably a more logical choice.


Longer answer

There are standardised “Letter codes for the designation of kind of item”.

In Australia, we use letter codes based on AS 3702, “Item designation in electrotechnology”. AS 3702 is essentially IEC 60750 with some extra information in the appendices.

AS 3702-1989: TABLE 1: LETTER CODES FOR THE DESIGNATION OF KIND OF ITEM

Letter codeKind of item
AAssemblies, subassemblies
BTransducers
CCapacitors
DBinary elements, delay devices, storage devices
EMiscellaneous
FProtective devices
GGenerators, power supplies
HSignalling devices
J
KRelays, contactors
LInductors, reactors
MMotors
NAnalogue elements
PMeasuring equipment, testing equipment
QSwitching devices for power circuits
RResistors
SSwitching devices for control circuits, selector switches
TTransformers, voltage regulators (power)
UModulators, changers
VTubes, semiconductors
WTransmission paths, waveguides, antennas
XTerminals, plugs, sockets
YElectrically operated mechanical devices
ZNetworks, hybrid transformers, filters, equalizers, limiters

Most of the letter codes are fairly intuitive.

Other letter codes are less intuitive.

  • B for transducers.
  • K for relays and contactors.
  • V for tubes and semiconductors. (Consider “V” for “vacuum tube”.)
  • Q for “switching devices for power circuits”, i.e. circuit breakers.

There are also some strange interactions between over-lapping groups. For example, lamps are generally designated “E” for miscellaneous items. However, LEDs are both a lamp and a semiconductor, so AS 3702 Table 2, Alphabetical list of items and their letter codes, puts LEDs under letter code “V” for semi-conductors.

It appears that the later standards, IEC 61346 and then IEC 81346, attempted to make the letter codes more general. There is still some fuzzy overlap between categories. For example, IEC 81346 uses letter ‘E’ for anything that “provides radiant or thermal energy”, which includes lamps, or ‘P’ for devices which ‘present information’, like indication lamps or LEDs.

The other aspect of IEC 81346 is that it tries to cover both mechanical/fluid items and electrical items. This generalization means some of the electrical-only code letters have changed meaning, or been removed entirely. For example, inductors are now grouped into letter ‘R’ with resistors, and ‘L’ is no longer used for anything.


Historical notes

The original IEC standard was IEC 60113:1959, which was superseded by IEC 60750:1983. AS 3702:1989 derives from IEC 60750.

IEC 60750 was superceded by the IEC 61346 series (1996), which was superceded by the IEC 81346 series (2009) in turn. IEC 81346 is about 300 pages - much larger than AS 3702, which is only 24 pages! If you are only interested in the “letter codes for the kind of item”, skip straight to IEC 81346-2:2009 Table 1, Classes of object according to their intended purpose or task.


References

  • AS 3702-1989 - “Item designation in electrotechnology”. Equivalent to IEC 60750 Ed 1.0 (1983).
  • AS 1103.2-1982 - “Diagrams charts and tables for electrotechnology, Part 2: Item Designation” (Superseded by AS 3702-1989.)
  • IEC 750-1983 - AS 3702 is equivalent, but provides extra information.
  • IEC 113 (superseded by IEC 750, i.e. IEC 60750.)
  • IEEE Std 315-1975 / ANSI Standard Y32.2. Annex F: “Cross reference list of Class Designation Letters” compares IEC 113-2:1971 to the IEEE/ANSI standard. Note IEEE Std 315 is a standard for both graphical symbols, and class designation letters.
  • AS 1102 and IEC 60617 for “Graphical Symbols for Electrotechnology”.

 

  • 0
    点赞
  • 2
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值